Samsung Ud55ep Manual

							121
Time
MENU m → System  → Time → ENTER E
Time
Clock Set
DST
Sleep Timer
Power On Delay Off
Off
0 sec
 - The displayed image may differ depending on the model.
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time 
using the Timer function.
 ―
Press the INFO button if you want to view the current time.
Clock  Set
Select Clock Set. Select Date  or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow buttons. Use the left and right arrow buttons to 
move from one entry field to the next. Press E  when done.
 ―
You can set the Date  and Time directly by pressing the number buttons on the remote control.
DST
Switches the DST (Daylight Saving Time) function on or off.
Off / On
 •
Start Date: Set the start date of Daylight Saving Time.
 •
End Date: Set the end date of Daylight Saving Time.
 •Time Offset: Select the correct time offset your timezone.
Sleep  Timer
Automatically shuts off the product after a preset period of time.
(Off / 30 min. / 60 min. / 90 min. / 120 min. / 150 min. / 180 min.)
 ―
Use the up and down arrows to select a period of time, and then press  E. To cancel Sleep Timer, select Off.
Power  O n D elay
When connecting multiple products, adjust the power-on time for each product to prevent power overload (within the range 
0–50 seconds).  
						

							122
Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will 
automatically search the different video input sources for active video.
A uto  S ource  S witching
When the Auto Source Switching is On , the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is available.
If both the primary and secondary input sources are not recognized, the display will perform two searches for an active source, 
each search checking the primary and then secondary source. If both searches fail, the display will return to the first video 
source and display a message indicating that there is no signal.
When the Primary Source selection is set to All , the display will search all the video source inputs twice in sequence looking 
for an active video source, returning back to the first video source in the sequence if no video is found.
P rimary  Source  R ecovery
Select whether to restore the selected primary input source when a primary input source is connected.
 ―
The Primary Source Recovery function is disabled if Primary Source is set to All .
Primary  Source
Specify Primary Source for the automatic input source.
Secondary  Source
Specify Secondary Source for the automatic input source.
 ―
The Primary Source Recovery function is disabled if Primary Source is set to All .
Auto  S ource  S witching
MENU m → System  → Auto Source Switching → ENTER E
끄기
Auto Source Switching
Auto Source Switching
Primary Source Recovery
Primary Source
Secondary Source Off
Off
All
DVI
 - The displayed image may differ depending on the model.  
						

							123
Power  C ontrol
MENU m → System  → Power Control → ENTER E
Power Control
Auto Power On
PC Module Power
Max. Power Saving
Standby Control
Power Button
Network Standby
Off
On
Auto
Power On Only Off
 -The displayed image may differ depending on the model.
Auto  P ower  O n
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
 •
Off / On
PC Module  Power
The PC module can be turned on/off separately from the LFD.
Synced P ower-O n
To turn on the PC module without turning on the LFD, select Off.
 •
Off / On
Synced P ower-O ff
To turn off the LFD without turning off the PC module, select Off.
 •
Off / On
Max.  Power  S aving
Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time.
 •
Off / On
 ―
Available only PC, DVI , HDMI1, HDMI2, DisplayPort mode.  
						

							124
Standby  Control
You can set the screen standby mode to be applied when an input signal is received.
 •
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
 •Off
The message No Signal will appear if no input signals are detected.
 ―
The Standby Control option is only enabled when Source  is set to PC, DVI, HDMI1, HDMI2 or DisplayPort.
 ―
If No Signal is displayed although a source device is connected, check the cable connection.
 ―If No Signal Message is set to Off, the No Signal message does not appear.
If this is the case, set No Signal Message to On .
 •
On
Power-saving mode will activate if no input signals are detected.
Power  B utton
The power button can be set to either turn on the power or turn on/off the power.
 •
Power On Only: Set the power button to turn on the power.
 •
Power On/Off: Set the power button to turn on/off the power.
Network  Standby
This feature keeps the network power on when the product turns off.
 •
Off / On
Power Control
Auto Power On
PC Module Power
Max. Power Saving
Standby Control
Power Button
Network Standby
Off
On
Auto
Power On Only Off
 -The displayed image may differ depending on the model.  
						

