Samsung Syncmaster B1930hd User Manual

							1-3Major Safety Precautions
 Caution
Avoid moving the product by pulling the 
power cord or antenna cable.
• Otherwise, it may result in electric 
shock, fire or a pr oblem with the product 
due to damage to the cable.When a gas leak occurs, do not touch the 
product or the power plug and ventilate 
immediately.
• A spark may result in an explosion or  fire.
• During a thunder or lighting storm, do  not touch the power cord or antenna 
cable.
Avoid lifting up or moving the product by 
holding only the power cord or signal cable.
• Otherwise, it may result in electric shock, fire or a pr oblem with the product 
due to damage to the cable.Avoid using or placing inflammable spray or 
objects near the product.
• This may result in an explosion or fire.
Take care not to block the vent by a table 
cloth or curtain.
• Otherwise, it may result in fire due to  internal overheating.Avoid inserting metal objects such as a 
chopsticks, coins or hairpins, or inflamma-
ble objects into the product (the vents, 
ports, etc).
• If water or substances enters the product, turn the power off, unplug the 
power cord and contact a service centre.
• Otherwise, it may result in a problem  with the product, electric shock or fire.
Avoid placing a liquid container such as a 
vase, flowerpot, beve rage, cosmetics or 
drugs, or a metal object over the product.
• If water or substances enter the product,  turn the power off, unplug the power 
cord and contact a service centre.
• Otherwise, it may result in a problem  with the product, electric shock or fire.
Displaying a still image for a long time may 
create a persistent image  or stain on the 
screen.
• If you do not use the product for a long  time, use the power-saving mode or set 
the screensaver to the moving picture 
mode.When not using the product for a long time 
such as leaving your home, unplug the 
power cord from the wall outlet.
• Otherwise, it may cause dust accumulation and result  in fire caused 
by overheating or short circuit or result in 
an electric shock.
Set the appropriate resolution and fre-
quency for the product.
• Otherwise, it may result in eye strain.Avoid turning the product upside down or 
move the product holding only the stand.
• This may cause the product to fall,  resulting in damage to the product or 
injury.
Watching the product from too close a dis-
tance continuously may damage your eye-
sight.Avoid using a humidifier or cooker near the 
product.
• Otherwise, it may resu lt in electric shock 
or fire.
It  is  i mp or t ant  t o giv e  y our  e ye s  s om e r es t  ( 5 
minutes every hour) when viewing the prod-
uct screen for long periods of time.
• This will alleviate any eye strain.Since the display panel is hot after using it 
for a long time, do not touch the product.
 
						

							Major Safety Precautions1-3
Maintaining the Correct Posture when Using this Product
Keep the small accessories in a location out 
of the reach of children.Take care when adjusting the angle of the 
product or the height of the stand.
• If your hand or finger is caught, you may 
be injured.
• If the product is tilted excessively, the  product may fall and this may result in 
injury.
Avoid placing a heavy object over the prod-
uct.
• Otherwise, it may result in a problem with the product or injury.When using headphones or earphones, do 
not turn the volume too high.
• Having the sound too loud may damage your hearing.
Be careful that children do not place the bat-
teries in their mouths when removed from 
the remote control. Place the battery in a 
location that children or infants cannot 
reach.
• If children have had the battery in their mouths, consult your doctor 
immediately.When replacing the batteries, insert them 
with right polarity (+, -).
• Otherwise, the battery may become damaged or it may cause fire, personal 
injury or damage due to leakage of the 
internal liquid.
Use only specified standard batteries. Do 
not use new and used  batteries together.
• This may cause a battery to break or  leak and may cause fire, injury, or 
contamination (damage). The batteries (and rechargeable batteries) 
are not ordinary refuse and must be 
returned for recycling purposes. The cus-
tomer is responsible for returning the used 
or rechargeable batteries for recycling.
• The customer can  return used or 
rechargeable batteries to a nearby 
public recycling centre or to a store 
selling the same type of the battery or 
rechargeable battery. 
Maintain the correct posture when using this product.
• Straighten your back.
• Keep a distance of 45~50 cm (15~19 inches) from your eyes to the screen. Look down at  the screen and face the screen forwards.
• Maintain the correct posture when using this product. 
• Adjust the angle of the product so that light is not reflected onto the screen.
• Keep your elbow at a right angle and keep your arm level with the back of your hand.
• Keep your elbow at a right angle.
• Place your heels flat on the ground while keep ing your knees at an angle of 90 degrees or 
higher and maintain the position of your arm so that your arm is below your heart.
 
						

							2-1Installing the Product
2 Installing the Product
2-1 Package Contents
 • Unpack the product and check if all of the following contents have been included.
• Store the packaging box in case you need to move the Product later. 
• If any items are missing, contact your dealer.
• Contact a local dealer to purchase optional items.
 
