Samsung Ud46d-p Manual

Remote control issue
The remote control does not work.Make sure that the batteries are correctly in place (+/-).
Check if the batteries are flat.
Check for power failure.
Make sure that the power cord is connected.
Check for any special lighting or neon signs switched on in the vicinity.
Source device issue
A beeping sound is heard when my PC is booting.If a beeping sound is heard when your PC is booting, have your PC serviced.
Other issue
The product smells like plastic.The plastic smell is normal and...

Other issue
There is no sound from the speakers in HDMI mode when a 
DVI-HDMI cable is connected.DVI cables do not transmit sound data.
Make sure to connect the audio cable to the correct input jack to enable audio.
HDMI Black Level is not functioning properly on an HDMI 
device with YCbCr output.This function is available only when a source device, such as a DVD player and STB, is connected to the 
product via an HDMI (RGB signal) cable.
There is no sound in HDMI mode.Displayed picture colours may not...

Other issue
The IR sensor is not functioning.Make sure the sensor light turns on when a button is pressed on the remote control.
 •If the sensor light does not turn on, turn the power switch off and then on again on the back of 
the product.
( The power LED lights up red when the screen is switched off.)
If the sensor light still does not turn on after the power switch is turned off and then on again, an 
internal jack may be disconnected.
Contact your nearest service centre to have the product...

Q & A
QuestionAnswer
How can I change the frequency?Set the frequency on your graphics card.
 •
Windows XP: Go to Control Panel → Appearance and Themes  → Display → Settings → 
Advanced → Monitor and adjust the frequency in Monitor Settings.
 • Windows ME/2000: Go to Control Panel → Display → Settings → Advanced → Monitor and 
adjust the frequency in Monitor Settings.
 •Windows Vista: Go to Control Panel → Appearance and Personalization → Personalize → 
Display Settings → Advanced Settings → Monitor and...

QuestionAnswer
How do I set powersaving mode? •
Windows XP: Set power-saving mode in Control Panel → Appearance and Themes  → Display 
→  Screen Saver Settings or BIOS SETUP on the PC.
 •
Windows ME/2000: Set power-saving mode in Control Panel → Display → Screen Saver 
Settings or BIOS SETUP on the PC.
 •
Windows Vista: Set power-saving mode in Control Panel → Appearance and Personalization 
→ Personalize 
→ Screen Saver Settings or BIOS SETUP on the PC.
 •
Windows 7: Set power-saving mode in Control...

Specifications
 -Size
 -Display area
H
V
 -Dimensions ( W x H x D)
W
D
H
General
Model Name UD46D-P
PanelSize46 CLASS (46.0 inches / 116 cm)
Display area1018.08 mm (H) x 572.67 mm ( V ) 
40.1 inches (H) x 22.5 inches ( V )
Dimensions (W x H x D)1022.1 x 576.7 x 97.0 mm
40.2 x 22.7 x 3.8 inches
Weight18.0 kg / 39.7 Ibs
Power SupplyAC 100 to 240 VAC (+/- 10%), 60 / 50Hz ± 3Hz 
Refer to the label at the back of the product as the standard voltage can vary in different countries.
Environmental...

 ―Plug-and-Play
This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor 
settings.
Monitor installation takes place automatically. However, you can customize the installation settings if desired.
 ― Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may appear brighter or darker on the panel. This does not affect 
product performance.
 ― This device is a...

PowerSaver
The power-saving function of this product reduces power consumption by switching off the screen and changing the colour of the power LED if the product is not used 
for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse. Power-
savign mode only functions when the product is connected to a PC with a power-saving function.
PowerSaverNormal Operation Power saving mode
(SOG Signal : Not Support...

Preset Timing Modes
 ―This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than 
the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product.
 ― Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product. If the LCD product does not support 85Hz, change the vertical...

ResolutionHorizontal Frequency
(kHz) Vertical Frequency
(Hz)Pixel Clock
(MHz)Sync Polarity
(H/V)
VESA, 640 x 480
37.500  75.000 31.500 -/-
VESA, 800 x 600 35.156  56.250 36.000 +/+
VESA, 800 x 600 37.879  60.317 40.000 +/+
VESA, 800 x 600 48.077  72.188 50.000 +/+
VESA, 800 x 600 46.875  75.000 49.500 +/+
VESA, 1024 x 768 48.363  60.004 65.000 -/-
VESA, 1024 x 768 56.476  70.069 75.000 -/-
VESA, 1024 x 768 60.023  75.029 78.750 +/+
VESA, 1152 x 864 67.500  75.000 108.000 +/+
VESA, 1280 x 720 45.000...