Samsung Ud46d-p Manual

Sound Effect
MENUm → Sound → Sound Effect → ENTERE
Sound Effect
Virtual Surround
Dialog Clarity
EqualiserOff
Off
 -
The displayed image may differ depending on the model.
Configure your preferred sound effect for output sound.
 ―
If Speaker Settings is set to External, Sound Effect is disabled.
 ―Available only when Sound Mode is set to Standard.
Virtual Surround
This function provides a virtual 5.1 channel surround sound experience through a pair of speakers using HRTF(Head Related 
Transfer Function)...

HDMI Sound
MENU m → Sound → HDMI Sound → ENTER E
Sound
HDMI SoundAV(HDMI)
 -
The displayed image may differ depending on the model.
Select whether to hear from AV(HDMI) or PC(DVI).
 • AV(HDMI) / PC(DVI)
Sound on Video Call
MENU m → Sound → Sound on Video Call → ENTER E
Sound
Sound on Video Call Current Source
 -The displayed image may differ depending on the model.
Select sound output to listen to during a video call.
 • Current Source / Video Call  

Speaker Settings
MENU m → Sound → Speaker Settings → ENTER E
Sound
Speaker Settings
 -The displayed image may differ depending on the model.
TV Sound Output
 •
External / Receiver
 ―
If there is no video signal, both the products speakers and the external speakers will be mute.
Auto Volume
MENU m → Sound → Auto Volume → ENTER E
Sound
Auto Volume Off
 -
The displayed image may differ depending on the model.
The volume can vary depending on the channel.
Automatically equalize the volume level when...

Reset Sound
MENU m → Sound → Reset Sound → ENTER E
Sound
Reset Sound
 -The displayed image may differ depending on the model.
The displayed image may differ depending on the model. Reset all sound settings to the factory defaults.   

Network
Network Status
MENUm → Network → Network Status → ENTERE
You can check the current network and Internet status.
Network Status
Your wireless network and Internet connection are setup and ready to use.You are connected to the Internet. If you have any problems using online services, please 
contact your Internet service provider.
Close
Retry
IP Settings
Disconnect
 -
The displayed image may differ depending on the model.
Network Settings
MENUm → Network → Network Settings → ENTERE
Configure...

Network Settings (Wired)
Connecting to a Wired Network
There are three ways to attach your product to your LAN using cable.
 •You can attach your product to your LAN by connecting the LAN port on the back of your product 
to an external modem using a LAN cable.
See the diagram below.
RJ45The Modem Port on the Wall External Modem
(ADSL / VDSL)
Modem Cable LAN CableLAN
 •
You can attach your product to your LAN by connecting the LAN port on the back of your product 
to an IP Sharer which is connected to an...

Set the network connection to use Internet services such as perform software upgrades.
Automatic Network Settings (Wired)
Connect to the network using a LAN cable.
Make sure a LAN cable is connected first.
How to set up automatically
1 Set Network Type to Wired from the Network Settings page.
2 Press the Connect button to start Network Settings.
 -The Connect button is only enabled when the LAN cable is properly connected.
3 The network test screen appears and verifies the network connection.
When the...

Network Setting (Wireless)
Connecting to a Wireless Network
This product does not support wireless networking. To use wireless networks, purchase a Samsung 
wireless LAN adapter ( WIS10ABGN, WIS12ABGNX). Connect the adapter to the product. Use the wireless 
Internet router to connect to the Internet.
The LAN Port on the WallWireless IP sharer
(router having DHCP server)
LAN CableProduct Panel
Samsung Wireles LAN Adapter
Samsung’s Wireless LAN adapter is sold separately and is offered by selected...

Automatic Network Setup (Wireless)
Most wireless networks have an optional security system that requires devices that access the network 
to transmit an encrypted security code called an Access or Connection Information. The Connection 
Information is based on a Pass Phrase, typically a word or a series of letters and numbers of a specified 
length you were asked to enter when you set up security for your wireless network. If you use this 
method of setting up the network connection, and have a...

How to set up manually
1 Set Network Type to Wireless from the Network Settings page.
2 The Network function searches for available wireless networks. When done, it displays a list of the 
available networks.
3 In the list of networks, press the u or d  button to select a network, and then press the  E button 
twice.
 ― If the desired wireless router does not appear, select Refresh to search again.
 ―If the router cannot be found after retrying, select the Stop  button.
The Add Network button appears....