Samsung Syncmaster B1930hd User Manual

							3-1Using the Product
3 Using the Product
3-1 Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
 To return to the previous step, press the Red button. 
1.Press the [POWER ] button on the remote control.
 • You can also use the [ ] button on the TV.
• The message  is displayed.
 
2.Press the [ ] button. Select the a ppropriate language by pressing the  ▲ or  ▼ button. 
Press the [ ] button to confirm your choice.
3. Press the  ◄ or  ► button to select  or , then the [ ] button.
 • We recommend setting the TV to  mode  for the best picture in your home environment.
•  mode is only intended for use in retail environments. If the unit is accidentally set to   mode and you want to return to  (Standard ): Press the volume button on the TV. When the volume 
OSD is displayed, press and hold the [MENU] button on the TV for 5 seconds.
 
4. Press the [ ] button.
Select the appropriate country by pressing the  ▲ or  ▼ button. Press the [ ] butto n to confirm your choice
5. Press the [ ] button.
Press the  ▲ or  ▼ button to select  or , then press the [ ] button.
 •  :  antenna signal. 
•  :  antenna signal. 
 
6. Press the  ▲ or  ▼ button to select the cha nnel source to memorise. 
Press the  ▼ button to select , then press the [ ] button.
 • When setting the antenna source to , a step appears allowing you to set a value for the digital channel 
search. For more informa tion, refer to  → .
• : Digital and Analogue channels.
• : Digital channels.
• : Analogue channels.
• The channel search will  start and end automatically.
• Press the [ ] button at any time to interrupt the memorisation process.
•
 
7. Press the [ ] button.
Press the  ▲ or  ▼ button to select , then Press the [ ] button. 
 • If you select ,  is displayed.
 
						

							Using the Product3-1
• If you have received a digital signal, the time will be set automatically. If not, select  to set the clock. 
8.The description for the connection method providing the best  HD screen quality is displayed. Check the description and press 
the [ ] button.
9. The message  is displayed.  When you have finished, press the [ ] button.
If you want to reset this feature...
1. Press the [MENU] button to  display the menu. Press the  ▲ or  ▼ button to select , then press the [ ] button.
2. Press the [ ] button again to select .
3. Enter your 4 digit PIN number.
The default PIN number of a new TV set is 0-0-0-0. You  can change the PIN by selecting  from the menu.
 The  feature is only available in the  mode. 
 
						

							3-2Using the Product
3-2 Viewing the Control panel
NUMBERICONDESCRIPTION
Power Indicator This light is lit when operating normally, and blinks once when your adjustments are 
saved.
 For more information on the power-saving function, refer to the power saving 
function in More Information. When not using the product for a long time, 
unplugging the power cord is recommended to minimize power consumption.
 
Speaker -
Toggles between all the available input sources. In the on-screen menu, use this but-
ton as you would use the [ ] button on the remote control. 
Press this button to view the On Screen Display (OSD).
This button is also used to exit the OSD or to return to a higher-level OSD menu.
Moves from one menu item to another hori zontally or adjusts selected menu values.
Adjusts the audio volume. 
Use these buttons to navigate the menu or to adjust a value in the OSD.
Press to change channels in  mode.
Press this button to turn the product on or off.
 
						

							Using the Product3-3
3-3 Remote Control
 The performance of the remote control may be affected by a TV or other electronic device operating near the product, 
causing a malfunction due to interference with the frequency.
 
