Samsung Television ES7100 User Manual
Have a look at the manual Samsung Television ES7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
and the Added Ch. list. / On the Program View screen, displays the programs for the next or previous channel. ●E Wa t c h / Information Displays the channel you selected. / Displays details of the selected channel. ●k Page Scrolls the Channel List to the next or previous page. NThese correspond to the channel buttons on your remote.
Display Icons Used in the Channel List screens : An analog channel. : A reserved program. : A locked channel. Using Schedule Viewing in Channel List (digital channels only) You can use Schedule Viewing in Channel List to schedule a digital channel program for viewing. The TV will turn on and display the digital
channel program when the program
begins.1.
Press the CH LIST button. The
Channel List screen appears.
2.
Select a desired digital channel.
3.
Select
{ using your remote. The
TV displays the program list of the
selected channel.
4.
Select a desired program in the
program list, and then select
Information using your remote.
5. On the Information screen, select Schedule Viewing. The selected program is scheduled. NIf you want to cancel the Schedule Viewing, follow Steps 1 through 4, and then select Cancel Schedule.
Memorizing ChannelsAntenna Menu → Channel → Antenna Before your television can memorize the available channels, you must select your TV's signal source, Air (using an antenna) or Cable. After you have selected the signal source, go on to the Auto Program function. NSelecting the signal source using the Antenna function also determines
the signal source the TV is tuned to. For example, if you receive your TV signal over the air, and you select Cable, you will see only snow. You must select Air to see a picture. Auto Program Menu → Channel → Auto Program The Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel list.
To start the Auto Program, follow these steps:1. Go to the Auto Program menu. 2. Select Air or Cable or both, and then select Next. A c mark appears in the check box. NIf you selected Air or Cable in the Antenna menu, your choice will already be selected. 3. If you selected Cable, the cable system screen appears. Select Digital
Cable System. NIf you selected Air only, the Auto Program starts. 4. Select the correct cable signal format - STD, HRC or IRC. NMost cable systems use STD (Standard). 5. Repeat for Analog Cable System . 6. Select Next. The Auto Program starts. NAfter all the available channels are
stored, the Auto Program removes scrambled channels. When done, the Auto Program menu then reappears. This process can take up to 30 minutes.
Other FeaturesClear Scrambled Channel Menu → Channel → Clear Scrambled Channel This function filters out scrambled channels after the Auto Program is completed. This process may take up to 30 minutes. NThis function is only available in Cable mode. How to Stop the Clear Scrambled Channel