Samsung SyncMaster 400DX-2 User Manual

							Brightness Sensor 
automatically 
detects  distribution of the inputted visual signal and adjusts
to create optimum brightness.
1. Off
2. On
Sound
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The 

BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
Mode  MENU →   →  → ENTER →   → ENTER → 
→   ,   → ENTER
The LCD Display has a built-in high fidelity stereo amplifier.
1. Standard
Selects Standard for the standard factory settings.
2. Music
Selects Music when watching music videos or concerts.
3. Movie
Selects Movie when viewing movies.
4. Speech
Selects Speech when watching a show that is mostly dialog (i.e., news). Adjusting the LCD Display 
						

							5.
Custom
Selects  Custom 
if 
you want to adjust the settings according to your personal preferences.
Custom  The sound settings can be adjusted to suit your personal preferences.
MENU → 
 →  → ENTER →   → → ENTER → 
 Note
• You can hear the sound even when sound value is set to 0.
•

If you adjust sound using  Custom function, Mode will turn to Custom mode.
Bass MENU →   →  → ENTER →   → → ENTER →  →ENTER→ 
→  ,   → ENTER
Emphasizes low frequency audio.
Treble MENU →   →  → ENTER →   → → ENTER →   →   → ENTER → 
→  ,   → ENTER
Emphasizes high frequency audio.
Balance MENU  →     →   →  
ENTER  →     → →  
ENTER  →     →     →     →  
ENTER  → →  ,   → ENTER
Allows you to Adjusts the sound balance between the left and right speakers.
Auto Volume  MENU →   →  → ENTER →   → → → ENTER → Adjusting the LCD Display 
						

							→   ,   → ENTER
Reduces the difference in volume control between broadcasters.
1. Off
2. On
SRS TS XT  MENU →   →  → ENTER →   → → → → ENTER → 
→   ,   → ENTER
SRS  TS 
XT  is a patented SRS technology that solves the problem of playing 5.1 multichannel
content  over  two  speakers.  TruSurround  XT  delivers  a  compelling,  virtual  surround  sound
experience through any two-speaker playback system, including internal television speakers.
It is fully compatible with all multichannel formats.
1. Off
2. On
Sound Select  MENU →   →   → ENTER →   →   →  →   →   → ENTER → 
→   ,   → ENTER
Selects either Main or Sub when  PIP is On. Note
Available Modes:  PIP ON
1. Main
2. Sub
Speaker Select  MENU →   →   → ENTER →   →   →  →   →   →   → ENTER → Adjusting the LCD Display 
						

							→   ,   → ENTER
When  you 
use the product with it connecting to a Home theater, turn the Internal speakers
off so you can listen to sound from the Home theater's (external) speakers.
1. Internal
Sound  is  outputted  both  from  the  Internal  speaker  and  the External  speakers,  but  the
volume control is only available from the  Internal speaker.
2. External
When sound is only outputted from the  External speakers, the volume control is also only
available from the  External speakers.
Setup
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The 

BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
Language  MENU →   →  →  → ENTER →   → ENTER → 
→   ,   → ENTERAdjusting the LCD Display 
						

							You can choose one of 13 languages.
 Note
The  language 
chosen affects only the language of the OSD. It has no effect on any software
running on the computer.
Time  Selects from one of 4 time settings, Clock Set, Sleep Timer, On Timer, and Off Timer.
MENU → 
 →  →  → ENTER →   →   → ENTER → 
Clock Set
MENU →   →  →  → ENTER →   →   → ENTER →  → ENTER→ 
→   ,   →  ,   → ENTER
Current Time Setting.
Sleep Timer MENU  →     →   →   →  
ENTER  →     →     →  
ENTER  →   →     →  
ENTER → →   ,   → ENTER
Turns the LCD Display off automatically at certain times.
1. Off
2. 30
3. 60
4. 90
5. 120 Adjusting the LCD Display 
						

