Samsung SyncMaster 400DX-2 User Manual

							Adjusting the LCD Display
Input
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The 
BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
Source List  MENU → ENTER →   → ENTER → 
→   ,   → ENTER
Use to select  PC, DVI  or 

other external input sources connected to the LCD Display. Use to
select the screen of your choice.
1. PC
2. DVI
3. AV
4. Component
5. HDMI
6. MagicInfo
PIP  Note
Available Modes:  PIP ON 
						

							When external AV devices such as VCRs or DVDs are connected to the LCD Display , 
PIP
allows  you to 
watch video from those devices in a small window super-imposed on the PC
Video signal. ( Off/On)
MENU → ENTER →   →   → ENTER → 
 Note
• More than  one PIP

 cannot be overlapped on screen as  BNC and the Component use the
same terminal.
• If you select  ,   ,   in Size, Position and Transparency will not be activated.
PIP MENU → ENTER →   →   → ENTER →   → ENTER → 
→   ,   → ENTER
Turns the PIP Screen Off/On.
• Off
• On
Source MENU → ENTER →   →   →ENTER →   →   →ENTER → 
→   ,   → ENTER
Selects the input source for the PIP.
• PC :  DVI / AV / HDMI
• BNC :  DVI / AV / HDMI
• DVI / AV : PC /  BNC
• Component :  PC
• HDMI :  PC / BNC Adjusting the LCD Display 
						

							Swap
MENU → ENTER →   →   →ENTER →   →  →   →ENTER → 
Swaps the contents of the PIP and main image.
The 
image 
in the PIP window will appear on the main screen, and the main screen image will
appear in the PIP window.
Size MENU → ENTER →   →   →ENTER →   →   →   →   → ENTER → 
→   ,   → ENTER
Changes the Size of the PIP window.
Position MENU → ENTER →   →   →ENTER →   →   →   →   →   → ENTER → 
→   ,   → ENTER
Changes the Position of the PIP window.
Transparency MENU  → ENTER 

→    →    →  ENTER  →    →    →    →    →    →    →  ENTER  →Adjusting the LCD Display 
						

							→   ,   → ENTER
Adjusts the Transparency of PIP windows.
• High
• Medium
• Low
• Opaque  Note
• PIP turns off when the LCD Display is switched to an external source.
• For 
PC and DVI, this is deactivated if the cable is disconnected.
Edit Name MENU → ENTER →   → ENTER →   →   → 
→   ,   → ENTER
Name  the 

input  device  connected  to  the  input  jacks  to  make  your  input  source  selection
easier.
VCR /  DVD / Cable STB /  HD STB / Satellite STB /  AV Receiver / DVD Receiver /  Game /
Camcorder /  DVD Combo /  DHR / PC / BNC / HDMI /  Component /  AV / DVI  Note
• The displayed devices differ depending on the external input mode.
•

When connecting a PC to the HDMI or DVI terminal, set  Edit Name to PC. In other cases,
set  Edit Name  to AV. However, since 640x480, 720P (1280x720), and 1080p (1920x1080)
are common signals for  AV and PC, make sure to set the  Edit Name in accordance with
the input signal.
• The Picture menu changes depending on the input signal and  Edit Name.
Adjusting the LCD Display 
						

							Picture [PC / DVI / BNC / MagicInfo Mode]
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The  BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
MagicBright  MENU →   → ENTER →   → ENTER → 
→   ,   → ENTER
MagicBright  is 

a feature providing the optimum viewing environment depending on the con-
tents of the image you are watching. Currently four different modes are available:  Entertain,
Internet, Text and Custom. Each mode has its own pre-configured brightness value.
(Not available when  Dynamic Contrast is set to  On.)
1. Entertain
High brightness
For watching motion pictures such as from a DVD or VCR.
2. Internet
Medium brightness
For working with a mixture of images such as texts and graphics.
3. Text
Normal brightness
For documents or works involving heavy text.
4. Custom Adjusting the LCD Display 
						

							Although  the  values  are  carefully  chosen  by  our  engineers,  the  pre-configured  values
may not be comfortable to your eyes depending on your taste.
If this is the case, adjust the brightness and contrast by using the OSD menu.
Custom  By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
MENU → 
 → ENTER →   →   → ENTER → 
(Not available when 
Dynamic Contrast is set to  On.)  Note
By  adjusting 
the picture using the  Custom function, MagicBright will change to  Custom mode.
Contrast MENU →   → ENTER →   →   → ENTER →  → ENTER→ 
→  ,   → ENTER
Adjusts the Contrast.
Brightness MENU →   → ENTER →   →   → ENTER →   →   → ENTER → 
→  ,   → ENTER
Adjusts the Brightness.
Sharpness MENU  →     →  
ENTER  →     →     →  
ENTER  →     →     →     →  
ENTER  → →  ,   → ENTER
Adjusts the Sharpness.
Color Tone  MENU →   → ENTER →   →   →   →ENTER → Adjusting the LCD Display 
						

