Samsung Syncmaster B1930hd User Manual

							3-5Using the Product
Manual StoreYou can scan the frequency ranges available  on your television in your area and store all the chan-
nels found manually. 
 If a channel is locked using the  function, the PIN input window appears. 
• 
When scanning has finished, channels are updated in the channel list.
• When selecting   → 
•  -  - 
• When selecting   → 
•  -  - 
 • Digital Channel is only available in DTV mode.
• When it has finished, channels are updated in the channel list. 
 
•  Manual store for analogue channel.
•  (Programme number to be assigned to a channel)Inputting the appropriate progr am number on the screen. Sets the programme number using 
the  ▲,▼  or number (0~9) buttons
•  Adjusts repeatedly until the colour is of the bes t quality. Sets the colour system value using 
the  ▲ or  ▼ button.
•  -  -  - 
•  Adjusts repeatedly until the sound is of the bes t quality. Sets the sound system value using 
the  ▲ or  ▼ button.
•  -  -  - 
•  (When you know the number of the channel to be stored) You can store television channels, incl uding those received via cable networks.
When storing channels manually, you can choo se: Whether or not to store each of the 
channels found. The Programme number of each  stored channel which you wish to identify
•  (Air channel mode)  You can select a channel by entering the assigned number to each air broadcasting 
station in this mode.
•  (Cable channel mode)  You can select a channel by entering the assigned number for each cable channel in this 
mode.
•  (When you do not know the channel numbers)  Press the  ▲ or ▼  button to start the sear ch. The tuner scans the frequency range until the first 
channel or the channel that you  selected is received on your screen.
•  (When you store the channel  and associated programme number) 
Its used to restore the number user inpu ts. Set to OK by pressing the [ ] button. 
Cable Search Option Using this function,  you can manually add the channel range to be scanned by full search mode of 
the Auto Store function.
•  
Displays the frequency for the chan nel. (Differs in each country)
•  Displays available modulation values.
•  Displays available symbol rates.
MENUDESCRIPTION
 
						

							Using the Product3-5
GuideThe EPG (Electronic Programme Guide) information is provided by broadcasters. Using programme 
schedules provided by broadcasters, you can specif y programmes you want to watch in advance so 
that the channel automatically changes to the selected programme channel at the specified time. Pro-
gramme entries may appear blank or out of date depending on a channel status.
•  Red (View Mode)
View the list of programmes that are playing now or coming up.
•  Yellow (+24 Hours) Viewing the list of programmes to be broadcasted after 24 hours.
•  Blue (Ch. Mode) Select the type of channels you want to display on the  window.
 The  differs according to the antenna source. 
•  InformationDisplays details of the selected programme.
• (Page) Move to next or previous page.
• [ ] button • When selecting the current programme, you can watch the selected programme.
• When selecting the future programme, you ca n reserve to watch the selected programme. To 
cancel the schedule, press the [ ] button again and select Cancel Schedules.
MENUDESCRIPTION
 
						

							3-5Using the Product
Channel Manager Delete or set favourites channels and use the programme guide for digital broadcasts. 
Select a channel in the ,  or  screen.
•  Shows the channel list according to channel type.
•  Shows the group of the channel.
•  Shows all the currently  reserved programmes
Using the colour buttons with the Channel Manager.
•  Red (Antenna) Toggle among  or .
•  Green (Zoom) Enlarges or shrinks a channel number.
•  Yellow (Select) Select desired channels and press the Yellow button to set all the selected channels at the same 
time. The   mark appears to the left of the selected channels.
•  Blue (Sort) Change the list ordered by channel name or channel number.
• (Page) Move to next or previous page.
•  (Tools) Displays the Channel Manager option menu. (The options menus may differ depending on the 
situation.)
 Channel Status Display Icons
• : An analogue channel.
• : A channel set as a Favourite.
• : A channel selected by pressing the yellow button.
• : A Program currently being broadcast.
• : A locked channel.
• : A reserved program.
 
Channel List You can see all the channels searched.
You can select these options by simply pressi ng the [CH LIST] button on the remote control.
MENUDESCRIPTION
 
						

							Using the Product3-5
Setup
Channel List Transfer Imports or exports the channel map. You should connect a USB storage to use this function.
 • The PIN number input screen appears. Enter your 4 digit PIN number.
• The default PIN number of a new TV set is 0-0-0-0.
 