 POWER
Turns the product On/Off. SOURCE
Press the button to change the 
input signal SOURCE.
Changing the SOURCE is only 
allowed for external devices that 
are connected to the monitor at 
the time.
Number Buttons
Press to change the channel.
TTX / MIX
TV channels provide written infor-
mation services via teletext.
, , , , , , ,  , PRE-CH
This button is used to return to 
the immediately previous chan-
nel.
-  +
Press to increase or decrease the 
volume. MUTE
Adjusts the audio volume.
 MENU
Opens the on-screen menu and 
exits from the menu or closes the 
adjustment menu. P 
Press to cha nge channels.
MEDIA.P button
Allows you to play music files and 
pictures.CH LIST 
It displays Channel List on the 
screen.
TOOLS
Use to quickly select frequently 
used functions.GUIDE
Electronic Program Guide (EPG) 
display.
 Up-Down Left-Right but-
tons  
Moves from one menu item to 
another horizontally, vertically or 
adjusts selected menu values. INFO
Current picture information is dis-
played on the upper left corner of 
the screen.
 RETURN
Returns to the previous menu. EXIT
Exits from the menu screen.
Colour buttons
Use these buttons in the ,  menu, etc.AD button
 selection.
P.SIZE button
 selection.
SUBT. button
 display
P.MODE button
Press to select the .
S.MODE button
Press to select the .
DUAL button
Sound effect selection.
Use these buttons in the  and  modes.
 
						

							3-3Using the Product
Installing Batteries in the Remote Control 
1.Lift the cover at the back of the remote  control upward as shown in the figure.
2. Install two AAA size batteries.
 Make sure to match the +and - ends of the ba tteries with the diagram inside the compartment. 
3.Close the cover.
 Remove the batteries and store them in  a cool, dry place if you won‘t be using the remote control for a long time.
If the remote control doesn‘t work, check the following :
• Is the TV power on?
• Are the plus and minus ends of the batteries reversed?
• Are the batteries drained?
• Is there a power outage or is the power cord unplugged?
• Is there a special fluorescent  light or neon sign nearby?
 
 
						

							Using the Product3-4
3-4 Teletext Feature
Most television stations provide written information services via Teletext. The index page of the teletext service gives you 
information on how to use the service. In addition, you can select  various options to suit your requirements by using the remot e 
control buttons.
 For teletext information to be displayed correctly, channel rece ption must be stable. Otherwise, information may be missing 
or some pages may not be displayed.
You can change teletext pages by pressing the numeric buttons on the remote control.
 
(teletext on/mix)
Press to activate teletext mode after 
selecting the channel providing the 
teletext service.  Press it twice to 
overlap the teletext with the current 
broadcasting screen.(mode)
Press to select the teletext mode 
(LIST/FLOF). If you press it in the 
LIST mode, it switches into the 
List save mode. In  the List save 
mode, you can save teletext 
page into list using the  (store) 
button.
(index)
Used to display the index (contents) 
page at any time while you are 
viewing teletext.(sub-page)
Used to display the available 
sub-page.
(size)
Press to display the double-size let-
ters in the upper half of the screen. 
For lower half of the screen, press it 
again. To display normal screen, 
press it once again.(page up)
Used to display the next teletext 
page.
(hold)
Used to hold the display on a given 
page if the selected page is linked 
with several secondary pages which 
follow on automatically. To resume, 
press it again.(page down)
Used to display the previous tele-
text page.
Colour buttons (red / green / yellow / 
blue)
If the FASTEXT system is used by a 
broadcasting company, the different 
topics covered on a teletext page 
are colour-coded and can be 
selected by pressing the coloured 
buttons. Press one of them corre-
sponding to the required. The page 
is displayed with other coloured 
information that can be selected in 
the same way. To display the previ-
ous or next page, press the corre-
sponding coloured button.(store)
Used to store the teletext pages. 
(reveal)
Used to display the hidden text 
(answers to quiz games, for 
example). To display normal 
screen, press it again.
(cancel)
Used to display the broadcast 
when searching for a page.
 
						

							3-4Using the Product
Typical Tetetext page
PARTCONTENTS
A Selected page number.
B Broadcasting channel identity.
C Current page number or search indications.
D Date and time.
EText.
F Status information. FASTEXT information.
 
