Samsung Television ES7100 User Manual
Have a look at the manual Samsung Television ES7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Most home networks use a Dynamic IP address. NSome networks require a Static IP address. If your network requires a Static IP address, you must enter the IP address, subnet mask, gateway, and DNS values manually when you set up the network connection. To get the IP address, subnet mask, gateway, and DNS values, contact your Internet Service Provider (ISP). If
you have a Windows computer, you can also get these values through your computer. NYou can use ADSL modems that support DHCP if your network requires a Static IP address. ADSL modems that support DHCP also let you use Static IP addresses. The Wireless Network Connection NFor an illustration of the wireless network connection, see your paper
user's manual. You can connect your TV to your LAN through a standard wireless router or modem. This TV supports the IEEE 802.11a/b/g and n communication protocols. Samsung recommends using IEEE 802.11n. When you play video over a network connection using IEEE 802.11 a/b or g, the video may not play smoothly.
NTo use a wireless network, your TV must be connected to a wireless router or modem. If the wireless router or modem supports DHCP, your TV can use a DHCP or static IP address to connect to the wireless network. NSelect a channel on the wireless router or modem that is not currently being used. If the channel set for the router or modem is currently
being used by another device nearby, this will result in interference and communication failure. NYour TV supports only the following wireless network security protocols: – Authentication Mode : WEP, WPAPSK, WPA2PSK – Encryption Type : WEP, TKIP, AES NIf you select the Pure High- throughput (Greenfield) 802.11n mode and the Encryption type is set
to WEP or TKIP on your AP (access point) or wireless router, Samsung TVs will not support a connection in compliance with new Wi-Fi certification specifications. NIf your wireless router or modem supports WPS (Wi-Fi Protected Setup), you can connect to the network via PBC (Push Button Configuration) or a PIN (Personal Identification Number). WPS will
automatically configure the SSID and WPA key in either mode. NIf your router, modem, or device is not certified, it may not connect to the TV. NConnection Methods: You can set up the wireless network connection in four ways: – Using Auto Setup (with the Auto Network Search function) – Using Manual Setup
Setting up a Wired NetworkNetwork Settings Menu → Network → Network Settings Set up the wired network connection so you can use various Internet services such as Smart Hub and AllShare Play and perform software upgrades. Automatic Wired Network Setup You can configure your TV's wired network connection automatically when connecting your TV to a network that
supports DHCP. NIf you have connected a LAN cable, the wired network set up screen appears automatically. To set up your TV’s wired network connection automatically, follow these steps: 1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network test screen appears and verifies the network