 • The colour and the appearance may differ depending on the product, and the specifications are subject to change 
without prior notice to improve the performance.
• The cleaning cloth is supplied with black high-glossy models only.
 
CONTENTS
Quick Setup Guide Warranty Card
(Not available in all locations) User Manual
Power Cord
D-Sub CableStereo CableStand Connector Stand Base
Remote ControlBatteries (AAA X 2)  Cleaning Cloth Cable Holder
SOLD SEPARATELY
HDMI Cable HDMI to DVI Cable 
 
						

							Installing the Product2-2
2-2 Installing the Stand
 Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. 
Insert the Stand Connector into the Stand Base in the direction shown by the figure. 
Check if the Stand Connector is firmly connected.
Turn the connecting screw at the bottom of the stand fully so that it is completely fixed.
Place a soft cloth over the table to protec t the product and place the product onto the 
cloth face down.
 
						

							2-2Installing the Product
 The colour and the appearance may differ depending on the product, and the specifications are subject to change without 
prior notice to improve the performance.
 
Hold the main body of the product wi th your hand as shown by the figure.
Push the assembled stand into the main body in the direction of the arrow as shown in 
the figure.
- Caution
Do not lift the product holding only the stand
 
						

							Installing the Product2-3
2-3 Removing the Stand
 Before removing the stand, place the product down on a flat and stable surface so that the screen faces downwards. 
 The colour and the appearance may differ depending on the pr oduct, and the specifications are subject to change without 
prior notice to improve the performance.
 
Place a soft cloth over the table to protect the product and place the product face down.
Hold the main body of the product with your hand as shown by the figure. 
Pull the stand in the direction of the arro w as shown in the figure to separate it.
Turn the connecting screw at the bottom of the stand to separate it.
Take the Stand Connector out of the Stand by pulling it in the direction of the arrow as 
shown in the figure.
 
						

							2-4Installing the Product
2-4 Attaching a Wall Mount/Desktop Stand
Attaching a Wall Mount/Desktop Stand(not supplied)
This product provides a stand mount of 75 mm x 75 mm (2 .95 x 2.95 inches) that complies with the VESA specifications.
 : Wall/Desktop Stand Mount
 : Wall mount kit/desktop stand (not supplied)
1. Turn the product off and unplug the power cord from the wall outlet.
2. Place a soft cloth or cushion on a flat surface to  protect the panel and place the product face down.
3. Remove the screw from the stand and separate the stand.
4. Align the groove of the part of the product that is to be conne cted to the stand with the groove in the stand (desk-top stand, 
wall mount stand or another stand) and fi rmly fix the stand by fastening the screw.
 • If you use a screw that is longer than the standard sp ecifications, the inside of the product may be damaged.
• For wall mounts that are not compatib le with the standard VESA specifications, the length of the screw may differ 
depending on the corresponding specifications.
• Do not use screws that are incompatible with the stand ard VESA specifications and do not assemble them using 
excessive force.
This may result in damage to the product or injury due to the product falling.
The company shall not be held liable for any damage or injury.
• The company shall not be held liable for any damage to th e product or injury caused by using a stand that is not 
compatible with the specified specifications or due to an  installation not performed by an authorized installation 
engineer. 
• When installing the product using a wall  mount, purchase a wall mount that provides at least 10 cm of space from the 
wall.
• The company shall not be held liable for any problems caused  by using a stand that is not compatible with the specified 
specifications.
• Use the wall mount according to the international specifications.
 
 
						

							Installing the Product2-5
2-5 Connecting to a Computer
1. Connect the product to a PC depending on the video output supported by the PC.
 The connecting part may differ depending on the product model. 
When the graphics card provides a D-Sub  output
• Connect the [PC IN] port of the product to the D-Sub port of the PC with the D-Sub cable. 
When the graphics card provides a DVI  output
• Connect the [HDMI(DVI) IN] port of the product to  the DVI port of the PC with the HDMI to DVI cable.
When the graphics card provides an HDMI output
 
						

							2-5Installing the Product
• Connect the [HDMI(DVI) IN] port of the product to the HDMI port of the PC with the HDMI cable.
2. Connect the [HDMI/PC/DVI-D AUDIO IN] port on the re ar side of the monitor to the sound card of the PC.
3. To use the monitor, connect the power cable to a power outlet and the [POWER] port on the monitor.
(The input voltage is switched automatically.)
 
						

							Installing the Product2-5
 • You may enjoy clear and quality sound from the computer sound card using the monitors speakers. (You dont need to 
install separate speakers for your computer.)
• You may get a blank screen depending on the type of video  card you are using if you connect the D-sub cables 
simultaneously to one computer.