Samsung SyncMaster 400DX-2 User Manual

							→   ,   → ENTER
The Size can be switched.
1. 16:9
2. 4:3
HDMI Black Level  MENU →   → ENTER →   →   →   →   →  →  →  → ENTER → 
→   ,   → ENTER
When  watching 
with a DVD or set-top box connecting to the product via HDMI or DVI, image
quality  deterioration  (black  level,  lower-quality  contrast,  lighter  color  tone,  etc.)  may  occur
depending on the connected external device.
1. Normal
2. Low  Note
• For  Timing 

which can be used for both the PC and the DTV in  DVI, HDMI mode,  HDMI
Black Level will be activated.
PIP Picture MENU →   → ENTER →   →   →   →   →  → →  →  →  →  → ENTER → 
→   ,   → ENTER
Adjusts the PIP Screen Settings.  Note
• Available Modes:  PIP ON
1. Contrast Adjusting the LCD Display 
						

							MENU  →    → 
ENTER  →    →    →    →    →   → →  →  →  →  → 
ENTER  →  → ENTER→ 
→  ,   → ENTER
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
MENU  →    → 
ENTER  →    →    →    →    →   → →  →  →  →  → 
ENTER  →  →  → ENTER → 
→  ,   → ENTER
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
MENU  →    → 
ENTER  →    →    →    →    →   → →  →  →  →  → 
ENTER  →  →  →  → ENTER → 
→  ,   → ENTER
Adjusts the Sharpness of the PIP window on the screen.
4. Color
MENU  →    → 
ENTER  →    →    →    →    →   → →  →  →  →  → 
ENTER  →  →  →  →  → ENTER → 
→  ,   → ENTER
Adjusts the Color of the PIP window on the screen.  Note
Enabled only when the  PIP input is selected in AV, HDMI or Component mode.
5. Tint
MENU  →    → 
ENTER  →    →    →    →    →   → →  →  →  →  → 
ENTER  →  →  →  →  →  → ENTER → 
→  ,   → ENTER
Adds a natural tone to the PIP window. Adjusting the LCD Display 
						

							 Note
Enabled  only 
when the PIP input is selected in  AV, HDMI or  Component mode. Operates
only if the video signal is NTSC.
Dynamic Contrast  MENU  →     →  
ENTER  →     →     →     →     →   → →   →   →   →   →   →  
ENTER  → →   ,   → ENTER
Dynamic  Contrast 

automatically  detects  the  distribution  of  the  visual  signal  and  adjusts  to
create an optimum contrast.
1. Off
2. On
Lamp Control  MENU  →    →  ENTER  →    →    →    →    →   → →  →  →  →  →  →  →  ENTER  →
→  ,   → ENTER
Adjusts the inverter lamp in order to reduce energy consumption.  Note
This  function 

does not operate when  Dynamic Contrast is set to On in PC, DVI,  AV, HDMI,
Component or MagicInfo modes. ( MagicInfo : Applicable to the DXN-2 model only. )
Brightness Sensor  MENU →   → 
ENTER →   →   →   →   →  → →  →  →  →  →  →  →  → 
ENTER → →   ,   → ENTER
Brightness  Sensor automatically 

detects distribution of the inputted visual signal and adjusts
to create optimum brightness. Adjusting the LCD Display 
						

							1.
Off
2. On
Picture [ AV / HDMI / Component Mode]
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The  BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
Mode  MENU →   → ENTER →   → ENTER → 
→   ,   → ENTER
The  LCD 

Display  has  four  automatic  picture  settings  (" Dynamic",  "Standard",  "Movie"  and
"Custom") that are preset at the factory.
Dynamic, Standard, Movie, or Custom can be activated.
(Not available when  Dynamic Contrast is set to  On.)
1. Dynamic
2. Standard
3. Movie
4. Custom
Custom  By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
MENU → 
 → ENTER →   →   → ENTER → Adjusting the LCD Display 
						

							(Not available when 
Dynamic Contrast is set to  On.)
Contrast MENU →   → ENTER →   →   → ENTER →   → ENTER→ 
→  ,   → ENTER
Adjusts the Contrast.
Brightness MENU →   → ENTER →   →   → ENTER →   →   → ENTER → 
→  ,   → ENTER
Adjusts the Brightness.
Sharpness MENU  →     →   ENTER  →     →     →   ENTER  →     →     →     →   ENTER  →
→  ,   → ENTER
Adjusts the picture Sharpness.
Color MENU  →    → 
ENTER  →    →    → 
ENTER  →    →    →    →    → 
ENTER  → →  ,   → ENTER
Adjusts the picture Color.
Tint MENU  →    → 
ENTER  →    →    → 
ENTER  →    →    →    →  →  → 
ENTER  → →  ,   → ENTER
Adds a natural tone to the display.
Color Tone  MENU →   → ENTER →   →   →   → ENTER → Adjusting the LCD Display 
						

