Samsung Television ES7100 User Manual
Have a look at the manual Samsung Television ES7100 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
connection. 3. When the connection has been verified, the " You are connected to the Internet. If you have any problems using online services, please contact your Internet Service Provider." message appears. Select OK. NIf the connection process fails, check the LAN port connection. NIf the automatic process cannot find
the network connection values or if you want to set the connection manually, go to the next section, "Manual Network Setup." Manual Wired Network Setup You can configure your TV's wired network connection manually when connecting your TV to a network that requires a Static IP address. NTo get the IP address, subnet mask, gateway, and DNS values, contact
your Internet Service Provider (ISP). To set up your TV's wired network connection manually, follow these steps: 1. Go to the Network Settings screen. (Network → Network Settings) 2. Select Start. The network connection screen appears and the verification process starts. 3. Select Stop. The verification process stops. Select IP Settings on the
network connection screen. The IP Settings screen appears. 4. Select the IP Mode, and then set the IP Mode to Enter manually . 5. Go to the IP Address entry field, and then select the IP Address using the remote. 6. Enter the first portion of the IP Address (for example, 105) into the first entry field using your remote. When done, go to the next field.
7. Enter the next portion of the IP Address. When done, go to the next field. 8. Repeat the entry process for each field in the IP Address. NIf you make a mistake when entering a number, re-enter the number to correct it. 9. When done, go to the Subnet Mask fields. 10. Repeat the same entry process for
Subnet Mask, Gateway, and DNS Server . 11. When done, select OK. The network test screen appears and the verification process starts. When the connection has been verified, the "You are connected to the Internet. If you have any problems using online services, please contact your Internet Service Provider. " message appears. Select OK.
Network Status Menu → Network → Network Status You can check the current network and Internet status. If the wired network connection failed... ●No network cable found. Check if your network cable is plugged in. If it is connected, make sure that the router is turned on. If it is on, try turning if off and on again. ●IP auto setting failed.
Try the following to set your IP address automatically or set your IP address manually by selecting IP Settings. 1.) Ensure that DHCP server is enabled on the router. 2) Unplug and re-plug- in the router. 3) Contact your Internet Service Provider for more information. ●Unable to connect to the network. Try the following: check if your IP address is set correctly in IP Settings. Contact your Internet Service Provider
for more information. ●Connected to your local network, but cannot connect to the Internet. Check the DNS settings in IP Settings or contact your Internet Service Provider to access the Internet. ●Network setup complete, but cannot connect to the Internet. Contact your Internet Service Provider to access the Internet.
Setting up a Wireless NetworkNetwork Settings Menu → Network → Network Settings Set up the wireless network connection so you can use various Internet services such as Smart Hub and AllShare Play and perform software upgrades. Automatic Wireless Network Setup Most wireless networks have an optional security system that requires devices that access the network to