Samsung SyncMaster 400DX-2 User Manual

Adjusting the LCD Display
Input
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The 
BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
Source List  MENU → ENTER →   → ENTER → 
→   ,   → ENTER
Use to select  PC, DVI  or 

other external input sources connected to the LCD Display. Use to
select the screen of your choice.
1. PC
2. DVI
3. AV
4. Component
5. HDMI
6. MagicInfo
PIP  Note
Available Modes:  PIP ON 

When external AV devices such as VCRs or DVDs are connected to the LCD Display , 
PIP
allows  you to 
watch video from those devices in a small window super-imposed on the PC
Video signal. ( Off/On)
MENU → ENTER →   →   → ENTER → 
 Note
• More than  one PIP

 cannot be overlapped on screen as  BNC and the Component use the
same terminal.
• If you select  ,   ,   in Size, Position and Transparency will not be activated.
PIP MENU → ENTER →   →   → ENTER →   → ENTER → 
→   ,   → ENTER
Turns the PIP Screen...

Swap
MENU → ENTER →   →   →ENTER →   →  →   →ENTER → 
Swaps the contents of the PIP and main image.
The 
image 
in the PIP window will appear on the main screen, and the main screen image will
appear in the PIP window.
Size MENU → ENTER →   →   →ENTER →   →   →   →   → ENTER → 
→   ,   → ENTER
Changes the Size of the PIP window.
Position MENU → ENTER →   →   →ENTER →   →   →   →   →   → ENTER → 
→   ,   → ENTER
Changes the Position of the PIP window.
Transparency MENU  → ENTER 

→    →    →  ENTER  →...

→   ,   → ENTER
Adjusts the Transparency of PIP windows.
• High
• Medium
• Low
• Opaque  Note
• PIP turns off when the LCD Display is switched to an external source.
• For 
PC and DVI, this is deactivated if the cable is disconnected.
Edit Name MENU → ENTER →   → ENTER →   →   → 
→   ,   → ENTER
Name  the 

input  device  connected  to  the  input  jacks  to  make  your  input  source  selection
easier.
VCR /  DVD / Cable STB /  HD STB / Satellite STB /  AV Receiver / DVD Receiver /  Game /
Camcorder /...

Picture [PC / DVI / BNC / MagicInfo Mode]
Available Modes
•  
PC / DVI / BNC
•  
AV
•  
Component
•  
HDMI
•  
MagicInfo  Note
• The  BNC mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
MagicBright  MENU →   → ENTER →   → ENTER → 
→   ,   → ENTER
MagicBright  is 

a feature providing the optimum viewing environment depending on the con-
tents of the image you are watching. Currently four different modes are available:  Entertain,
Internet, Text and Custom. Each...

Although  the  values  are  carefully  chosen  by  our  engineers,  the  pre-configured  values
may not be comfortable to your eyes depending on your taste.
If this is the case, adjust the brightness and contrast by using the OSD menu.
Custom  By using the on-screen menus, the contrast and brightness can be changed to your personal
preference.
MENU → 
 → ENTER →   →   → ENTER → 
(Not available when 
Dynamic Contrast is set to  On.)  Note
By  adjusting 
the picture using the  Custom function, MagicBright...

→   ,   → ENTER
The color tones can be changed.
(Not available when  Dynamic Contrast is set to  On.)
1. Off
2. Cool
3. Normal
4. Warm
5. Custom  Note
If  you 
set  the  Color  Tone  to  Cool, Normal,  Warm,  or  Custom,  the  Color  Temp.  function  is
disabled.
If you set the  Color Tone to Off, the Color Control function is disabled
Color Control  Adjusts individual Red, Green, Blue color balance.
MENU → 
 → ENTER →   →   →   → → ENTER → 
(Not available when 
Dynamic Contrast is set to  On.)  Note
If...

→  ,   → ENTER
Color Temp.  MENU →   → ENTER →   →   →   →   →  → ENTER → 
→  ,   → ENTER
Color Temp. is a measure of the 'warmth' of the image colors.
(Not available when  Dynamic Contrast is set to  On.)  Note
This function is only enabled if the  Color Tone is set to Off.
Image Lock  Image Lock
 is  used to fine-tune and get the best image by removing noise that creates un-
stable images with jitters and shakiness. If satisfactory results are not obtained using the Fine
adjustment, use the...

→   ,   ,   ,   → ENTER
Adjusts the screen location horizontally and vertically.
Auto Adjustment  MENU →   → ENTER →   →   →   →   →   →  →  → ENTER → 
The values of 
Fine, Coarse,  Position are adjusted automatically. By changing the resolution
in the control panel, the auto function is performed.
(Available in  PC mode only)
Signal Balance  This is used to make up for the weak RGB signal transmitted by a long signal cable.
MENU → 
 → ENTER →   →   →   →   →   →  →  →  → ENTER → 
(Available in 
PC mode...

MENU  →     →  
ENTER  →     →     →     →     →   → →   →   →  
ENTER  →  → ENTER →   →   → ENTER → 
→  ,   → ENTER
2. G-Gain
MENU  →     →  
ENTER  →     →     →     →     →   → →   →   →  
ENTER  →  → ENTER →  →   →   → ENTER→ 
→  ,   → ENTER
3. B-Gain
MENU  →
   → 
ENTER →   →   →   →   →  → →  →  → 
ENTER →  → ENTER →  →   →   →   → ENTER→ 
→  ,   → ENTER
4. R-Offset
MENU  →

   → 
ENTER →   →   →   →   →  → →  →  → 
ENTER →  → ENTER →  →   →  →   →   → ENTER→ 
→  ,   → ENTER
5. G-Offset
MENU  →...