Samsung SCX 4300 User Manual

9_Safety information
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus as set out in the interference-causing 
equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry and Science Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils numériques de Classe B prescrites dans la 
norme sur le matériel brouilleur: “Appareils Numériques”, ICES-003...

Safety information_10
REPLACING THE FITTED PLUG (FOR UK ONLY)
Important
The mains lead for this machine is fitted with a standard (BS 1363) 13 amp plug and has a 13 amp fuse. When you change or examine the 
fuse, you must re-fit the correct 13 amp fuse. You then need to replace the fuse cover. If you have lost the fuse cover, do not use the plug until 
you have another fuse cover. 
Contact the people from you purchased the machine.
The 13 amp plug is the most widely used type in the UK and should be...

11_Safety information
Downloaded From ManualsPrinter.com Manuals 

Introduction
1.1
 1Introduction
Thank you for purchasing this Samsung multifunctional 
product. Your machine provides printing, copying, and scanning 
functions!
This chapter includes:
• Special features
• Understanding component locations
Special features
Your new machine is equipped with special features that 
improve the print quality. You can:
Print with excellent quality and speed
• You can print up to 600 dpi X 600 dpi. See the Software 
Section
.
• Your machine prints A4-sized paper at up to 18...

Introduction
1.2
Understanding component 
locations
These are the main components of your machine:
Front view
1document cover6manual feeder guides
2document glass7paper input tray
3control panel8manual feeder
4front cover9output tray
5toner cartridge10scan unit
Rear view
1rear cover3power receptacle
2USB port4power switch
Downloaded From ManualsPrinter.com Manuals 

Introduction
1.3
Control panel functions
SCX-4300
1Displays the current status and prompts during an operation. 
2Status- Shows the status of your machine. See page 9.3.
3Menu- Enters Menu mode and scrolls through the available menus.
4Scroll through the options available in the selected menu.
5OK- Confirms the selection on the display.
6Back- Sends you back to the upper menu level.
7Copies- Allows you to enter the number of copies.
8Stop/Clear- Stops an operation at any time.
In Standby mode,...

Getting started
2.1
2Getting started
This chapter gives you step-by-step instructions for setting up 
your machine.
This chapter includes:
Setting up your machine
• Selecting a location
• Installing the toner cartridge
• Loading paper
• Making connections
• Turning the machine on
• Setting up the machine system
• Overview of control panel menus
• Changing the display language
• Using the save modes
• Printer software overview
• Supplied printer software
• Printer driver features
• System requirements...

Getting started
2.2
Selecting a location
Select a level, stable place with adequate space for air 
circulation. Allow extra space for opening covers and trays. 
The area should be well-ventilated and away from direct 
sunlight or sources of heat, cold, and humidity. Do not set the 
machine close to the edge of your desk or table. 
Clearance space
•Front: 482.6 mm (enough space so that the paper tray can 
be removed)
•
Back: 100 mm (enough space for ventilation)
•
Right: 100 mm (enough space for...

Getting started
2.3
CAUTION:
• To prevent damage, do not expose the toner cartridge to 
light for more than a few minutes. Cover it with a piece of 
paper, if left exposed for more than a few minutes.
• Do not touch the green underside of the toner cartridge. Use 
the handle on the toner cartridge to avoid touching this area.
5Hold the toner cartridge by the handle. Slowly insert the 
toner cartridge into the opening in the machine. 
6Tabs on the sides of the toner cartridge and corresponding 
grooves...

Getting started
2.4
4Pay attention to the paper limit mark on both inside walls 
of the paper input tray. Paper overloading may cause 
paper jams.
5Insert and slide the paper input tray back into the 
machine.
NOTE: After you load paper, you need to set up your machine 
for the paper type and size you loaded. See page 3.6 for 
copying, or the 
Software Section for PC-printing. The 
settings made from the printer driver override the settings on 
the control panel.
Changing the size of the paper in the...