Samsung Television SyncMaster 400PXn User Manual

   Adjusts the audio volume. 
4) ENTER
  Activates a highlighted menu item. 
5) SOURCE 
 
Switches from PC mode to Video mode.  
Changing the source is only allowed for external devices that are connected to the LCD Display at the time. 
[PC] 
→
 [BNC]  →
 [DVI]  →
 [AV]  →
 [S-Video]  →
 [Component]  
>> Click here to see an animation clip. 
6) PIP
  Push the PIP button to turn the PIP screen On / Off. 
More than one PIP cannot overlap on screen as BNC and the component use the same terminal.  
>> Click...

 
1) POWER S/W ON [ | ] / OFF [O]
  Switches the LCD Display On/Off.
2) POWER IN 
 The power cord plugs into the LCD Display and 
the wall plug.
 
3) RS232C OUT/IN (RS232C Serial PORT)
 
MDC(Multiple Display Control) Program Port 
4) DVI / PC IN [DVI(HDCP)] (PC Video  Connection Terminal)
 
Using a DVI Cable (DVI-D to DVI-D) - DVI 
mode (Digital PC)
5) DVI / PC IN [RGB] (PC Video  Connection Terminal)
 
Using a D-Sub Cable (15 pin D-Sub) - PC 
mode (Analog PC)
6) DVI / PC IN [PC/DVI/BNC AUDIO IN]...

Audio Connection Terminal (Input)) 
11) AV OUT [VIDEO] (VIDEO Connection  Terminal): AV mode (Output)
12) AV IN [VIDEO] (VIDEO Connection  Terminal) (Input) 
13) AV OUT [S-VIDEO] (S-VIDEO Connection  Terminal): S-VIDEO mode (Output)
14) AV IN [S-VIDEO] (S-VIDEO Connection  Terminal) (Input)
15) EXT SPEAKER(8  Ω)[- - L - +, - - R - +] (EXT 
Speaker Connection Terminal)
16) AUDIO OUT [L-AUDIO-R] (LCD Display  Audio Connection Terminal (Output))
  AUDIO OUT is the terminal for sound output of 
PC, DVI or...

24. SRS25. DUAL/MTS 26. PIP27. SOURCE 28. SWAP
29.  SIZE
30. REW31. STOP 32. PLAY/PAUSE 33. FF 
 
 
1) ON / OFF
  Turns the LCD Display On/Off.
2) MAGICNET
  MagicNet Quick Launch Button. 
- This fuction does not work for this monitor. 
3) MDC 
  MDC Quick Launch Button. 
4) LOCK 
 Activates or deactivates all function keys on both the remote control and the LCD Display except for the 
Power and LOCK buttons.
5) MagicNet buttons
 Used for MagicNet. 
- This fuction does not work for this monitor. •...

 TV channels provide text information services via teletext. 
- This fuction does not work for this monitor. 
10)
 MENU 
  Opens the on-screen menu and exits from the menu screen or closes the screen adjustment menu.
11)  ENTER 
  Activates a highlighted menu item.
12) P.MODE 
 When you press this button, current picture mode is displayed on the lower center of the screen.  
 
AV / S-Video / Component : P.MODE 
 
The Monitor has four automatic picture settings that are preset at the factory.  
Then push...

  
- This fuction does not work for this monitor. STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated 
depending on the broadcasting type by using the DUAL button on the remote control while watching TV.
MTS-
You can select MTS (Multichannel Television Stereo) mode. 
 Audio TypeMTS/S_ModeDefault
FM Stereo
MonoMonoManual ChangeStereoMono 
↔
 Stereo
SAPMono  ↔
 SAPMono
26)  
PIP  
  Every time you press the button, a PIP screen appears.
27)  
SOURCE
  Changes the source of the...

 Mechanical Lay-out
 | Monitor Head  | Stand  | Speaker  | Installation VESA Bracket  | Wall Bracket Installation  
1. Mechanical Lay-out
2. Monitor Head
Dodatak 

3. Stand
4. Speaker
5. Installation VESA Bracket 
zWhen installing VESA, make sure to comply with the international VESA standards.  zPurchasing VESA Bracket and Installation Information : Please contact your nearest Samsung Distributor to place 
an order. After your order is placed, installation  professionals will visit you and install the bracket.  
zAt least 2 persons are needed in order to move the LCD Monitor.  zSamsung is not responsible for any product damage or any injury caused by installation...

For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length.
6. Wall Bracket Installation 
zContact a technician for installing the wall bracket.  zSamsung Electronics is not responsible for any damages to the product or harm to customers when the 
installation is done by the customer.  
zThis product is for installing on cement walls. The product may not stay in place when installed on plaster or wood. 
 
Components
Only use the components and accessories shipped...

There are two hinges(left and right). Use the correct one.
Before drilling into the wall, check if the length 
between the two locking holes at the back of the 
product is correct. 
If the length is too short or long, loosen all or 
some of the 4screws on the wall bracket to adjust 
the length. 
 
A. Length between the two locking holes
Check the installation diagram and mark the drill 
points on the wall. Use the 5.0 mm bit to drill 
holes deeper than 35 mm. Fix each anchor in the 
corresponding hole....