Samsung SCX 4826FN User Manual

Loading originals and print media_31
2.Load the original face up into the ADF. Make sure that the bottom of the 
original stack matches the paper size marked on the document input 
tray.
3.Adjust the document width guides to the paper size.SELECTING PRINT MEDIA
You can print on a variety of print media, such as plain paper, envelopes, 
labels, and transparencies. Always use print media that meet the guidelines 
for use with your machine. Print media that does not meet the guidelines 
outlined in this...

Loading originals and print media_32
Specifications on print media
TYPESIZEDIMENSIONSWEIGHTACAPACITYB
Plain paperLetter 216 x 279 mm (8.5 x 11 inches)
• 60 to 105 g/m2 (16 to 28 lb 
bond) for the tray
• 60 to 163 g/m
2 (16 to 43 lb 
bond) for the manual tray• 250 sheets of 80 g/m
2 (20 lb 
bond) paper for the tray
• 1 sheet in the manual tray
• 250 sheets of 80 g/m
2 
(20 lb bond) paper for 
optional tray Legal 216 x 356 mm (8.5 x 14 inches)
US Folio 216 x 330 mm (8.5 x 13 inches)
A4 210 x 297 mm (8.26 x...

Loading originals and print media_33
Media sizes supported in each mode
Guidelines for special print media
MODESIZESOURCE
Copy modeLetter, A4, Legal, 
Oficio, US Folio, 
Executive, JIS B5, A5, 
A6• tray 1
• optional tray 2
• manual tray
Print modeAll sizes supported by 
the machine• tray 1
• optional tray 2
• manual tray
Fax modeLetter, A4, Legal • tray 1
• optional tray 2
Duplex printing
a
a. 75 to 90 g/m2 (20~24 lb bond) only Letter, A4, Legal, US 
Folio, Oficio• tray 1
• optional tray 2
MEDIA...

34 _Loading originals and print media
CHANGING THE SIZE OF THE PAPER IN THE 
PAPER TRAY
To load longer sizes of paper, such as Legal-sized paper, you need to 
adjust the paper guides to extend the paper tray.
1.Press and hold the guide lock, and slide the paper length guide to locate 
it in the correct paper size slot. It is preset to Letter or A4 size depending 
on the country. 
2.After inserting paper into the tray, adjust the support guide so that it 
lightly touches the paper stack. 
3.Squeeze the...

Loading originals and print media_35
PRINTING ON SPECIAL PRINT MATERIALS
The machine can hold special sizes and types of print material, such as 
postcards, note cards, and envelopes. Especially, it is useful for single page 
printing on letterhead or colored paper.
Feeding the print material manually
• Load only one size of print media at a time in the tray.
• To prevent paper jams, do not add paper when there is still paper in 
the tray. This also applies to other types of print media.
• Print media...

36 _Loading originals and print media
ADJUSTING THE OUTPUT SUPPORT
The printed pages stack on the output tray, and the output support will help 
the printed pages align. To let the output support correctly align the pages 
you need to pull it out appropriately depending on the paper size.
Stacking papers firmly
If you use a machine in a humid area, or you are using the damp print media 
caused by a high humidity, the print-outs on the output tray may be curled 
and may not be stacked properly. In this...

37 _Copying
copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
• Selecting the paper tray
• Copying
• Changing the settings for each copy
• Changing the default copy settings• ID card copying
• Using special copy features
• Printing on both sides of paper
• Setting copy timeout
SELECTING THE PAPER TRAY
After loading the print media for copy output, you must select the paper tray 
you will use for copy jobs.
1.Press Menu until System Setup appears on the...

38 _Copying
CHANGING THE DEFAULT COPY SETTINGS
The copy options, including darkness, original type, copy size, and number 
of copies, can be set to those most frequently used. When you copy a 
document, the default settings are used unless they have been changed by 
using the corresponding buttons on the control panel.
1.PressCopy.
2.Press Menu until Copy Setup appears on the bottom line of the display 
and press OK.
3.Press OK when Change Default appears.
4.Press the left/right arrow until the setup...

Copying_39
2-up or 4-up copying
Your machine can print 2 or 4 original images reduced to 
fit onto one sheet of paper.   
1.PressCopy.
2.Load originals face up into the ADF, or place a single 
original face down on the scanner glass.
For details about loading an original, see page 30.
3.Press Menu until Copy Feature appears on the 
bottom line of the display and press OK.
4.Press the left/right arrow until Layout appears and 
press OK.
5.Press the left/right arrow until 2-Up or 4-Up appears 
and press...

40 _Copying
PRINTING ON BOTH SIDES OF PAPER
You can set the machine to print documents on both sides of paper. 
1.PressCopy.
2.Press Menu until Copy Setup appears on the bottom line of the display 
and press OK.
3.Press the left/right arrow until Duplex Print appears and press OK.
4.Press the left/right arrow until the binding option you want appears.
• Off:Copys in Normal mode.
•Short Edge:Copys pages to be read by flipping like a note pad.
• Long Edge:Copys pages to be read like a book.
5.Press OK to...