Samsung SyncMaster 400DX-2 User Manual

							Sold separately
Wall Mount KIT RGB to BNC Cable BNC to BNC Cable
(Applicable to the DX-2model only)  
 
Semi Stand KIT   
Your LCD Display
FrontMENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Navigate buttons (Up-Down buttons)
Moves from one menu item to another vertically or adjusts selected menu
values.
Adjust buttons (Left-Right buttons) / Volume buttons
Moves  from  one  menu  item  to  another  horizontally  or  adjusts  selected
menu values. When OSD is not on the screen, press the button to adjust
volume.
ENTER button [ENTER]
Activates a highlighted menu item.
SOURCE button [SOURCE]
Switches from PC mode to Video mode. Selects the input source that an
external device is connected to. Introduction 
						

							[PC] → [
DVI] → [ AV] → [Component] → [ HDMI] → [MagicInfo]  Note
• The  BNC
 mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
PIP button
Push the PIP button to turn the PIP screen On / Off.
More than one PIP cannot overlap on screen as BNC and the component
use the same terminal.
•PC :  DVI / AV / HDMI
• BNC :  DVI / AV / HDMI
• DVI / AV : PC /  BNC
• Component :  PC
• HDMI :  PC / BNC
Power button []
Use this button for turning the LCD Display on and off.
Brightness Sensor (Optional)
Automatically detects the surrounding brightness.  Note
This function  is 

activated only on the models equipped with an auto bright-
ness sensor.
Power indicator
Shows PowerSaver mode by blinking green  Note
See PowerSaver  described in 

the manual for further information regarding
power  saving  functions.  For  energy  conservation,  turn  your  LCD  Display
OFF when it is not needed or when leaving it unattended for long periods.
Remote Control Sensor
Aim the remote control towards this spot on the LCD Display. Rear
 Note
For  detailed  information 

concerning  cable  connections,  refer  to  Connecting  Cables  under
Setup. The LCD Display 's configuration at the back may vary slightly depending on the model. Introduction 
						

							 Note
 Applicable to the DX-2 model only.
 Applicable to the DXN-2 model only. POWER S/W ON [ │ ] / OFF [O]
Switches the LCD Display On/Off.
 POWER
The  power  cord  plugs  into  the  LCD  Display
and the wall outlet.
 
 RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
 
RGB  IN  (PC  Connection  Terminal  (In-
put))
• Use a D-Sub Cable (15 pin D-Sub) - PC
mode (Analog PC)
• Connect the RGB IN port on the monitor to the BNC port on the PC using the RGB
to BNC cable.
 DVI IN (PC Video Connection Terminal)
Use  a  DVI  Cable  (DVI-D  to  DVI-D)  -  DVI
mode (Digital PC)
Introduction 
						

							   DVI/RGB/HDMI  AUDIO  IN  (PC/DVI/
HDMI Audio Connection Terminal (Input))
 AV/COMPONENT AUDIO IN [L- AUDIO-
R]
Connect  the  port  of  the  DVD,  VCR  (DVD  /
DTV Set-Top Box) to the [ L- AUDIO - R ] port
of the LCD Display.
 DVI OUT
• Connect  a  monitor  to  another  monitor
through a DVI cable.
• Connect the DVI OUT port on the monitor to the HDMI IN port on the other monitor
using the DVI to HDMI cable.
• DVI,  HDMI  and  network  signals  sent  via the  DVI  OUT  port  are  displayed  on  the
second display which has the DVI IN port.  Note
Up  to 

6  Full  HD  or  10  HD  monitors  can  be
connected  (May  differ  depending  on  the
product).  
 AV IN [VIDEO]
Connect the [ VIDEO ] terminal of your mon-
itor to the video output terminal of the exter-
nal device using a VIDEO cable.
AUDIO OUT
Headphone/External  speaker  output  termi-
nal.
 
HDMI IN
Connect  the  HDMI  terminal  at  the  back  of
your  LCD  Display  to  the  HDMI  terminal  of
your  digital  output  device  using  a  HDMI  ca-
ble.
Up to HDMI cable 1.0 can be supported.
 Introduction 
						

							 BNC OUT [R, G, B, H, V] (BNC Terminal
(Output))
BNC  (Analog  PC)  Connection:  connecting
the R, G, B, H, V ports.
The  number  of  LCD  Displays  that  can  be
connected to the loopout depends on the ca-
bles, signal source, etc. With cables or signal
source where there is no degradation, up to
10 LCD Displays can be connected (May not
be  supported  depending  on  the  connected
cable).  Note
(Applicable to the DX-2 model only)  
BNC/COMPONENT  IN  [R/Y,  G/P
B,  B/
P R, H, V] (BNC/Component Connection Ter-
minal (input))
During component input, please check spec-
ifications for the input ports below.
[R/Y, G/P B, B/P
R, H, V]
• [R/Y] --> Red port input
• [G/P B] --> Green port input
• [B/P R] --> Blue port input  Note
Applicable to the DX-2 model only.  
 RGB OUT
 Note
Applicable to the DXN-2 model only.
 LAN (LAN Connection Terminal)  Note
Applicable to the DXN-2 model only.  
USB1,USB2 (USB Connection Terminal)
Keyboard  /  Mouse,  Mass  Storage  Device
Compatible.
 Note
Applicable to the DXN-2 model only.
Introduction 
						