						

							Using the Product3-5
3-5 Using the Screen Adjustment Menu (OSD: On Screen Display)
The Screen Adjustment Menu (OSD: On Screen Display) Structure
Picture [PC / HDMI PC Timing]
 The default setting may be different depending on the selected  Input Mode (input signal source selected in External Input 
List) and the selected resolution
 
TOP MENUSSUB MENUS
Picture [PC / HDMI PC Tim-
ing] MagicBright MagicAngle Contrast Brightness Sharpness
Eco Solution Auto Adjustment Scre
en Picture Options Picture Reset
Picture [TV / Ext. / AV or 
Component / HDMI1 / 
HDMI2]Mode
MagicAngle Backlight Contrast Brightness
Sharpness Colour Tint (G/R) Eco Solution Advanced Set-
tings
Picture Options Picture Reset
Sound ModeEqualizer Virtual Surround Dialog Clarity Audio Lanugage
Audio Format Audio Descrip- tion Auto Volume Speaker Select Additional Set-
ting
Sound Reset
Channel Antenna Country Auto Store Manual Store Cable Search 
Option
Guide Channel Man-
ager Channel List Channel List 
TransferFine Tune
Setup
Plug & Play Time Language SubtitleDigital Text
Security General PIPCommon Inter-
face
Input Source List Edit Name
ApplicationMedia Play Anynet+ (HDMI-
CEC)
Support Self Diagnosis Software 
Upgrade HD Connection 
GuideContact Sam-
sung
 
						

							3-5Using the Product
MENUDESCRIPTION
MagicBright  is a feature providing an opti mum viewing environment depending on the contents of 
the image you are watching. Current ly five different modes are available: , , 
,  and . Each  mode has its own pre-configured brightness 
value. 
•
High Brightness
For watching motion pictures such as a Blu-Ray or DVD.
•  For working with a mixture of images such as texts and graphics.
•  For documents or work involving heavy text.
•   automatically detects the dist ribution of the visual signal and adjusts to 
create an optimum contrast.
• Although the values are carefully chosen by our engineers, the pre-configured values may not be 
comfortable to your eyes depending on your taste.
If this is the case, adjust the Brightne ss and Contrast by using the OSD menu.
MagicAngleThis feature allows you to see optimal screen quality according to your viewing position.
When viewing the screen at an angle from below, above or the side of the monitor, by setting the 
appropriate mode for each position you can obtain  a similar picture quality as viewing the screen 
directly from the front.
 Set to  when viewing dire ctly in front of the screen. 
•   
Select when viewing from the front position.
•     Select when viewing from a slightly lower position.
•     Select when viewing from the lower position.
•     Select when viewing from the upper position.
•     Select when viewing from the left or right position.
 Press the [TOOLS] button to di splay the Tools menu. You can also set the  by 
selecting   → .
 
						

							Using the Product3-5
Contrast / Brightness / 
Sharpness You can use the on-screen menus to change the contra
st and brightness according to personal pref-
erence.
• 
Adjust the Contrast.
•  Adjust the Brightness.
•  Adjust the Sharpness.
 This menu is unavailable when  is set to  mode. 
Eco Solution You can choose various options of  features. 
•  You can reduce the power consumption by adjusting the screen brightness.
•  -  -  -  -  - 
 • If you select , the screen is turned off, but the sound remains on. Press any 
button except volume button to turn on the screen.
• Not available in PC/HDMI PC timing.
 
•  Saves power by turning the TV off when no signal is received from any source.
•  -  -  - 
 Disabled when the PC is on DPM(Display Power Management). 
Auto Adjustment  The values of ,  and  are adjusted automatically.
By changing the resolution in the control panel, auto function is performed.
 Available in  Mode Only 
 Press the [TOOLS] button to disp lay the Tools menu. You can also set the auto adjustment by 
selecting   → .
Screen • 
Removes noise such as vertical stripes.
 adjustment may move the screen image area. You may relocate it to the centre using 
the horizontal control menu
•  Removes noise such as  horizontal stripes.
If the noise persists even after  tuning, repeat it after adjusting the frequency (Coarse).
•  Adjusts the screen location horizontally and vertically.
•  Image parameters are replaced with the factory default values.
 Available in  Mode Only 
MENUDESCRIPTION