							→   ,   → ENTER
The color tones can be changed.
(Not available when  Dynamic Contrast is set to  On.)
1. Off
2. Cool
3. Normal
4. Warm
5. Custom  Note
If  you 
set  the  Color  Tone  to  Cool, Normal,  Warm,  or  Custom,  the  Color  Temp.  function  is
disabled.
If you set the  Color Tone to Off, the Color Control function is disabled
Color Control  Adjusts individual Red, Green, Blue color balance.
MENU → 
 → ENTER →   →   →   → → ENTER → 
(Not available when 
Dynamic Contrast is set to  On.)  Note
If you adjust the picture by using the  Color Control function, Color Tone  will turn to the  Cus-
tom mode.
Red MENU  →    → 
ENTER  →    →    →    →   → 
ENTER  →  → 
ENTER  → →  ,   → ENTER
Green MENU →

   → 
ENTER →   →   →   →  → 
ENTER →  →   → 
ENTER → →  ,   → ENTER
Blue MENU →

   → ENTER →   →   →   →  → ENTER →  →   →   → ENTER
→  Adjusting the LCD Display 
						

							→  ,   → ENTER
Color Temp.  MENU →   → ENTER →   →   →   →   →  → ENTER → 
→  ,   → ENTER
Color Temp. is a measure of the 'warmth' of the image colors.
(Not available when  Dynamic Contrast is set to  On.)  Note
This function is only enabled if the  Color Tone is set to Off.
Image Lock  Image Lock
 is  used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the Coarse adjustment and then use Fine again.
(Available in  PC mode only)
MENU →   → ENTER →   →   →   →   →  →  → ENTER → 
Coarse
MENU →

   → ENTER →   →   →   →   →  →  → ENTER →   → ENTER →
→  ,   → ENTER
Removes  noise 
 such  as  vertical  stripes.  Coarse  adjustment  may  move  the  screen  image
area. You may relocate it to the center using the horizontal control menu.
Fine MENU →   → 
ENTER →   →   →   →  →  →   → 
ENTER →  →   → ENTER
→  →  ,   → ENTER
Removes  noise 

such as horizontal stripes. If the noise persists even after Fine tuning, repeat
it after adjusting the frequency (clock speed).
Position MENU  →    → 
ENTER  →    →    →    →   →   →    → 
ENTER  →  →    →    →
ENTER →  Adjusting the LCD Display 
						

							→   ,   ,   ,   → ENTER
Adjusts the screen location horizontally and vertically.
Auto Adjustment  MENU →   → ENTER →   →   →   →   →   →  →  → ENTER → 
The values of 
Fine, Coarse,  Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in  PC mode only)
Signal Balance  This is used to make up for the weak RGB signal transmitted by a long signal cable.
MENU → 
 → ENTER →   →   →   →   →   →  →  →  → ENTER → 
(Available in 
PC mode only)
Signal Balance MENU →
   → ENTER →   →   →   →   →  → →   →  → ENTER →  →
ENTER →  →   ,   → ENTER
Selects either On or Off with the signal control.
Signal Control MENU →

   → 
ENTER →   →  →   →   →   →  → →  → 
ENTER →  →
ENTER →   → 
1.
R-Gain Adjusting the LCD Display 
						

							MENU  →     →  
ENTER  →     →     →     →     →   → →   →   →  
ENTER  →  → ENTER →   →   → ENTER → 
→  ,   → ENTER
2. G-Gain
MENU  →     →  
ENTER  →     →     →     →     →   → →   →   →  
ENTER  →  → ENTER →  →   →   → ENTER→ 
→  ,   → ENTER
3. B-Gain
MENU  →
   → 
ENTER →   →   →   →   →  → →  →  → 
ENTER →  → ENTER →  →   →   →   → ENTER→ 
→  ,   → ENTER
4. R-Offset
MENU  →

   → 
ENTER →   →   →   →   →  → →  →  → 
ENTER →  → ENTER →  →   →  →   →   → ENTER→ 
→  ,   → ENTER
5. G-Offset
MENU  →

   → 
ENTER →   →   →   →   →  → →  →  → 
ENTER →  → ENTER →  →   →   →   →   →   → ENTER→ 
→  ,   → ENTER
6. B-Offset
MENU  →

   → 
ENTER →   →   →   →   →  → →  →  → 
ENTER →  → ENTER →  →   →  →   →   →   →   → ENTER → 
→  ,   → ENTER
Size  MENU →   → ENTER →   →   →   →   →  → →  →  →  → ENTER → Adjusting the LCD Display