•  : Import channel list from USB.
•  : Export channel list to USB.
Fine Tune Use fine tuning to manually adjust  a particular channel for optimal reception.
 • If you do not store the fine-tuned channel in memory, adjustments are not saved.
• Fine tuned channels that have been saved are marked with an asterisk ‘*’ on the right-hand 
side of the channel number in the channel banner.
• To reset the fine tuning setting, press the  ▼ button to select , then press the [ ] 
button.
• Only Analogue TV channels can be fine tuned.
 
MENUDESCRIPTION
 
						

							3-5Using the Product
MENUDESCRIPTION
Plug & PlayThis brings up the menu items that appeared when you first plugged in the TV.
Time• 
Setting the clock is necessary in order to  use the various timer features of the TV.
•  You can set up the current time manually or automatically.
•  - 
 • Depending on the broadcast station and si gnal, the auto time may not be set 
correctly. If this occurs , set the time manually.
• The Antenna or cable must be connected in  order to set the time automatically.
 
• 
You can set the current time manually.
 • This function is only available when  is set to .
• You can set the day, month, year, hour and  minute directly by pressing the number 
buttons on the remote control.
  • The current time will appear every time you press the [INFO] button.
• If you disconnect the power cord, you have to set the clock again.
 
• 
The sleep timer automatically shuts  off the TV after a preset time .
•  -  -  -   -  -  - 
 Press the [TOOLS] button to display the Tools menu. You can also set the sleep timer by 
selecting   → .
 To cancel the   function, select . 
 
						

							Using the Product3-5
• 
Three different on / off timer settings can be made. You must set the clock first.
•  / Set the ,  and .
(To activate the timer with the setti ng you’ve chosen, set to .)
• Set the desired volume level.
•  Select TV or USB content to be played w hen the TV is turned on automatically. 
(USB can be selected only when a USB device is connected to the TV)
•  View antenna type. ( or ).
 You can set the  by selecting   → . 
•  (when the Source is set to TV)
Select the desired channel.
•  (when the Source is set to USB) Select a folder in the USB device containing music or photo files to be played when the TV is 
turned on automatically.
 • If there is no music file on the USB device or  the folder containing a music file is not 
selected, the Timer function  does not operate correctly.
• When there is only one photo file in  the USB, the Slide Show will not play.
• If a folder name is too long, the folder cannot be selected.
• Each USB you use is assigned its own folder . When using more than one of the same 
type of USB, make sure the folders assigned to each USB have different names.
 
• 
Select , , , ,  or .
 • When  is selected, press the  ► button to select the desired day of the 
week. Press the [ ] button over the des ired day and the ( ) mark will appear.
• You can set the ,  and c hannel by pressing the number buttons on 
the remote control.
• Auto Power Off  When you set the timer On, the television  will eventually turn off if no controls are 
operated for 3 hours after the TV was turned on by the timer. This function is only 
available in timer On mode and prevents overheating, which may occur if a TV is on 
for too long time.
 
MENUDESCRIPTION
 
						

							3-5Using the Product
Language•  
The language chosen affects only the language of the OSD. 
•  You can set the Teletext language by selecting the language type.
 English is the default in cases where the se lected language is unavailable in the broadcast. 
• 
Primary Audio Language / Secondary Audio La nguage / Primary Subtitle Language /Secondary 
Subtitle Language / Primary Teletext Language /Secondary Teletext Language
Using this feature, users can select one of  the languages. The language selected here is the 
default when the user selects a channel.
If you change the language setting, the Subtitle  Language, Audio Language, and the Teletext 
Language of the Language menu are automatically changed to the selected language.
The Subtitle Language, Audio Language, and the  Teletext Language of the Language menu show 
a list of languages supported by the current  channel and the selection is highlighted.
If you change this language setting, the new selection is only valid for the current channel. The 
changed setting does not change the setting of  the Primary Subtitle Language, Primary Audio 
Language, or the Primary Teletext  Language of the Preference menu.
SubtitleYou can activate and deactivate the su btitles. Use this menu to set the .
 under the menu is the basic subtitle and  is the subtitle for a hearing-
impaired person.
• Switches subtitles on or off. 
•  Sets the subtitle mode. 
•  - 
•  Set the subtitle language.
 • If the programme you are watching does not  support the  function, 
 automatically activates even th ough  mode is selected.
• English is the default in cases where the selected language is unavailable in the broadcast.
• You can select these options simply by pre ssing the [SUBT]. button on the remote control.
 
