Samsung Syncmaster 710n Quick Start Guide

 
 
 
Press Preview button on the Color Calibration.  
The above picture will be shown. 
1. Press View Calibrated button to see th e calibration effect which you adjusted.  
2. Press View Uncalibrated button  to see the original image.  
  
 

       Overview      |     Install      |     OSD Mode     |     Color 
Calibration     
|     Uninstall      |     Troubleshooting        
 
 Uninstall 
The MagicTune program can be removed only by us ing the Add or Remove Programs option of the 
Windows Control Panel.  
Perform the following steps remove MagicTune. 
1. Go to [Tusk Tray]  [Start]  [Setti ngs] and select [Control Panel] in the menu. If the program runs on 
Windows XP, go to [Control Pa nel] in the [Start] menu.  
 
2. Click the Add or...

       Overview     |     Installation      |     OSD Mode     |     Color 
Calibration     
|     Uninstall     |     Troubleshooting        
 
 Troubleshooting 
zMagicTune may not work in case monitor is replac ed or driver of graphic card is updated while 
MagicTune is operating. If so , please restart the system. 
 
 
 Check when MagicTune does not function properly.   
 
* MagicTune feature is found only on PC (VGA) with Window OS that supports Plug and   Play. 
 
 
 
zVisit the MagicTune website...

 
 Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do need assistance, please call, the phone number on the Information 
section or contact your dealer .
 
 
SymptomCheck ListSolutions
No images on the 
screen. I cannot turn 
on the monitor.Is the power cord connected properly?Check the power cord connection and 
supply.
Can you see  Check Signal Cable  on 
the screen? (Connected using the D-sub cable)  
Check the signal cable...

x 1024 60Hz message appears for 
one minute and th en disappears.  
Please change to  the recommended 
mode during this one-minute period.  
(The message is displayed again if the 
system is rebooted.) 
There is no image on the screen.  
Is the power indica tor on the monitor 
blinking at 1 second intervals?The monitor is in PowerSaver mode. 
 
press a key on the keyboard to activate 
the monitor and restore the image on 
the screen.  
 
If there is still no image, press the 
 Source  button.  
Then...

 
found. be supported. 
 
 
 
 Check the following items if there is trouble with the monitor.  
1. check if the power cord and the video cables are properly connected to the computer.  
2. Check if the computer beeps more than 3 times when booting. 
(If it does, request an after-service for the main board of the computer.)  
3. If you installed a new video card or if you assemb led the PC, check if the installed the adapter(video) 
driver and the monitor driver.  
4. Check if the scanning  ratio of the...

 
 
Failure of any of the boxes to a ppear indicates a problem with your monitor. This box also appears 
during normal operation if the video ca ble becomes disconnected or damaged. 
 
4. Turn off your monitor and reconnect the video cable;  then turn on both your computer and the monitor.  
If your monitor screen remains blank after using the previous procedure, check your video 
controller and computer system; your monitor is functioning properly. 
   
 Warning Messages  
 
If there is something wrong...

 
 Before calling for service, check the information in this section to see if you can remedy any 
problems yourself. If you do need assistance, please call, the phone number on the Information 
section or contact your dealer .
 
 
SymptomCheck ListSolutions
No images on the 
screen. I cannot turn 
on the monitor.Is the power cord connected properly?Check the power cord connection and 
supply.
Can you see  Check Signal Cable  on 
the screen? Check the signal cable connection.
If the power is on, reboot...

 
Is the power indicator on the monitor 
blinking at 1 second intervals? 
press a key on the keyboard to activate 
the monitor and restore the image on 
the screen.
The screen shows 
strange colors or just 
black and white.Is the screen displaying only one color 
as if looking at the screen through a 
cellophane paper? Check the signal cable 
connection.Make sure the video card is 
fully inserted in its slot.
Have the screen colors become strange 
after running a program or due to a 
crash between...

 
 
 General  
General
Model NameSyncMaster 710T
LCD Panel
Size17 Diagonal
Display area337.92 (H) x 270.336 (V)
Pixel Pitch0.264mm (H) x 0.264mm (V)
Typea-si TFT active matrix
Synchronization
Horizontal30 ~ 81 kHz
Vertical56 ~ 75 Hz
Display Color
16,194,277 Colors 
Resolution
Optimum resolution1280 x 1024@60 Hz
Maximum resolution1280 x 1024@75 Hz
Input Signal, Terminated
RGB Analog , DVI(Digital Visual In terface) Compliant Digital RGB  
0.7Vp-p Positive at 75 ohms 
Separate H/V sync, Composite sync, SO...