Samsung Ud55ep Manual

							11
Operation
Warning
There is a high voltage inside the product. Never disassemble, repair or 
modify the product yourself.
 •A fire or electric shock may result.
 •
Contact Samsung Customer Service Center for repairs.
!
Before moving the product, turn off the power switch and disconnect the 
power cable and all other connected cables.
 •Damage to the cord may result in a fire or electric shock.
!
If the product generates abnormal sounds, a burning smell or smoke, 
disconnect the power cord immediately and contact Samsung Customer 
Service Center.
 •An electric shock or fire may result.
Do not let children hang from the product or climb on top of it.
 •Children may become injured or seriously harmed.
If the product is dropped or the outer case is damaged, turn off the power 
switch and disconnect the power cord. Then contact Samsung Customer 
Service Center.
 •
Continued use can result in a fire or electric shock.
Do not leave heavy objects or items that children like (toys, sweets, etc.) on 
top of the product.
 •The product or heavy objects may fall as children try to reach for the 
toys or sweets resulting in a serious injury.
!
During a lightning or thunderstorm, power off the product and remove the 
power cable.
 •A fire or electric shock may result.
!
Do not drop objects on the product or apply impact.
 •A fire or electric shock may result.
Do not move the product by pulling the power cord or any cable.
 •Product failure, an electric shock or fire may result from a damaged 
cable.
!GAS
If a gas leakage is found, do not touch the product or power plug. Also, 
ventilate the area immediately.
 •Sparks can cause an explosion or fire.
Do not lift or move the product by pulling the power cord or any cable.
 •Product failure, an electric shock or fire may result from a damaged 
cable.      
						

							12
!
Do not use or keep combustible spray or an inflammable substance near 
the product.
 •An explosion or fire may result.
Ensure the vents are not blocked by tablecloths or curtains.
 •An increased internal temperature may cause a fire.
100Do not insert metallic objects (chopsticks, coins, hairpins, etc) or objects 
that burn easily (paper, matches, etc) into the product (via the vent or input/
output ports, etc).
 •
Be sure to power off the product and disconnect the power cord 
when water or other foreign substances have entered the product. 
Then contact Samsung Customer Service Center.
 •Product failure, an electric shock or fire may result.
Do not place objects containing liquid (vases, pots, bottles, etc) or metallic 
objects on top of the product.
 •Be sure to power off the product and disconnect the power cord 
when water or other foreign substances have entered the product. 
Then contact Samsung Customer Service Center.
 •Product failure, an electric shock or fire may result.
Caution
!
Leaving the screen fixed on a stationary image for an extended period of 
time may cause afterimage burn-in or defective pixels.
 •Activate power-saving mode or a moving-picture screen saver if you 
will not be using the product for an extended period of time.
-_-
!
Disconnect the power cord from the power socket if you do not plan on 
using the product for an extended period of time (vacation, etc).
 •Dust accumulation combined with heat can cause a fire, electric shock 
or electric leakage.
!
Use the product at the recommended resolution and frequency.
 •Your eyesight may deteriorate.
Do not hold the product upside-down or move it by holding the stand.
 •The product may fall and become damaged or cause an injury.
!
Looking at the screen too close for an extended period of time can 
deteriorate your eyesight.
Do not use humidifiers or stoves around the product.
 •
A fire or electric shock may result.   
						

							13
!
Rest your eyes for more than 5 minutes for every 1 hour of product use.
 •Eye fatigue will be relieved.
Do not touch the screen when the product has been turned on for an 
extended period of time as it will become hot.
!
Store small accessories out of the reach of children.
!
Exercise caution when adjusting the product angle or stand height.
 •Your hand or finger may get stuck and injured.
 •Tilting the product at an excessive angle may cause the product to fall 
and an injury may result.
Do not place heavy objects on the product.
 •Product failure or personal injury may result.
When using headphones or earphones, do not turn the volume too high.
 •Having the sound too loud may damage your hearing.
Be careful that children do not place the battery in their mouths when 
removed from the remote control. Place the battery in a location that 
children or infants cannot reach.
 •
If children have had the battery in their mouths, consult your doctor 
immediately.
When replacing the battery, insert it with the right polarity (+, -).
 •Otherwise, the battery may become damaged or it may cause fire, 
personal injury or damage due to leakage of the internal liquid.
!
Use only the specified standardized batteries, and do not use a new battery 
and a used battery at the same time.
 •
Otherwise, the batteries may be damaged or cause fire, personal injury 
or damage due to a leakage of the internal liquid.
!
The batteries (and rechargeable batteries) are not ordinary refuse and must 
be returned for recycling purposes. The customer is responsible for returning 
the used or rechargeable batteries for recycling.
 •The customer can return used or rechargeable batteries to a nearby 
public recycling Center or to a store selling the same type of the 
battery or rechargeable battery.  
						

							14
Precautions when handling the panel
Do not stand the product as shown in the image. The panel is fragile and 
can get damaged.
!
Lay the product down to handle it as shown in the image. (the packaging 
can be used).
!
Ensure you use the handles on the back when moving the product.
15 mmDo not hold or grasp any area of the product within 15 mm from the front.    
						

