Samsung Ud46d-p Manual

To use this function, your mobile device 
should be supported by the Wi-Fi Direct.
Wi-Fi Direct
MENUm → Network → Wi-Fi Direct → ENTERE
Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a router.
To connect your mobile device with your product using Wi-Fi Direct, follow these steps:
1 Go to Wi-Fi Direct screen. The product starts to search devices.
2 Turn on the Wi-Fi Direct function on your device....

Server Network Settings
MENUm → Network → Server Network Settings → ENTERE
Connect to server
To run Player connect to a network.
 •If the SSL option is enabled, the server is configured to use https and data transfer is encrypted.
 ―
Enter the server IP address and port number. Use 7001 as the port number. (If unable to connect to 
the server using port number 7001, check with your server administrator to find the correct port 
number and then change the port number.)
MagicInfo Mode
Select the...

System
Setup
MENU m → System → Setup → ENTER E
System
Setup
Time
Auto Source Switching
Power Control
Eco Solution
Temperature Control
Device Manager77
 -
The displayed image may differ depending on the model.
Initial settings (System)
After powering on the product for the first time, configure basic settings such as the language, channel and time.  
Press the 
 button.
 ― Enter your 4 digit PIN number. The default PIN number is “0-0-0-0". 
If you want to change the PIN number, use the Change PIN...

Time
MENU m → System → Time → ENTER E
Time
Clock Set
DST
Sleep Timer
Power On DelayOff
Off
0 sec
 - The displayed image may differ depending on the model.
You can configure Clock Set or Sleep Timer. You can also set the product to automatically turn on or off at a specified time 
using the Timer function.
 ―
Press the INFO button if you want to view the current time.
Clock Set
Select Clock Set. Select Date  or Time, and then press E.
Use the number buttons to enter numbers or press the up and down arrow...

Turning on the display with Auto Source Switching On, and the previous video source selection is not active, the display will 
automatically search the different video input sources for active video.
Auto Source Switching
When the Auto Source Switching is On , the display video source will automatically be searched for active video.
The Primary Source selection will be activated, if the current video source is not recognized.
Secondary Source selection will become active, if no primary video source is...

Power Control
MENU m → System → Power Control → ENTER E
Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Power Button
Network Standby
OffOn
Auto
Power on only Off
 -The displayed image may differ depending on the model.
Auto Power On
This feature automatically turns on the product as soon as it is plugged in. Pressing the power button is not needed.
 • Off / On
PC module power
The PC module can be turned on/off separately from the LFD.
Synced power-on
To turn on the PC module...

Standby Control
You can set the screen standby mode to be applied when an input signal is received.
 •Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to the display.
The message No Signal will appear if no source device is connected.
 •Off
The message No Signal will appear if no input signals are detected.
 ―
The Standby Control option is only enabled when Source  is set to PC, DVI, HDMI1, HDMI2 or DisplayPort.
 ―
If No Signal is displayed...

Eco Solution
MENU m → System → Eco Solution → ENTER E
Eco Solution
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
Off
Off
Off
Off
Off
 -The displayed image may differ depending on the model.
Energy Saving
Reduce the power consumption by adjusting the screen brightness.
 • Off / Low  / Medium / High
Eco Sensor
To enhance your power savings, the picture settings will automatically adapt to the light in the room.
 •
Off / On
 ―
Adjusting the High setting under Picture while...

Eco Solution
Energy Saving
Eco Sensor
Screen Lamp Schedule
No Signal Power Off
Auto Power Off
Off
Off
Off
Off
Off
 -The displayed image may differ depending on the model.
No Signal Power Off
Save power by turning the device off when no signal is received from any source.
 • Off / 15 min / 30 min / 60 min
 ―
Disabled when an attached PC is in power saving mode.
 ―The product will automatically power off at a specified time. The time can be changed as required.
Auto Power Off
The product will automatically...

Device Manager
MENU m → System → Device Manager → ENTER E
Device Manager
Keyboard Settings
Mouse Settings
Pointer Settings
 -The displayed image may differ depending on the model.
Configure options for external input devices connected to the product.
Keyboard Settings
Connecting a keyboard to the product displays the Keyboard Settings menu.
Select Keyboard
Select a keyboard you want to use from the available connected keyboards.
 ―
It is possible to use only one connected keyboard.
Keyboard Options...