Samsung SF 650 User Manual

Media and tray_ 30
Letterhead/ Preprinted paper
•Letterhead/ Preprinted paper must be printed with heat-resistant  ink that will not melt, vaporize, or release hazardous 
emissions when subjected to the machi ne’s fusing temperature for 0.1 second. Check your machine’s specification to 
view the fusing temperature (about 170°C (338 °F)).
• Letterh
ead/ Preprinted paper ink must be non-flammable and  should not adversely affect machine rollers.
• For
ms and letterhead should be sealed in a moisture-p roof...

Copying_ 31
4.Copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
•Basic copy
• Changing the settings for each copy
• Changing the default copy settings
• Setting copy timeout
  
Basic copy
This is the normal and usual procedure for copying your originals.
1.Press
 (Copy) on the control panel.
2. Load or
 iginals face down into the document feeder (See  In the document feeder on page 26).
3. If necessary, adjust the settin
 gs for each copy such as...

Copying_ 32
5.Press the left/right arrow until the si ze setting you want appears and press  OK.
6. Press  Stop/Clear  to return to ready mode.
To scale the copy by directly entering the scale rate:
1.Press (Copy) on the control panel. 
2.Press  Menu until Copy Setup  appears.
3. Press the left/right arrow until  Default-Change appears and press  OK.
4. Press the left/right arrow until  Reduce/Enlarge appears and press  OK.
5. Press the left/right arrow until  Custom appears and press  OK.
6. Press the...

Faxing_ 33
5.Faxing
This chapter gives you information about  using your machine as a fax machine.
This chapter includes:
•Preparing to fax
• Sending a fax
• Receiving a fax
• Adjusting the document settings
• Forwarding a fax to other destination
• Setting up address book
• Printing sent fax report automatically
  
 •You cannot use this machine as a fax via the internet  phone. For more information ask the internet service 
provider.
• We recommend you to use traditional analog phone services  (PSTN:...

Faxing_ 34
5.Press  Start on the control panel. The machine starts  to scan and send a fax to destinations.
 When you want to cancel a fax job, press  Stop/Clear before the machine start transmission.
Sending a fax manually
This method is sending a fax using  On Hook Dial on the control panel.
1. Press
 (Fax) on the control panel.
2. Load or
 iginals face down into the document feeder.
3. Adjust the r esolution and the darkness to suit your fax needs (See  Adjusting the document settings on page 38).
4....

Faxing_ 35
You can press speed dial numbers or select group dial number using  Address book button. For details, see  Setting 
up address book on page  39.
6. The display asks you to ente
 r another fax number to send the document.
7. To ente
 r more fax numbers, press  OK when Yes  appears and repeat steps 5. You can add up to 10 destinations.
 Once you entered a group dial number, you cannot  enter another group dial numbers anymore.
8. Wh
en you have finished enteri ng fax numbers, press the...

Faxing_ 36
Receiving a fax
This part explains how to receive a fax,  and the special receiving methods available.
Changing the receive modes
Your machine is preset to  Fax mode at the factory. When you receive a fax, the machine answers the call on a specified 
number of rings and automatically receives the fax. But if you want to change the Fax mode to another mode, follow the 
steps below:
1. Press
 (Fax) on the control panel.
2. Press
  Receive Mode  on the control panel.
3. Press the
  left/right...

Faxing_ 37
Receiving faxes using DRPD mode
Distinctive Ring is a telephone company  service which enables an user to use a single telephone line to answer several 
different telephone numbers. The particular number someone uses  to call you is identified by different ringing patterns, 
which consist of various combi nations of long and short ringing sounds. This feature is often  used by answering services 
who answer telephones for many different clients and need to  know which number someone is calling...

Faxing_ 38
Adjusting the document settings
Before starting a fax, change the following settings accord ing to your original’s status to get the best quality.
Resolution
The default document settings procedure good results when usi ng typical text-based originals. However, if you send 
originals that are of poor quality, or contain photographs,  you can adjust the resolution to produce a higher quality fax. 
1. Press
 (Fax) on the control panel.
2. Press
  Resolution  on the control panel.
3. Press the...

Faxing_ 39
7.Enter the ending time using left/right  arrow or numeric keypad and press  OK.
8. Press
  Stop/Clear  to return to ready mode.
Subsequent received faxes will be forwarded to the specified fax machine.
Setting up address book
You can set up Address Book  with the fax numbers you use most frequently . Your machine provides you with the 
following features for setting up  Address Book:
 Before beginning to store fax numbers, make su re that your machine is in Fax mode.
One-touch Dialing
The 20...