Samsung SP R4232 Plasma Display User Manual
Have a look at the manual Samsung SP R4232 Plasma Display User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1705 Samsung manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
111 1 Press the Menu button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Caption”, then press the ENTER button. 3 Press the ENTER button to select “Caption”. Press the ▲or ▼button to select “On”, then press the ENTER button. 4 Press the ▲or ▼button to select “Caption Mode”, then press the ENTER button. Press the ▲or ▼button to select submenu (CC1~CC4 or Text1~Text4) you want, the press the ENTER button. • The default is “CC1”. CC1 : The Primary Synchronous Caption Service. These are captions in the primary language that must be in sync with the sound, preferably matched to a specific frame. CC2 : The Special Non-Synchronous Use Captions. This channel carries data that is intended to augment information carried in the program. CC3 : Secondary Synchronous Caption Service. Alternate program-related caption data, typically second language captions. CC4 : Special Non-Synchronous Use Captions. Similar to CC2. 5 Press the MENU button to exit. Notes •The Caption feature doesn’t work in COMPONENT(480p, 720p, 1080i), PC, HDMI modes. •The availability of captions depends on the program being broadcast. Viewing Closed Captions (On-Screen Text Messages) - Analog The Analog Caption function operates in either analog RF channel mode or external signal mode. ➤ ➤Quick way to select Caption: Simply press the “CAPTION” button under the cover of the remote control. Caption : On√Caption Mode : Default√Caption Options√ CaptionTV MoveEnterReturn Caption : Off√Caption Mode : Default√Caption Options√ CaptionTV EnterReturn Caption : On Caption Mode :Default Caption Options CaptionTV MoveEnterReturn Default CC1 CC2 CC3 CC4 Text 1 Text 2 Text 3 Text 4 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn 8_BN68-00835C-00(104~115) 2/5/05 11:30 AM Page 111
112 Viewing Closed Captions (On-Screen Text Messages) - Digital The Digital Captions function operates on digital channels. 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Caption”, then press the ENTER button. 3 Press the ENTER button to select “Caption”. Press the ▲or ▼button to select “On”, then press the ENTER button. 4 Press the ▲or ▼button to select “Caption Mode”, then press the ENTER button. Press the ▲or ▼button to select submenu (Service1~Service6, CC1~CC4 or Text1~Text4) you want, then press the ENTER button. 5 Press the ▲or ▼button to select “Caption Options”, then press the ENTER button. Notes •“Caption Options” are available only when “Service1~Service6” can be selected in “Caption Mode”. •Service1~6 in digital caption mode may not be available according to the broadcasting type. Caption : On√Caption Mode : Default√Caption Options√ CaptionTV MoveEnterReturn Caption : On√Caption Mode : Service1√Caption Options√ CaptionTV MoveEnterReturn Caption : Off√Caption Mode : Default√Caption Options√ CaptionTV EnterReturn Caption : On Caption Mode : Default Caption Options CaptionTV MoveEnterReturn † Default Service1 Service2 Service3 Service4 Service5 Service6 CC1 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn 8_BN68-00835C-00(104~115) 2/5/05 11:30 AM Page 112
113 6 Press the ▲or ▼button to select “Size”, then press the ENTER button. Press the ▲or ▼button to select the desired Caption option, then press the ENTER button. Press the ▲or ▼button to select the desired sub-menu options(see options below), then press ENTER. Notes •The availability of captions depends on the program being broadcast. •The “Default” means to follow the rule of broadcasting. 