							125
Eco  S olution
MENU m → System  → Eco Solution → ENTER E
Eco Solution
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power Off 
Auto Power Off
Off
Off
Off
Off
4 hours
 - The displayed image may differ depending on the model.
Energy  Saving
Reduce the power consumption by adjusting the screen brightness.
 •
Off / Low  / Medium / High
Eco  S ensor
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
 •
Off / On
 ―
Adjusting the High setting under Picture while Eco Sensor is on will disable the Off.
Min. B acklight
When Eco Sensor is On , you can manually adjust the minimum screen brightness. Min. Backlight is the darkest backlight 
mode. Make sure the Min. Backlight setting is lower than the Backlight setting.
 ― If Eco Sensor is On , the display brightness may change (become slightly darker or brighter) depending on the surrounding 
light intensity. 
S creen  Lamp  Schedule
Adjust the panel brightness. A value closer to 100 makes the panel brighter.
 •
Off / On  
						

							126
Eco Solution
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power Off 
Auto Power Off
Off
Off
Off
Off
4 hours
 - The displayed image may differ depending on the model.
No S ignal  Power  O ff 
Save power by turning the device off when no signal is received from any source.
 •
Off / 15 min. / 30 min. / 60 min.
 ―
Disabled when an attached PC is in power saving mode.
 ―The product will automatically power off at a specified time. The time can be changed as required.
Auto  P ower  O ff
The product will automatically turn off if you don’t press a button on the remote or touch a button on product front panel 
within select hours to prevent overheating.
 •
Off / 4 hours / 6 hours / 8 hours
This function detects the internal temperature of the product. You can specify the temperature range that is acceptable.
The default temperature is set to 77
C.
The recommended operating temperature for this product is 75 to 80C (based on an ambient temperature of 40C).
 ― The screen will become darker if the current temperature exceeds the specified temperature limit. If the temperature 
continues to rise, the product will power off to prevent overheating.
T emperature  Control
MENU m → System  → Temperature Control → ENTER E
System
Temperature Control 77
 -
The displayed image may differ depending on the model.  
						

							127
Device  Manager
MENU m → System  → Device Manager → ENTER E
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
 -
The displayed image may differ depending on the model.
Configure options for external input devices connected to the product.
Keyboard  Settings
Connecting a keyboard to the product displays the Keyboard Settings menu.
S elect K eyboard
Select a keyboard you want to use from the available connected keyboards.
 ―
It is possible to use only one connected keyboard.
Keyboard O ptions
 ―
Depending on the country.
Keyboard  Language
Specify the keyboard input language.
K eyboard  Type
Specify the keyboard type.
S witch  Input  Language
Configure the key combination used to change the input language.  
						

							128
Mouse Settings
Connecting a mouse to the product displays the Mouse Settings menu.
S elect M ouse
Configure mouse connection settings or options for connected mouse devices.
 ―
Among connected mouse devices, only one mouse can be used.
Mouse O ptions
 ―
Depending on the country.
Primary  Button
Select a button on the mouse that will perform basic functions (click and enter).
 •
Left (default) / Right
Pointer  Speed
Set the mouse pointer speed.
 •
Slow  / Standard / Fast
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
 -
The displayed image may differ depending on the model.  
						

							129
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
 -The displayed image may differ depending on the model.
Pointer  Settings
Specify the pointer size, speed and shape.
P ointer Size
Specify the pointer size.
 •
Small / Medium / Large / Extra large
Pointer Speed
Specify the pointer speed. A higher speed increases the pointer sensitivity.
 •
Slow  / Standard / Fast
Pointer I mage
Specify the pointer shape.
 •
Image 1 ~ Image 10  
						

							130
Play  via
MENU m → System  → Play via → ENTER E
System
Play via MagicInfo
 -
The displayed image may differ depending on the model.
Select the appropriate Play via mode depending on the environment where you are using the product.
The home screen may be different depending on the setting.
 • MagicInfo / URL Launcher
Change  PIN
MENU m → System  → Change PIN → ENTER E
System
Change PIN
 -
The displayed image may differ depending on the model.
The Change PIN screen will appear.
Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN.
When the Confirm screen disappears, press the Close button. The product has memorized your new PIN.
 ―
Default password: 0 - 0 - 0 - 0