Samsung Syncmaster 710n Quick Start Guide

  
  
  
 
 
  
     
    
 
SyncMaster 710T / 910T / 710N / 910N / 510T / 510N / 512N 
 / 712N / 912N 
 
 
 

 
 
 
 
 
 
Failure to follow directions noted by this symbol could result in bodily harm or damage to 
equipment.  
 
 
 
Prohibited Important to read and un derstand at all times 
Do not disassemble Disconnect the plug from the outlet 
Do not touch Grounding to prevent an electric shock 
 
 
 
 
 
  Power 
  
When not used for extended periods of  time, set your computer to DPMS.  
If using a screen saver, set it  to the active screen mode.  
 
 
 Do not use a damaged or loose plug. 
zThis may cause an...

 
 
 
  Do not pull the plug out by the wire  nor touch the plug with wet hands. 
zThis may cause an electric shock or fire.  
 
 
 
  Use only a properly grounded plug and receptacle. 
zAn improper ground may cause electric shock or equipment damage.  
 
 
 
  
  Do not excessively bend the plug an d wire nor place heavy objects upon 
them, which could cause damage.   
zThis may cause an electric shock or fire.  
 
 
 
  
  Do not connect too many extensio n cords or plugs to an outlet.  
zThis may...

 Set down the monitor carefully. 
zIt could be damaged or broken.  
 
 
Do not place the monitor face down. 
zThe TFT-LCD surface may be damaged.  
 
 
Installing a wall bracket must be done by a qualified professional. 
zInstallation by unqualified personnel may result in injury.  zAlways use the mounting device sp ecified in the owners manual.  
 
 
Leave a space for ventilation between the product and the wall. 
zPoor ventilation may cause the interior te mperature to rise and lead to a fire....

 
 
Contact a Service Center or Customer Center for interior cleaning once a 
year. 
zKeep the products interior  clean. Dust which has accumulated in the interior 
over an extended period of time may cause malfunction or a fire.  
 
 
 
 
 
  Other  
  Do not remove cover (or back). No user serviceable parts inside. 
zThis may cause an electric shock or a fire.  zRefer servicing to qualified service personnel.  
 
 
If your monitor does not operate normally - in particular, if there are any 
unusual...

zThis may cause a breakdown, electric shock or a fire due to damage to the 
cable.  
 
 
Do not cover the vents on the monitor cabinet. 
zBad ventilation may cause a breakdown or fire.  
 
 
Do not place water containers, chem ical products or small metal objects on 
the monitor. 
zThis may cause malfunction, an electric shock or a fire.  zIf a foreign substance enters the moni tor, unplug the power cord and contact 
the  Service Center  .  
 
 
Do not use or store inflammable  substances near the...

 
 
To ease eye strain, take at least a five-minute break after every hour of 
using the monitor. 
 
 
Do not use the monitor where it can  be exposed to strong vibrations. 
zExposure to strong vibrations can be a fire hazard and shorten the life of the 
monitor.  
 
 
When moving the monitor, turn the power switch off and unplug the 
power cord.  
Make sure that all cables, including the antenna cable and cables 
connecting to other device s, are disconnected before moving the monitor. 
zFailure to...

 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer. 
 
 
 
 
 Unpacking 
    Option 1 
 
  Moniter & Simple stand  Bottom Hanger 
    Option 2 
 
  Monitor & Pivot stand
 
 
   Manual  
 
Users Guide, Monitor   
SyncMaster 510T / 710T / 910T
SyncMaster 510T
 

 Quick Setup Guide Warranty Card Dirver, Natural Color 
software, MagicTune™  software CD 
 
 
     Cable
   
D-Sub Cable  Power Cord  DVI Cable (option) 
 
 
 
 Front  
 
 
  1. Menu button [ ] 
 
Opens the OSD menu. Also used to exit the OSD menu or return to the 
previous menu.  
2. MagicBright button   [] 
 
 
 
 
MagicBright is a new feature prov iding optimum viewing environment 
depending on the contents of the image you are watching. Currently four 
different modes are available: Custom, Text,...

 
 
  
  If this is the case, adjust the 
Brightness and Contrast by using the 
OSD menu. 
3. Brightness button [ ]
When OSD is not on the screen, Push  the button to adjust brightness.
2,3. Adjust buttons [ ]
Adjust items in the menu.
4. Enter button [ ] /   Source button 
Activate a highlighted menu item. /  
Push the Source, then Selects the Video signal while the OSD is off. 
(When the Source button is presse d to change the input mode, a 
message appears in the center of the screen displaying the...