Samsung SCX 4725FN User Manual

5.5   
Transparencies • To avoid damaging the machine, use only 
transparencies designed for use in laser printers.
• Transparencies used in the machine must be  able to withstand 180 °C, the machine’s fusing 
temperature.
• Place them on a flat surface after removing them  from the machine.
• Do not leave them in the paper tray for long  periods of time. Dust and dirt may accumulate 
on them, resulting in spotty printing.
• To avoid smudging caused by fingerprints,  handle them carefully.
• To avoid...

5.6   
3 Load the paper  with the side to be printed on facing up .
4 Squeeze the paper width guide and adjust it to the width of the 
paper.
5 Squeeze the paper length guide and adjust it to the length of the 
paper.
6 After loading paper, set the paper type and size for the tray. See 
page 5.7 for copying and faxing or the  Software Section for PC-
printing.
Notes
• Do not push the paper width guide far enough to cause  the materials to warp.
• If you do not adjust the paper width guide, it may cause...

5.7   
3 After loading paper, set the paper type and size for the manual tray. 
See the next section for copying and faxing or the  Software 
Section  for PC-printing.
Note 
The settings made from the printer driver override the 
settings on the control panel.
Tips on using the manual tray
• Load only one sheet of print media at a time in the manual tray.
• To prevent paper jams, do not add paper when there is still paper in  the manual tray. This also applies to other types of print media.
• Print...

6.1   
6 Copying
This chapter gives you step-by-step instructions for copying documents.
This chapter includes:
• Copying
• Changing the settings for each copy
• Changing the default copy settings
• Using special copy features
• Setting copy timeout
Copying
1 Load originals face up into the ADF, or place a single original face 
down on the scanner glass.
For details about loading an original, see page 5.1.
2 If you want to customize the copy settings including darkness, 
original type, the number of...

6.2   
Reduced or enlarged copy
By using the  Reduce/Enlarge  button, you can reduce or enlarge the size 
of a copied image from 25% to 400% when you copy original documents 
from the scanner glass, or from 25% to 100% from the ADF.
To select from the predefined copy sizes:
1 Press  Reduce/Enlarge . 
2 Press  Reduce/Enlarge  or the Scroll buttons until the size setting 
you want appears and press  Enter.
To scale the copy by directly entering the scale rate:
1 Press  Reduce/Enlarge . 
2 Press...

6.3   
Auto fit
ID card copying
Your machine can automatically reduce or enlarge the 
original image to fit on the paper currently loaded in 
the machine.
This copy feature is available only when you place 
originals on the scanner glass.
1 Place a single original face down on the scanner 
glass. 
For details about loading an original, see 
page 5.1.
2 Press  Favorite Copy  until Autofit  appears on 
the bottom line of the display and press  Enter.
3 Press  Start to begin copying.
Note 
You cannot...

6.4   
Poster copying
Setting copy timeout
You can set the time the machine waits before it restores the default copy 
settings, if you do not start copying after changing them on the control 
panel.
1 Press  Menu until Copy Setup  appears on the top line of the display. 
2 Press the  Scroll buttons until  Timeout appears and press  Enter.
3 Press the  Scroll buttons until the time setting you want appears.
Selecting  Off means that the machine does not restore the default 
settings until you press...

7.1   
7 Basic printing
This chapter explains common printing tasks. 
Printing a document
Your machine allows you to print from various Windows, Macintosh1, or 
Linux applications. The exact steps for printing a document may vary 
depending on the application you use.
For details about printing, see the  Software Section.
Canceling a print job
If the print job is waiting in a print queue or print spooler, such as the 
printer group in Windows, delete the job as follows:
1Click the Windows  Start menu.
2...

8.1   
8 Scanning
Scanning with your machine lets you turn pictures and text into digital files 
that can be stored on your computer. Then you can fax or email the files, 
upload them to your website, or use them to create projects that you can 
print.
Scanning basics
Your machine offers the following ways to scan an image:
• Via one of the preset imaging applications. Scanning an image 
launches the selected application, enabling you to control the 
scanning process. See the next section.
• Via the...

9.1   
9 Faxing 
This chapter gives you information about using your machine as a fax 
machine. 
This chapter includes:
Sending a fax
• Setting the fax header
• Adjusting the document settings
• Sending a fax automatically
• Sending a fax manually
• Confirming a transmission
• Automatic redialing
• Redialing the last number
Receiving a fax
• Changing receiving modes
• Receiving automatically in Fax mode
• Receiving manually in Tel mode
• Receiving manually using an extension telephone
• Receiving...