Samsung SyncMaster 400DX-2 User Manual

If  the  message  "Windows  needs..."  is  displayed,  as  shown  in  the  figure  below,  click
"Continue".
 Note
This  monitor 
driver is under certifying MS logo, and this installation will not damage your
system.
The certified driver will be posted on Samsung Monitor homepage.
6. Click "Update Driver..." in the "Driver" tab. 7. Check 
the 
 "Browse  my  computer  for  driver  software"  checkbox  and  click  "Let  me  pick
from a list of device drivers on...

9. Select 
the model that matches your monitor from the list of monitor models on the screen,
and click "Next".  
10. Click "Close" → "Close" → "OK" →  "OK"  on the following screens displayed in sequence.Microsoft
®
 Windows ®
 XP Operating System Using the Software 

1. Insert CD into the CD-ROM drive.
2.
Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...".
4. Click the "Properties" button on the "Monitor" tab and select "Driver" tab.
5. Click "Update Driver..." and select "Install from a list or..." then click "Next" button.
6. Select "Don't search, I...

7. Click 
the "Browse" button then choose A:(D:\Driver) and choose your monitor model in
the model list and click the "Next" button. 8. If 
you can see the following message window, then click the "Continue Anyway" button.
Then click "OK" button.  
 Note
This  monitor 
driver  is  certified  by  Microsoft,,  and  this  installation  will  not  damage  your
system.
The certified driver will be posted on Samsung Monitor homepage.
http://www.samsung.com/
9. Click the...

 
10. Monitor driver installation is completed.
Microsoft ®
 Windows ®
 2000 Operating System
When you can see "Digital Signature Not Found" on your monitor, follow these steps.
1. Choose "OK" button on the "Insert disk" window.
2.
Click the "Browse" button on the "File Needed" window.
3. Choose A:(D:\Driver), then click the "Open" button and then click "OK" button.
How to install
1. Click "Start", "Setting", "Control...

4. Select the "Monitor" tab.
5.
Click the "Change" button in the "Monitor Type" area.
6.
Choose "Specify the location of the driver".
7. Choose "Display a list of all the driver in a specific location...", then click "Next" button.
8. Click the "Have Disk" button.
9. Specify A:\(D:\driver), then click "OK" button.
10. Select "Show all devices" and choose the monitor that corresponds to the one you con- nected to your computer and...

10. You 
have  finished  setting  up  your  monitor.  Execute  X-Window  after  setting  other  re-
quested hardware.
MDC (Multi-Display Channel) Installation
1.Insert the installation CD into the CD-ROM drive.
2.
Click the MDC installation file.  Note
If  the 

popup window to install the software for the main screen is not displayed, proceed
with the installation using the MDC executable file on the CD.
3. When the Installation Shield Wizard window appears, click "Next".
4. Select "I agree...

 Using MDC
Using the Software 

 
 
 
 
Introduction  
 
 A Multiple Display Control (MDC) is an application allowing various displays to be easily and simultaneously 
operated on a PC. RS-232C, a standard of serial communi
cation, is used for the communication between a PC and 
a display. Therefore, a serial cable sh ould be connected between the serial port on a PC and the serial port on a 
display.
Main Screen 
 
  Click Start > Program > Samsung > MDC System to start the program. 
  Select a set to see the volume of  the selected...

 
  
Main IconsSelect Button
RemoconInfo Grid
Safety LockDisplay Selection
Port SelectionControl Tools 
1. Use the main icons to switch into each screen.
2. Allows you to enable or disable the remote cont
rol signal receiving function of the display unit. 
3. Set the Safety Lock function.  When setting the Lock function, you can only operate  power and lock buttons on the remote control and set.
4. The setting for the PC Serial Port can change. The original value is COM1. 
5. Click Select all or Clear to...