7 Press the MENU button to exit. •Size This option consists of “Default”, “Small”, “Standard”, and “Large”. The default is “Standard”. •Font Style This option consists of “Default”, “Style 0 ~ Style 7”. You can change the font you want. The default is “Style 0”. •Foreground Color This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the color of the letter. The default is “White”. •Background Color This option consists of “Default”, “White”, “Black”, “Red”, “Green”, “Blue”, “Yellow”, “Magenta”, and “Cyan”. You can change the background color of the caption. The default is “Black”. •Foreground Opacity This option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”. You can change the opacity of the letter. •Background Opacity This option consists of “Default”, “Transparent”, “Translucent”, “Solid”, and “Flashing”. You can change the background opacity of the caption. •Return to Default This option sets each of “Size”, “Font Style”, “Foreground Color”, “Background color”, “Foreground Opacity”, and “Background Opacity” to its default. Alternate method: Press the CAPTION button on the remote control repeatedly to select “On” or “Off”. Size : Default√Font Style : Default√Foreground Color : Default√Background Color : Default√Foreground Opacity : Default√Background Opacity : Default√Return to Default : Default√ Caption OptionsTV MoveEnterReturn Caption : On 8_BN68-00835C-00(104~115) 2/5/05 11:30 AM Page 113
Menu Transparency Level Adjusts the transparency of the menu screen. 114 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Menu Transparency”, then press the ENTER button. Press the ▲or ▼button to select level, then press the ENTER button. 3 Press the MENU button to exit. Plug & Play Language : English Time V-Chip Caption Menu Transparency :Medium †More SetupTV MoveEnterReturn Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn High Medium Low Opaque 8_BN68-00835C-00(104~115) 2/5/05 11:30 AM Page 114
115 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Energy Saving”, then press the ENTER button. 3 Press the ▲or ▼button to select submenu (Standard, Auto Saving, or Super Saving) you want, then press the ENTER button. • Standard : Operates in standard mode regardless of the surrounding illumination. • Auto Saving : Automatically adjusts to the surrounding illumination. • Super Saving : Enters maximum power saving mode regardless of the surrounding illumination. 4 Press the MENU button to exit. Using the Energy Saving Feature This feature adjusts the screen brightness automatically depending on the surrounding lighting conditions. …More Energy Saving :Standard Screen Burn Protection PC Function Help : Off CableCARD TM CableCARDTMSetup SetupTV MoveEnterReturn …More Energy Saving :Standard Screen Burn Protection PC Function Help : Off CableCARD TM CableCARDTMSetup SetupTV MoveEnterReturn ➤ ➤Quick way to select Energy Saving: Simply press the “E.SAVING” button under the cover of the remote control. Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Standard Auto Saving Super Saving Standard Auto Saving Super Saving 8_BN68-00835C-00(104~115) 2/5/05 11:30 AM Page 115
Preventing Screen Burn-in To reduce the possibility of screen burn, this unit is equipped with screen burn prevention technology. This technology enables you to set picture movement up/down (Vertical Line) and side to side (Horizontal Dot). The Time setting allows you to program the time between movement of the picture in minutes. 116 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Screen Burn Protection”, then press the ENTER button. 3 Press the ENTER button to select “Pixel Shift”, then press the ENTER button. • Pressing the ▲or ▼button will alternate between “On” and “Off”. You will also see the items “Horizontal Dot”, “Vertical Line” and “Time”. • Pixel Shift: Using this function, you can minutely move pixels on the PDP in horizontal or vertical direction to prevent after image on the screen. 4 Press the ▲or ▼button to select the item you wish to change, then press the ENTER button. Press the ▲or ▼button to change the value of the item, then press the ENTER button. • Optimum condition for pixel shift; Pixel Shift√All White : Off√Signal Pattern : Off√ Screen Burn ProtectionTV MoveEnterReturn Pixel Shift :On Horizontal Dot : 2 Vertical Line : 4 Time : 4 Pixel ShiftTV MoveEnterReturn Pixel Shift : On Horizontal Dot :2 Vertical Line : 4 Time : 4 Pixel ShiftTV MoveEnterReturnHorizontal Dot Vertical Line Time2 4 4 Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Off On 0 1 2 3 4 8_BN68-00835C-00(116~133) 2/5/05 6:48 PM Page 116