Digital TextIf the programme is broadcast with digital text, this feature is enabled. 
•  -  (UK only)
 • MHEG (Multimedia and Hypermedia Information Coding Experts Group)
• An International stan dard for data encoding systems used  in multimedia and hypermedia. 
This is at a higher level  than the MPEG system which in cludes data-linking hypermedia 
such as still images, character service, anim ation, graphic and video files as well as 
multimedia data. MHEG is user runtime inte raction technology and is being applied to 
various fields including VOD (Video-On-Demand), ITV (Interactive TV), EC (Electronic 
Commerce), tele-education, tele-conferencing,  digital libraries and network games. 
 
MENUDESCRIPTION
 
						

							Using the Product3-5
Security • Before the setup screen appears, the PIN number input screen appears. Enter your 4 digit 
PIN number.
• The default PIN number of a new TV set is  0-0-0-0. You can change the PIN by selecting 
 from the menu.
 
• 
This feature allows you to prev ent unauthorized users, such as  children, from watching unsuitable 
programme by muting out video and audio.
•  -  
 Available only when the  source is set to . 
• 
This feature allows you to prev ent unauthorized users, such as  children, from watching unsuitable 
programme by a 4-digit PIN (Personal Identificat ion Number) code that is defined by the user.
•  Press to unlock all TV ratings.
 When the parental ratings are set, the   symbol is displayed. 
• You can change your personal ID numbe r that is required to set up the TV.
 If you forget the PIN code, press the remote control buttons in the following sequence, which 
resets the PIN to 0-0-0-0: [POWER] (Off)  → [MUTE] → 8 → 2  → 4 → [POWER] (On).
 
MENUDESCRIPTION
 
						

							3-5Using the Product
General• 
Conserve power by turning the monitor off when  the PC is not used for a specified period.
•  - 
 Available in  Mode Only  
•  When connecting to a game console such as Pl ayStation™ or Xbox™, you can enjoy a more 
realistic gaming experience by selecting game menu.
•  - 
 • Restrictions on game mode (Caution)
• To disconnect the game console and connect another external device, set  to  in the setup menu. If you  display the TV menu in , the 
screen shakes slightly.
• If  is  : •  mode is automatically change d to  and cannot be changed.
•  mode is automatically changed to  and cannot be changed. Adjust  the sound using the equalizer.
•  is not available in regular  and  mode.
• If the picture is poor when external device  is connected to TV, check if  is 
. Set  to  and connect external devices.
 
• 
Set the Transparency of the menu.
• - 
• A melody sound can be set to come on when the monitor is powered On or Off. 
•  -  -  - 
 The  does not play
• When no sound is output from the TV be cause the [MUTE] button has been pressed.
• When no sound is output from the TV bec ause the volume has been reduced to minimum 
with the volume [-] button.
• When the TV is turned off by  function.
 
MENUDESCRIPTION
 
						

							Using the Product3-5
Input
PIP You can use the PIP feature to simultaneously watch the TV tuner and one extemal video source. 
This product has one built-in tuner, which does  not allow PIP to function in the same mode.
 • PIP Settings.
• If you turn the TV off while watching in PIP mode and turn it on again, the PIP window will 
disappear.
• You may notice that the picture in the PIP win dow becomes slightly unnatural when you use 
the main screen to view a game or karaoke.
 
• 
You can activate or deactivate the PIP function. 
•  - 
•  You can select the channel for the sub-screen. 
  is available when the  is set to . 
•You can select a source of the sub-picture.
•  → /   
You can select a size of the sub-picture.
•  → /   /   / 
You can select a positio n of the PIP-picture.
• Sound Select You can choose the desired sound (Main / Sub) in PIP mode.
•  - 
Common Interface •  This enables the user to sele ct from the CAM-provided menu.
Select the CI Menu based on the menu PC Card.
•  This contains information on CAM inse rted in the CI slot and displays it.
The Application Info inserting is about the CI CA RD. You can install the CAM anytime whether the 
TV is ON or OFF.
MENUDESCRIPTION