							→   ,   → ENTER
The  color 
tones can be changed. The individual Color components are also user adjustable.
(Not available when  Dynamic Contrast is set to  On.)
1. Off
2. Cool2
3. Cool1
4. Normal
5. Warm1
6. Warm2  Note
If  you 

set the  Color Tone  to Cool2,  Cool1, Normal,  Warm1, or  Warm2, the  Color Temp.  func-
tion is disabled.
Color Temp.  MENU →   → ENTER →   →   →  →  → ENTER → 
→  ,   → ENTER
Color temp. is a measure of the 'warmth' of the image colors.
(Not available when  Dynamic Contrast is set to  On.)  Note
This function is only enabled if the  Color Tone is set to Off.
Size  MENU →   → ENTER →   →   →   →   →  → ENTER → Adjusting the LCD Display 
						

							→   ,   → ENTER
The Size can be switched.
1. 16:9: Sets the picture to 16:9 wide mode.
2. Zoom 1: Magnifies the size of the picture on the screen.
3. Zoom 2: Magnifies the size of the picture more than  Zoom 1.
4. 4:3: Sets the picture to 4:3 normal mode.
5. Screen Fit : 
Displays 
the input scenes as they are without any cutoff when HDMI 720p,
1080i, 1080p signals are input.
(Not available when  Dynamic Contrast is set to  On.)  Note
• Certain  external 

devices may feed the display an out of spec signal that may cause cutoff
even when using the  Screen Fit feature.
• Zoom 1,  Zoom 2 are unavailable in  HDMI mode.
• The Position and Reset functions are available in   Zoom 1 or  Zoom 2 modes.
Digital NR (Digital Noise Reduction)  MENU →   → ENTER →   →   →   →   →  →  → ENTER → 
→   ,   → ENTER
Turns  the 

Digital Noise Reduction feature  Off/On. The Digital Noise Reduction feature allows
you to enjoy clearer and crisper images.
1. Off
2. On  Note
Digital NR function is not available for all resolutions.
HDMI Black Level  MENU →   → ENTER →   →   →   →   →  →  →  → ENTER → Adjusting the LCD Display 
						

							→   ,   → ENTER
When  a 
DVD or set-top box is connected to your TV via HDMI or DVI, it may cause a deg-
radation  in  the  screen  quality,  such  as  an  increase  in  the  black  level,  a  low  contrast,  or
discoloration,  etc.,  depending  on  the  external  device  connected.  In  this  case,  adjust  the
screen quality of your TV by configuring the  HDMI black level.
1. Normal
2. Low  Note
For  Timing 

which can be used for both the PC and the DTV in  DVI, HDMI mode,  HDMI Black
Level will be activated.
Film Mode  MENU →   → ENTER →   →   →   →   →   →   →   →   → ENTER → 
→   ,   → ENTER
The Film Mode feature offers you a theater-quality viewing experience.
In  HDMI 
mode, 

this  function  is  available  when  the  input  signal  is  interlaced  scan;  it  is  not
available in progressive scan.
1. Off
2. On
PIP Picture MENU →   → ENTER →   →   →   →   →   →   →   →   →   → ENTER → 
→   ,   → ENTER
Adjusts the PIP Screen Settings. Adjusting the LCD Display 
						

							 Note
• Available Modes:  PIP ON
1. Contrast
MENU 
→   → 
ENTER →   →   →   →   →   →   →   →   →   → 
ENTER →  → ENTER→ 
→  ,   → ENTER
Adjusts the Contrast of the PIP window on the screen.
2. Brightness
MENU →   → 
ENTER →   →   →   →   →   →   →   →   →   → 
ENTER →  →  → ENTER→ 
→  ,   → ENTER
Adjusts the Brightness of the PIP window on the screen.
3. Sharpness
MENU →   → 
ENTER →   →   →   →   →   →   →   →   →   → 
ENTER →  →  →  → ENTER→ 
→  ,   → ENTER
Adjusts the Sharpness of the PIP window on the screen.
4. Color
MENU →   → ENTER →   →   →   →   →   →   →   →   →   → ENTER → 
→  →  →  → ENTER→ 
→  ,   → ENTER
Adjusts the Color of the PIP window on the screen.  Note
Enabled only when the  PIP input is selected in AV, HDMI or Component mode.
5. Tint
MENU →   → 
ENTER →   →   →   →   →   →   →   →   →   → 
ENTER →  →  →  →  →  → ENTER→  Adjusting the LCD Display 
						

							→  ,   → ENTER
Adds a natural tone to the PIP window.  Note
Enabled  only 
when the PIP input is selected in  AV, HDMI or  Component mode. Operates
only if the video signal is NTSC.
Dynamic Contrast  MENU  →     →  
ENTER  →     →     →     →     →     →   →   →   →     →   →  
ENTER  → →   ,   → ENTER
Dynamic  Contrast 
 automatically  detects  the  distribution  of  the  visual  signal  and  adjusts  to
create an optimum contrast.
1. Off
2. On
Lamp Control  MENU  →    → 
ENTER  →    →    →    →    →   →   →   →   →   →    →    → 
ENTER  → →  ,   → ENTER
Adjusts the inverter lamp in order to reduce energy consumption.  Note
This function 
 does not operate when  Dynamic Contrast is set to On in PC, DVI,  AV, HDMI,
Component or MagicInfo modes. ( MagicInfo : Applicable to the DXN-2 model only. )
Brightness Sensor  MENU  →    → 
ENTER  →    →    →    →    →   →   →   →   →   →   →    →    → 
ENTER  → →   ,   → ENTERAdjusting the LCD Display