Samsung Television SyncMaster 400PXn User Manual

1) Connect the power cord for your LCD Display to the power port on the back of the LCD Display.  Trun on the power switch.
2) There are 3 ways to connect the D-sub to your LCD Display.   Choose one of the following: 
2-1) Using the D-sub (Analog) connector on the video card.   Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the  15 pin D-sub 
Port  on the computer. 
2-2) Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the  DVI(HDCP) port on...

Connecting Digital DVD 
 
Note
• Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using the DVI cable. 
• Then, start the DVD with a DVD disc inserted. 
• Select Digital using the SOURCE button. 
Note
• The monitor has DVI IN connection terminals to connect DVI input devices digital DVD.   
 
Connecting to a VCR
 
1) AV input devices such as VCRs or Camcorders are connected via the  AV IN [VIDEO] or AV IN [S-VIDEO]  
of the LCD Display using an S-VHS or BNC cable.
2)...

1) Connect a set of audio cables between the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and 
the AUDIO OUT jacks on the DVD player.
2) Connect a Component cable between the  BNC/COMPONENT IN - P
R, Y, PB port on the LCD Display and 
the P
R, Y, PB jacks on the DVD player. 
3) Select  Component  for the connection to a DVD player using the SOURCE button on the front of the LCD 
Display or on the remote control.
4) Then, start the DVD Player with a DVD disc inserted. 
Note
• A component cable is...

 
(If not, check your local electronics store.)  
If your camcorder is stereo, you need to connect a set of two cables. 
   
 
Connecting to a DTV Set Top Box
 
Note
• The connections for a typical Set Top Box are shown below.
 
1) Connect a set of audio cables between the  COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and 
the AUDIO OUT jacks on the Set Top Box.
2) Connect a Component cable between the  BNC / COMPONENT IN - P
R, Y, PB port on the LCD Display and 
the P
R, Y, PB jacks on the Set Top...

the speaker connection jack on the back of the speaker.
Note
• Do not move the SET while the SET is connected to the speakers.   The speaker-bracket for connecting the SET speaker my become damaged.
   
 
Connecting to an Audio System
 
1) Connect a set of audio cables between the AUX L, R jacks on the  AUDIO SYSTEM and the AUDIO OUT 
[L-AUDIO-R]  on LCD Display.
 
 
Connecting a LAN Cable
 
1) Connect the LAN cable. 
 
 
Connecting a USB device
  

1) You can connect USB devices such as a mouse or keyboard. 
 
Using a USB Holder
 
  When using a small external device such as a portable memory stick and it is connected to the USB terminal 
at the back of your monitor, it is exposed to the possiblity of theft or loss. By installing a USB holder after the 
installation of an external device, you can prevent theft or loss.
  
 
  
 
  1) Insert part   of your USB holder into the groove in part   at the back of your monitor. 
  
  

 2) Align part   of your USB holder with the groove at the bottom of part   at the back of your monitor. 
Align part   of your USB holder with the bottom of part   at the back of your monitor. 
  
 
 3) Insert a screw into the groove aligned in step [2], and fasten it. 
 
Align   with   and use a screw to fix them.
© 1995~2007 SAMSUNG. ALL Right Reserved  

Select Language Main Page
Model
The color and appearance of the product may vary depending on the model, and the product specifications are 
subject to change without prior notice for reasons of performance enhancement. 
Connections 
Installing the Stand KIT
 
 
Note
• Only the supplied bolts should be used.
 
Caution
Samsung Electronics will not be responsible for damages caused by using a base other than those 
specified. 
 
Installing the Semi Stand 
 
Left stand Right stand 
Caution
Make sure to...

This stand is designed for adjusting the screen angle. The company is not responsible for any problem 
caused when using this stand. Under no circumstances use the product as a stand for placing something on. 
 
 
Installing the Stand KIT (sold separately) 
 
1) A Cover-Protector is used to protect the hole at the bottom of the LCD Display , where the stand is  inserted. Be sure to remove the Cover-Protector when attaching the provided Semi Stand or Stand KIT 
(sold separately) and cover the hole using...

1) Connect the power cord for your LCD Display to the power port on the back of the LCD Display.  Trun on the power switch.
2) There are 3 ways to connect the D-sub to your LCD Display.   Choose one of the following: 
2-1) Using the D-sub (Analog) connector on the video card.   Connect the D-sub to the 15-pin, RGB port on the back of your LCD Display and the  15 pin D-sub 
Port  on the computer. 
2-2) Using the DVI (Digital) connector on the video card. 
Connect the DVI Cable to the  DVI(HDCP) port on...