Samsung Prostar Dcs Compact System Administration Special Features Guide

PROGRAM STATION GROUP NAMESThis program is used to assign a character name or identification for each sta-
tion group (501–529). To verify the system software version, press TRSF 727. I f
the version is V1.x, you may assign a name ten characters long. If the version
is V2.x, you may assign a name 11 characters long.
PROGRAM KEYS
UP & DOWN - Used to scroll and move cursor.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and follow the instructions below....

16 3. Enter the access code (e.g., 9) (the systemSYS SPEED DIAL
will automatically insert a dash) followed by505:9–1212234567
the phone number (up to 18 digits long)
and press the right soft key to return to
step 2
4. Press the F key to toggle to 
Program
SYS SPEED NAME
System Speed Dial Names
, step 3 to505:
enter the name
5. Press TRSF to store and exit
programming OR press SPK to store
and advance to the next program
DEFAULT DATA: NO SPEED NUMBERS ASSIGNED
17
PROGRAM SYSTEM SPEED DIAL
NAMESThis...

18PROGRAM PERSONAL SPEED DIAL
NUMBERS FOR OTHER STATIONSIndividual station users can program their own numbers, but in cases where this
is not practical, or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial numbers. The station
speed dial codes are 00
–49. Each station begins with ten numbers (00
–09) and
can be assigned more in blocks of ten (up to a maximum of fifty numbers).
Each speed dial number consists of a line access code and...

20PROGRAM PERSONAL SPEED DIAL
NAMES FOR OTHER STATIONSEach individual station user can program his/her own names but in cases where
it is impractical or for single line telephone users, this program allows a system
administrator to view or change any station’s speed dial names. The station
speed dial codes are 00–49. Each station begins with ten numbers (00–09) and
can be assigned more in blocks of ten up to a maximum of fifty numbers.
PROGRAM KEYS
UP & DOWN - Used to scroll through extension numbers and...

CREATE PROGRAMMED
STATION MESSAGESMessages 1
–10 are programmed from the factory and cannot be changed. How-
ever, you can create ten additional sixteen character messages (11
–20) that fit
your company’s needs. After programming these messages, inform other em-
ployees so the employees can add the new messages to the list on the back of
their user guides.
PROGRAM KEYS
UP & DOWN - Select the message number.
KEYPAD - Used to enter characters.
HOLD - Press to clear entry.
Open customer programming and...

24MANAGING KEY ASSIGNMENTSYou can view station key assignments and add extenders to some of the pro-
grammable keys for easy one touch operation of frequently used features.
An extender is a number that makes an otherwise general key very specific.
Adding the digit “4” to a PA G E key defines this key for paging zone four. Adding
“225” to a directed pickup key will define this key as pickup for extension 225
only. The key must already be assigned by the installing technician.
Use this program to assign...

26PROGRAMMING ACCOUNT CODESThis program is used to add or change account code entries.
PROGRAM KEYS
KEYPAD - Used to enter the account code (allowable digits 0–9).
UP & DOWN - Used to select entry number.
FLASH & TRSF - Used to view and change only the used entries.
SPK/RLS - Used to clear data.
Open customer programming and follow the instructions below.
ACTIONDISPLAY
1. Press TRSF and then dial 708 ACCOUNT CODE
Display shows(
001)
2. Dial the account code entry (e.g., 005)ACCOUNT CODE
OR press UP or...

28ADDING  NAMES TO THE
TRANSLATION TABLEThis program allows the system administrator or technician to associate a CID
number received from the Central Office with a name programmed in this trans-
lation table. If there is no match between a received number and a name in this
table, [no CID name] will be displayed.
The translation table consists of 250 entries with each entry comprised of a ten
digit telephone number and a 16 digit name.
Names are written using the keypad. Each press of a key will select...

30CUSTOMER SET RELOCATION[RELEASE 2 ONLY]This program is used to swap information associated with two stations. All as-
signments such as trunk ring, station group, station COS, station speed dial
etc. will follow this program. 12 button keysets and 24 button keysets can be
exchanged. Basic 7 button keysets can be exchanged with Basic 7 button key
sets. Single line stations numbers can be exchanged. If incompatible set types
are selected the DCS COMPACT system will provide an ERROR: NO MATCH
message. 12...

SYSTEM ACCESS CODES
The PROSTAR DCS COMPACT telephone system has preset (default) feature
access codes that use the following number plan. These codes can be used if a
key is not available for the feature you want to use. Standard telephone users
must always dial these codes.0 Call attendant or system 530 Out of group
 operator 531 In the group
10 + xxx Retrieve parked calls 54 + zone Meet Me Page
11 To put on and take calls 55 + 0 Page all internal zones
off  hold 55 + 1 Page internal zone 1
12 + xxx...