Samsung Syncmaster 214t Quick Start Guide

 
MENU button [ ] 
 Opens the OSD menu.  
Also use to exit the OSD menu or return to the previous menu.  
Adjust buttons [ ]  These buttons allow you to adjust items in the menu.  
Analog/Digital(PC) : 
MagicBright™ button  
[]  
 
 
 
 MagicBright™ is a new feature  providing the optimum viewing 
environment depending on the contents of the image you are 
watching. Currently four differen t modes are available: Custom, 
Entertain, Internet, and Text. Each mode has its own pre-
configured brightness...

 
 
  
Power Indicator   
  This will enable you to see t
he overall power status of the 
system. For more information, see the  PowerSaver section.
See PowerSaver  described in the manual for further information regarding power saving \
functions. For energy conservation, turn your  monitor OFF when it is not needed, or when 
leavin
g it unattended for long periods.
 
 
 
 Rear 
(The configuration at the back of the m onitor may vary from product to product.)   
 
 
 
 
POWER S/W  
: Switch the monitor...

  
 
 
 
 
RGB IN (Source List : Analog)  :  
Connect the signal cable to the 15-pin,  
RGB IN port on the back of your monitor.
 
 
 
 
VIDEO (Source List : Video)  
: External device (video) input terminal  
S-VIDEO (Source List : S-Video)   
: External device (S-video) input terminal 
 
 
 
Kensington Lock  
: The Kensington lock is a device used to physically fix the 
system when using it in a public place.  
(The locking device has to be purchased separately.)  
For using a locking device, co ntact...

 
Connecting the Monitor 
 
1.Connect the power cord for your monitor to  the POWER IN on the back of the monitor. 
Plug the power cord for the  monitor into a nearby outlet.
2-1. Using the D-sub (Analog) connector on the video card.  
Connect the signal cable to the 15-pin, RGB  IN port on the back of your monitor. 
 
2-2. Using the DVI (Digital) connector on the video card. 
Connect the DVI cable to the DVI IN  port on the back of your monitor. 
 
2-3. Connected to a Macintosh. 
Connect the monitor to...

 
 
 
or a camcorder without disconnecting the PC.  
The configuration at the back of the monitor may vary from product to product.  
This product does not have speakers. 
To listen to audio, connect the audi o cable to another audio device.  
 
1. Connecting AV Devices  
The monitor has AV connection terminals to  connect AV input devices like DVD, VCR or 
Camcorder. You may enjoy AV signals as  long as the monitor is turned on. 
1. Input devices such as DVD, VCR or Camc order are connected to the VIDEO...

 
1. Input devices such as digital DVD are connected to the DVI IN terminal of the monitor using 
the DVI cable. 
 
2. Then, start the DVD with a DVD disc inserted.   
3. Select  Digital using the  SOURCE button . 
 
  
 
 Using the Stand  
   Removing the base 
  1. Turn off your monitor and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surf
ace with a cushion beneath it to protect the 
screen.  
3. Remove four screws(A) and then remove the Stand  from the LCD monitor....

  
   Attaching a Base 
 
   This monitor accepts a 100mm x 100m m VESA-compliant mounting interface pad.
A. Monitor  
 
B.  Mounting interface pad (sold separately)  
 
   1. Turn off your monitor  and unplug its power cord.  
2. Lay the LCD monitor face-down on a flat surf ace with a cushion beneath it to protect the 
screen.  
3. Remove four screws and then remove  the stand from the LCD monitor.  
4. Align the mounting interface Pad with the holes  in the rear cover mounting pad and secure it 
with...

 
 1. Insert CD into the CD-ROM drive.  
2. Click  Windows ME Driver .  
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
 
4. Click the  Install button in the  Warning window. 
 
 
 
5. Monitor driver installation is completed. 
 
    Windows XP/2000 
 
 
1. Insert CD into the CD-ROM drive.  
2. Click  Windows XP/2000 Driver   
3. Choose your monitor model in the model list, then click the  OK button. 
 
 
 
4. If you can see following message window, then click the...

 
5. Monitor driver installation is completed.  http://www.samsun
g.com/
.
 
 
Installing the Monitor Driver (Manual) 
Windows XP|  Windows 2000|Windows Me|Windows NT  | Linux   
 
When prompted by the operating system  for the monitor driver, insert the CD-ROM 
included with this monitor.  Driver installation is slightly  different from one operating 
system to another. Follow the directions  appropriate for the operating system you 
have.  
 
Prepare a blank disk and download the driver progr am file...

     
 
5. Click  Update Driver..  and select Install from a list or..  then click Next button.  
 
     
 
6. Select  Dont search ,I will..  then click Next and then click  Have disk.  
 
     
 
7. Click the  Browse button then choose A:(D:\Driver) and  choose your monitor model in the 
model list and click the  Next button.  
 
     
 
8. If you can see following  Message window, then click the  Continue Anyway button. Then 
click  OK button.