117 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Screen Burn Protection”, then press the ENTER button. 3 Press the ▲or ▼button to select “All White” or “Signal Pattern”, then press the ENTER button. • All White: This function removes after images on the screen by changing the color of pixels to white. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. • Signal Pattern: This function removes after images on the screen by moving all the pixels on the PDP according to a pattern. Use this function when there are remaining after images or symbols on the screen especially when you displayed a still image on the screen for a long time. 4 Press the ▲or ▼button to select “On”, then press the ENTER button. • Pressing the ▲or ▼button will alternate between “On” and “Off”. 5 Press the MENU button to exit. Notes •To remove after-images on the screen, use either the “All White” or “Signal Pattern” function. Although both functions remove after-images on the screen, “Signal Pattern” is more effective. •The after-image removal function has to be executed for a long time (approximately 1 hour) to effectively remove after-images on the screen. If the after-image is not removed after performing the function, repeat the function again. Reducing the Effects of Screen Burn If screen burn has occurred, you can select a white screen or signal pattern (rolling screen) to help remove screen burn artifacts. Pixel Shift All White :On Signal Pattern : On Screen Burn ProtectionTV MoveEnterReturn Pixel Shift All White : On Signal Pattern :On Screen Burn ProtectionTV MoveEnterReturn Pixel Shift√All White : Off√Signal Pattern : Off√ Screen Burn ProtectionTV MoveEnterReturn Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Off On Off On BN68-00835C-00(116~133) 2/14/05 10:08 AM Page 117
1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “Function Help”, then press the ENTER button. 3 Press the ▼button to select “On”, then press the ENTER button. 4 Press the MENU button to exit. Setting the Function Help Displays help on the menu functions. 118 …More Energy Saving : Standard Screen Burn Protection PC Function Help : Off CableCARD TM CableCARDTMSetup SetupTV MoveEnterReturn …More Energy Saving : Standard Screen Burn Protection PC Function Help : Off CableCARD TM CableCARDTMSetup SetupTV MoveEnterReturn Switches the Function Help on. Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Off On Off On 8_BN68-00835C-00(116~133) 2/5/05 11:37 AM Page 118
119 Using the V-Chip The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V-Chip restrictions are set up or changed. Notes : ●When the V-chip feature is activated, the PIP features do not function. ●The V-Chip does not work if the input is DTV (HD or SD). Setting Up Your Personal ID Number (PIN) 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. Note • The default PIN number of a new TV set is “0-0-0-0”. 3 The “V-Chip” screen will appear. Press the ▲or ▼ button to select “Change PIN”, then press the ENTER button. 4 The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them. As soon as the 4 digits are entered, the “Confirm new PIN” screen appears. Re-enter the same 4 digits. When the Confirm screen disappears, your PIN has been memorized. 5 Press the MENU button to exit. Note •If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : Power Off. ➔ Mute ➔8 ➔2 ➔4 ➔Power On. V-ChipTV 0~ 9 Enter PIN Return Enter PIN **** Change PINTV 0~ 9 Enter PIN Return Enter New PIN Confirm New PIN Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn 8_BN68-00835C-00(116~133) 2/5/05 11:37 AM Page 119
How to Enable/Disable the V-Chip 1 Press the MENU button. Press the ▲or ▼button to select “Setup”, then press the ENTER button. 2 Press the ▲or ▼button to select “V-Chip”, then press the ENTER button. The message “Enter PIN” will appear. Enter your 4 digit PIN number. 3 The “V-Chip” screen will appear. To enable the V-Chip feature, press the ENTER button so that the “V-Chip Lock” field is “On”. (Pressing the ▲or ▼button will alternate between “On” and “Off”.) Press the ENTER button. 4 Press the MENU button to exit. 120 V-Chip Lock :English TV Parental Guidelines MPAA Rating Change PIN V-ChipTV MoveEnterReturn V-ChipTV 0~ 9 Enter PIN Return Enter PIN **** Plug & Play√Language : English√Time√V-Chip√Caption√Menu Transparency : Medium√ †More SetupTV MoveEnterReturn Off On 8_BN68-00835C-00(116~133) 2/5/05 11:37 AM Page 120