Samsung SyncMaster 400DX-2 User Manual

Sold separately
Wall Mount KIT RGB to BNC Cable BNC to BNC Cable
(Applicable to the DX-2model only)  
 
Semi Stand KIT   
Your LCD Display
FrontMENU button [MENU]
Opens the on-screen menu and exits from the menu. Also use to exit the
OSD menu or return to the previous menu.
Navigate buttons (Up-Down buttons)
Moves from one menu item to another vertically or adjusts selected menu
values.
Adjust buttons (Left-Right buttons) / Volume buttons
Moves  from  one  menu  item  to  another  horizontally  or...

[PC] → [
DVI] → [ AV] → [Component] → [ HDMI] → [MagicInfo]  Note
• The  BNC
 mode will not be activated on the DXN-2 model.
• MagicInfo supports the DXN-2 model only.
PIP button
Push the PIP button to turn the PIP screen On / Off.
More than one PIP cannot overlap on screen as BNC and the component
use the same terminal.
•PC :  DVI / AV / HDMI
• BNC :  DVI / AV / HDMI
• DVI / AV : PC /  BNC
• Component :  PC
• HDMI :  PC / BNC
Power button []
Use this button for turning the LCD Display on and off....

 Note
 Applicable to the DX-2 model only.
 Applicable to the DXN-2 model only. POWER S/W ON [ │ ] / OFF [O]
Switches the LCD Display On/Off.
 POWER
The  power  cord  plugs  into  the  LCD  Display
and the wall outlet.
 
 RS232C OUT/IN (RS232C Serial PORT)
MDC(Multiple Display Control) Program Port
 
RGB  IN  (PC  Connection  Terminal  (In-
put))
• Use a D-Sub Cable (15 pin D-Sub) - PC
mode (Analog PC)
• Connect the RGB IN port on the monitor to the BNC port on the PC using the RGB
to BNC cable.
 DVI IN...

   DVI/RGB/HDMI  AUDIO  IN  (PC/DVI/
HDMI Audio Connection Terminal (Input))
 AV/COMPONENT AUDIO IN [L- AUDIO-
R]
Connect  the  port  of  the  DVD,  VCR  (DVD  /
DTV Set-Top Box) to the [ L- AUDIO - R ] port
of the LCD Display.
 DVI OUT
• Connect  a  monitor  to  another  monitor
through a DVI cable.
• Connect the DVI OUT port on the monitor to the HDMI IN port on the other monitor
using the DVI to HDMI cable.
• DVI,  HDMI  and  network  signals  sent  via the  DVI  OUT  port  are  displayed  on  the...

 BNC OUT [R, G, B, H, V] (BNC Terminal
(Output))
BNC  (Analog  PC)  Connection:  connecting
the R, G, B, H, V ports.
The  number  of  LCD  Displays  that  can  be
connected to the loopout depends on the ca-
bles, signal source, etc. With cables or signal
source where there is no degradation, up to
10 LCD Displays can be connected (May not
be  supported  depending  on  the  connected
cable).  Note
(Applicable to the DX-2 model only)  
BNC/COMPONENT  IN  [R/Y,  G/P
B,  B/
P R, H, V] (BNC/Component...

 Kensington Lock
The  Kensington  Lock  is  a  device  used  to
physically  fix  the  system  when  using  it  in  a
public  place.  The  locking  device  has  to  be
purchased separately. The appearance and
locking  method  may  differ  from  the  illustra-
tion depending on the manufacturer. Refer to
the  manual  provided  with  the  Kensington
Lock for proper use. The locking device has
to be purchased separately.
 Note
The location of the Kensington Lock may be
different depending on the model.
Using...

 POWER
OFF
Number Buttons
DEL   / GUIDE button
+ VOL -
 SOURCE
 D.MENU
TOOLS
Up-Down Left-Right buttons
 INFO
COLOR BUTTONS
 TTX/MIX
MTS/DUAL
 ENTER/PRE-CH
 MUTE
 CH/P 
TV
 MENU
 RETURN
 EXIT
MagicInfo
1.   POWER
Turns the product On.
2.   OFF
Turns the product Off.
3. Number Buttons Press to change the channel.
4. 
DEL    /  GUIDE  but-
ton The "-" button is used to select Digital channels.
Electronic Program Guide (EPG) display.
- This function does not work for this LCD Display.
5. + VOL -...

- This function does not work for this LCD Display.
9.  Up-Down 
Left-Right  but-
tons Moves from one menu item to another horizontally, vertically
or adjusts selected menu values.
10.   INFO
Current  picture 
 information  is  displayed  on  the  upper  left
corner of the screen.
11. COLOR BUTTONS Press to add or delete channels and to store channels to the favorite channel list in the “Channel List” menu.
- This function does not work for this LCD Display.
12.   TTX/MIX
TV 
channels 
 provide  written...

19.   RETURN
Returns to the previous menu.
20.   EXIT
Exits from the menu screen.
21. MagicInfo MagicInfo Quick Launch Button.Introduction 

Connections
Connecting a Computer
(400DXN-2,460DXN-2) (400DX-2,460DX-2)
There are several ways to connect the computer to the monitor. Choose
one from the following options.
   Using the D-sub (Analog) connector on the video card.
• Connect  the  D-sub  to 
the  15-pin,  RGB  port  on  the  back  of  your  LCD
Display and the 15 pin D-sub Port on the computer.