							15
 -Contact the vendor where you 
purchased the product if any 
components are missing.
 - The pictures may look different from the 
actual components.
 -A stand is not provided with the product. 
To install a stand, you can purchase one 
separately.
Checking the Components
Components
 ―
Components may differ in different locations.
Quick Setup GuideWarranty card
(Not available in some locations) Regulatory guide
Power cord




Batteries
(Not available in some locations) Remote Control
DP cableHolder-Ring (4EA) / Screw (4EA)
Preparations
Chapter  02    
						

							16
Parts
External sensor KIT
POWER
 ―The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a 
wall, you can move the External sensor KIT to the side of the display.
 ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve 
quality.
Buttons Description
Remote Control SensorAim the remote control towards this spot on the LCD Display.
 ―
Keep the area between the remote sensor and remote control obstacle-free.
Light sensorAutomatically detects the intensity of ambient light around a selected display and 
adjusts the screen brightness.
Power indicatorThe power indicator will turn off when the product is turned on. It will blink in power-
saving mode.
POWER buttonUse this button for turning the LCD Display on and off.
SOURCE buttonSwitches from PC mode to Video mode.
Selects the input source that an external device is connected to.
Use the remote control within 7 m to 10 m from the sensor on the product at an angle of 30
 from the left and right.
 ― Store used batteries out of reach of children and recycle.
 ―Do not use a new and used battery together. Replace both batteries at the same time.
 ―Remove batteries when the remote control is not to be used for an extended period of time.    
						

							17
Reverse Side
 ―The color and shape of parts may differ from what is shown. Specifications are 
subject to change without notice to improve quality.
IR
 OUT
CONTROL IN
DP IN
HDMI IN 1
HDMI IN 2
DVI IN
(MAGIC INFO)
AV / COMPONENT
AUDIO
OUT
IN
RS232C OUTRS232C OUTRS232C OUTRS232C OUTRS232C IN
RS232C OUT
RGB IN
RJ45USB
DP OUT
(LOOPOUT)
Port Description
RS232C INConnects to MDC using an RS232C cable.
RS232C OUT
IR OUT
Receives the remote control signal via the external sensor board and outputs the 
signal via LOOP OUT.
CONTROL INSupplies power to the external sensor board or receives the light sensor signal.
DP INConnects to a PC using a DP cable.
HDMI IN 1, HDMI IN 2Connects to a source device using an HDMI cable.
DP OUT (LOOPOUT)Connects to another product using a DP cable.
DVI IN(MAGIC INFO)DVI IN: Connects to a source device using a DVI cable or HDMI-DVI cable.
MAGIC INFO: Use the (dedicated) DP-DVI cable when connecting a network box 
(sold separately).
RGB INConnects to a source device using a D-SUB cable.
AV / COMPONENTConnects to a source device using the AV/Component adapter.
AUDIO OUTConnects to the audio of a source device.
AUDIO INReceives sound from a PC via an audio cable.
RJ45Connects to MDC using a LAN cable.
USB Connect to a USB memory device.     
						

							18
 -Remote control button functions may 
differ for different products.
Remote Control
 ―
Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.
 ―A button without a description in the image below is not supported on the product.
HOMEMENU
POWER
OFF
VOL
 MagicInfoPlayer I
.QZ
1
ABC
2
DEF
3
GHI
4
JKL
5
MNO
6
SYMBOL
0
PRS
7
TUV
8
WXY
9
MUTE
SOURCE
Power off the product.
Number buttons
Enter the password in the OSD menu.
Mute the sound.
Unmuting the sound: Press MUTE again or press 
the volume control(+ VOL -) button.
Go to Home Launch Button.
Display or hide the onscreen display menu, or 
return to the previous menu.Power on the product.
Adjust the volume.
Change the input source. Use this hotkey to directly access MagicInfo. 
This hotkey is available when a network box is 
connected.  
CH  
DEL-/-- 
CH LIST  
						

							19
TOOLSINFO
SETUNSETLOCK
PC
A
DVI
B
HDMI
C
DP
D
EXITRETURN
IR control
Display information about the current input 
source.
Move to the upper, lower, left or right menu, or 
adjust an option's setting.
Confirm a menu selection.
Exit the current menu.
Manually select a connected input source from 
PC, DVI , HDMI1, HDMI2 or DisplayPort.
Used in Anynet+ mode and multimedia mode.
Quickly select frequently used functions.
Return to the previous menu.It sets safe lock function.
If multiple products are connected through the  Video Wall feature, press the SET button and 
enter a product ID using the number buttons.
Control the product using the remote control.
Cancel a value that has been set using the  
SET button and control all connected products  using the remote control.
 -Remote control button functions may 
differ for different products.
To place batteries in the remote control       
						

							20
Connection Using an IR Stereo Cable (sold 
separately)
Make sure to connect the External ambient sensor while the product is powered 
off. Then, power on the product.
Controlling more than one display product using 
your remote control
 •Connect the IR OUT port on the product to the CONTROL IN port on the 
other display product using the dedicated stereo cable.
 •A command sent from the remote control pointed at product 1 will be 
received by both display products 
1 and 2.
 ― The appearance may differ depending on the product.
1 2
IR OUT
CONTROL IN
Controlling more than one display product using an 
External ambient sensor
 •A command sent from the remote control pointed at product 1 (to which 
the External ambient sensor is connected) will be received by both display 
products 
1 and 2.
 ― The appearance may differ depending on the product.IR OUT
CONTROL IN
POWER
SOURCE
1 2
CONTROL IN