Samsung Syncmaster 710n Quick Start Guide

SyncMaster 710T / 910T (Option)
 
 
  
  
  
  
(The configuration at the back of the monitor may vary from product to product.)   
  
  1. Power port
Connect the power cord for your monitor to the power port on the back 
of the monitor.
2. DVI port Connect the DVI Cable to the DVI Port on the back of your Monitor. 
3. D-sub 15-pin port Connect the signal cable to the 15-pin, D-sub connector on the back 
of your monitor. 
4. Power on/off Switch 
(option)
Use this button for turn the monitor on and off....

 
 
 
Please make sure the following items are included with your monitor. If any items are missing,  contact your dealer. 
 
 
 
 
 Unpacking 
    Option 1 
 
  Moniter & Simple stand  Bottom Hanger 
    Option 2 
 
  Monitor & Pivot stand
 
 
   Manual  
 
Users Guide, Monitor   
SyncMaster 510N / 710N / 910N / 512N / 712N / 912N
SyncMaster 510N / 512N
 

 Quick Setup Guide Warranty Card Dirver, Natural Color 
software, MagicTune™  software CD 
 
 
     Cable
  
D-Sub Cable  Power Cord   
 
 
 
 Front  
 
 
  1. Menu button [ ] 
 
Opens the OSD menu. Also used to exit the OSD menu or return to the 
previous menu.  
2. MagicBright button   [] 
 
 
 
 
MagicBright is a new feature prov iding optimum viewing environment 
depending on the contents of the image you are watching. Currently four 
different modes are available: Custom, Text, Internet, and...

 
 
  
  If this is the case, adjust the 
Brightness and Contrast by using the 
OSD menu. 
3. Brightness button [ ]
When OSD is not on the screen, Push  the button to adjust brightness.
2,3. Adjust buttons [ ]
Adjust items in the menu.
4. Enter button [ ] 
Activate a highlighted menu item.  
5. Auto button Use this button for auto adjustment direct access.
6. Power button  Use this button for turn the monitor on and off.
7. Power indicator    This light glows green duri
ng normal operation, and blinks...

 
1.Connect the power cord for your  monitor to the power port on the back of the monitor. 
Plug the power cord for the mo nitor into a nearby outlet.
2-1. Using the D-sub (Analog) conne ctor on the video card.  
Connect the signal cabl e to the 15-pin, D-sub connector  on the back of your monitor. 
 
2-2. Using the DVI (Digital) conn ector on the video card. 
Connect the DVI Cable to the DVI Port  on the back of your Monitor. 
 
2-3. Connected to  a Macintosh. 
Connect the monitor  to the Macintosh...

 
1.Connect the power cord for your  monitor to the power port on the back of the monitor. 
Plug the power cord for the mo nitor into a nearby outlet.
2-1. Using the D-sub (Analog) conne ctor on the video card.  
Connect the signal cabl e to the 15-pin, D-sub connector  on the back of your monitor. 
 
2-2. Connected to  a Macintosh. 
Connect the monitor  to the Macintosh computer using the D-SUB connection cable.
2-3. In the case of an old model Macintosh, you need to connect the monitor using a special...

1. Monitor and Bottom  
2. Monitor and Hanger   
 
   Pivot Stand 
 
 
   Attaching a base 
    This monitor accepts a 100 mm x 100 mm  VESA-compliant mounting interface pad.
SyncMaster 510T / 510N / 512N
 

 
Simple stand Pivot stand
A.  Monitor  
 
B.  Mounting interface pad  
 
   1. Turn off your monitor and unplug its power cord.   2. Lay the LCD monitor face-down on  a flat surface with a cushion beneath it to protect the screen.  
3.  Remove four screws and then  remove the Stand  from the  LCD monitor.  
4. Align the Mounting Interface Pad  with the holes in the Rear Cover Mounting Pad and secure it with 
 four  screws  that came  with  the  arm-type  base, wall  mount hanger  or  other base....

 
 
5. Monitor driver installation is completed.   
This monitor driver is under certifying MS  logo,and this installation dont damage 
your system.The certified dr iver will be posted on Samsung Monitor Homepage  
http://www.samsung .com/. 
 
 
Windows XP  | Windows 2000  | Windows NT  | Linux   
 
 
When prompted by the operating system for the monitor driver, insert the CD-ROM 
included with this monitor. Driver installation is slightly different from one operating 
system to another. Follow the...

      
 
5. Click  Update Driver..  and select Install from a list or..  then click Next button.  
 
     
 
6. Select  Dont search ,I will..  then click Next and then click  Have disk.  
 
     
 
7. Click the  Browse button then choose  A:(D: Driver) and choose your monitor model in the model \
list and click the  Next button.  
 
     
 
8. If you can see following  Message window, then click the  Continue Anyway button. Then click 
 OK  button.