							 Kensington Lock
The  Kensington  Lock  is  a  device  used  to
physically  fix  the  system  when  using  it  in  a
public  place.  The  locking  device  has  to  be
purchased separately. The appearance and
locking  method  may  differ  from  the  illustra-
tion depending on the manufacturer. Refer to
the  manual  provided  with  the  Kensington
Lock for proper use. The locking device has
to be purchased separately.
 Note
The location of the Kensington Lock may be
different depending on the model.
Using the 

Anti-Theft Kensington Lock
1. Insert  the  locking  device  into  the  Ken- sington slot on the LCD Display  and
turn it in the locking direction  .
2. Connect the Kensington Lock cable.
3.

Fix  the  Kensington  Lock  to  a  desk  or  a
heavy stationary object.  Note
See Connecting Cables  for further information regarding cable connections.
Remote Control  Note
The performance 
 of the remote control may be affected by a TV or other electronic device
operating near the LCD Display , causing a malfunction due to interference with the frequen-
cy. Introduction 
						

							 POWER
OFF
Number Buttons
DEL   / GUIDE button
+ VOL -
 SOURCE
 D.MENU
TOOLS
Up-Down Left-Right buttons
 INFO
COLOR BUTTONS
 TTX/MIX
MTS/DUAL
 ENTER/PRE-CH
 MUTE
 CH/P 
TV
 MENU
 RETURN
 EXIT
MagicInfo
1.   POWER
Turns the product On.
2.   OFF
Turns the product Off.
3. Number Buttons Press to change the channel.
4. 
DEL    /  GUIDE  but-
ton The "-" button is used to select Digital channels.
Electronic Program Guide (EPG) display.
- This function does not work for this LCD Display.
5. + VOL - Adjusts the audio volume.
6.   SOURCE
Press the button to change the input signal SOURCE.
Changing 
the 

SOURCE is only allowed for external devices
that are connected to the LCD Display at the time.
7.   D.MENU
DTV menu display
- This function does not work for this LCD Display.
8. TOOLS Use to quickly select frequently used functions.Introduction 
						

							- This function does not work for this LCD Display.
9.  Up-Down 
Left-Right  but-
tons Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
10.   INFO
Current  picture 
 information  is  displayed  on  the  upper  left
corner of the screen.
11. COLOR BUTTONS Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu.
- This function does not work for this LCD Display.
12.   TTX/MIX
TV 
channels 
 provide  written  information  services  via  tele-
text.
- Teletext Buttons - This function does not work for this LCD Display.
13. MTS/DUAL - This function does not work for this LCD Display.
MTS-
You can select MTS (Multichannel Television Stereo) mode.
Audio Type MTS/S_Mode Default
FM Stereo Mono Mono Manual
Change
Stereo Mono ↔ Stereo
SAP Mono ↔ SAP Mono
DUAL-
STEREO/MONO,  DUAL  l  /  DUAL  ll  and  MONO/NICAM
MONO/NICAM STEREO can be operated depending on the
broadcasting type by using the DUAL button on the remote
control while watching TV.
14.   ENTER/PRE-CH
This 
button 
 is  used  to  return  to  the  immediately  previous
channel.
- This function does not work for this LCD Display.
15.   MUTE
Pauses 
(mutes) 
 the  audio  output  temporarily.  This  is  dis-
played  on  the  lower  left  corner  of  the  screen.  The  audio
comes back on if MUTE or - VOL + is pressed in the Mute
mode.
16.   CH/P  In TV mode, selects TV channels.
- This function does not work for this LCD Display.
17. TV Selects the TV mode directly.
- This function does not work for this LCD Display.
18.   MENU
Opens the 
 on-screen  menu  and  exits  from  the  menu  or
closes the adjustment menu. Introduction 
						

							19.   RETURN
Returns to the previous menu.
20.   EXIT
Exits from the menu screen.
21. MagicInfo MagicInfo Quick Launch Button.Introduction 
						

							Connections
Connecting a Computer
(400DXN-2,460DXN-2) (400DX-2,460DX-2)
There are several ways to connect the computer to the monitor. Choose
one from the following options.
   Using the D-sub (Analog) connector on the video card.
• Connect  the  D-sub  to 
the  15-pin,  RGB  port  on  the  back  of  your  LCD
Display and the 15 pin D-sub Port on the computer.