							6.
150
7. 180
On Timer MENU  →     →   →   →   ENTER  →     →     →   ENTER  →   →   →     →   ENTER →
→   ,   /  ,   → ENTER
Turns  the 
LCD Display on automatically at a preset time. Controls the mode and the volume
level at the time the LCD Display turns on automatically.
Off Timer MENU  →    →   →   →  ENTER  →    →    →  ENTER  →  →  →  →    →  ENTER→
→   ,   /  ,   → ENTER
Turns the LCD Display off automatically at a preset time.
Menu Transparency MENU →   →  →  → ENTER →   →  →   → ENTER → 
→   ,   → ENTER
Change the transparency of the background of the OSD.
1. High Adjusting the LCD Display 
						

							2.
Medium
3. Low
4. Opaque
Safety Lock  Change PIN
MENU  →    →   →   → 
ENTER  →    →  →  →    → 
ENTER  →  → 
ENTER→ → [0∼9] → [0∼9] → [0∼9] → [0∼9]
The password can be changed.
 Note
The preset password for the LCD Display is "0000".
Lock On MENU →
   →  →  → ENTER →   →  →  →   → ENTER →   →   → ENTER
→  → [0∼9] → [0∼9] → [0∼9] → [0∼9]
This 
is 

the  function  that  locks  the  OSD  in  order  to  keep  the  current  settings  or  to  prevent
others from adjusting the settings.
Energy Saving MENU →   →  →  → ENTER →   →  →  →  →   → ENTER → 
→   ,   → ENTERAdjusting the LCD Display 
						

							This feature adjusts the power consumption of the unit in order to save energy.
1.
Off
2. On
Video Wall  A 
Video Wall  is  a set of video screens connected together, so that each screen shows a part
of the whole picture or where the same picture is repeated on each screen.
When the Video Wall is on, you can adjust the Video Wall screen setting.
MENU →   →  →  → ENTER →   →  →  →  →   →   →   → ENTER → 
 Note
When  Video Wall

 is running, the  Auto Adjustment,  Image Lock, and Size functions are not
available.  Video Wall does not operate in  MagicInfo mode.
Video Wall MENU  →    →   →   → 
ENTER  →    →  →  →  →    →    →    → 
ENTER  →  →
ENTER →  →   ,   → ENTER
Turns Off/On the  Video Wall function of the selected display Off/On.
1. Off
2. On
Format MENU →

   →  →  → ENTER →   →  →  →  →   →   →   → ENTER →  → 
→ ENTER → 
→   ,   → ENTER
The Format can be selected to see a divided screen. Adjusting the LCD Display 
						

							1.
Full
Provides a full screen without any margins.
2. Natural
Displays a natural image with the original aspect ratio intact.
Horizontal MENU →
   →  →  → ENTER →   →  →  →  →   →   →   → ENTER →  → 
→   → ENTER → 
→   ,   → ENTER
Sets how many parts the screen should be divided horizontally.
Five adjustment levels: 1, 2, 3, 4, and 5.
Vertical MENU →

   →  →  → ENTER →   →  →  →  →   →   →   → ENTER →  → 
→   →   → ENTER → 
→   ,   → ENTER
Sets how many parts the screen should be divided vertically.
Five adjustment levels: 1, 2, 3, 4, and 5.
Screen Divider MENU →

   →  →  → ENTER →   →  →  →  →   →   →   → ENTER →  → 
→   →   →   → ENTER →  Adjusting the LCD Display 
						

							The screen can be divided into several images. A number of screens can be selected with a
different layout when dividing.
•
Select a mode in Screen Divider.
•
Select a display in Display Selection.
• The selection will be set up by pressing a number in the selected mode.
Safety Screen  The 
Safety  Screen  
 function is used to prevent afterimages that may appear when a still picture
is displayed on the screen over a long time.
• The Safety Screen function scrolls the screen for the specified period of time.
• This function is not available when the power is turned off.
MENU  →     →   →   →  
ENTER  →     →   →   →   →     →     →     →     →  
ENTER  → Pixel Shift
Pixel Shift
MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  → ENTER →  → ENTER →  →   ,   → ENTER
To prevent after-images on the screen, you can use this function to have pixels move on the
LCD in the horizontal or vertical direction.
1.
Off
2. On  Note
The Pixel Shift is not available when  Video Wall is On.
Horizontal MENU →   →  →  → 
ENTER →   →  →  →  →   →   →   →   → 
ENTER →  → ENTER →  →   → ENTER →  →   ,   → ENTERAdjusting the LCD Display