Home
>
Samsung
>
Communications System
>
Samsung Prostar Dcs Compact System Administration Special Features Guide
Samsung Prostar Dcs Compact System Administration Special Features Guide
Here you can view all the pages of manual Samsung Prostar Dcs Compact System Administration Special Features Guide. The Samsung manuals for Communications System are available online for free. You can easily download all the documents as PDF.
Page 1
SYSTEM ADMINISTRATION AND SPECIAL FEATURES GUIDE SYSTEM ADMINISTRATION AND SPECIAL FEATURES GUIDE PROSTAR DCS COMPACT DIGITAL COMMUNICATIONS SYSTEM System Software Release 1, 2 November 1997
Page 2
TABLE OF CONTENTS ABOUT THIS BOOK .......................................................... 1 SPECIAL FEATURESAutomatic Night Service .................................................................... 2 Manual Night Service ........................................................................ 2 Calling The System Operator ............................................................ 2 Operator Recalls ............................................................................... 3 Executive...
Page 3
1 ABOUT THIS BOOK This book contains instructions for special features that every telephone user may not need to know. The owner can decide who the system administrator will be and who will have access to these features. Station users can be trained on only the items that apply to them. This procedure will help control costs and telephone abuse. Several of the features listed in this book are specific to the system operator or attendant position. You can have more than one operator or set your system...
Page 4
SPECIAL FEATURES NIGHT SERVICE OPERATION(AUTOMATIC OR MANUAL)Your system is designed to have an alternate mode of operation generally des- ignated as Night Service. Night Service permits incoming calls to ring differently than during normal day operation. Night Service is available on an individual tenant basis and may be set manually or automatically. While in the Night mode, each station will be limited to its individual night class of service dialing restric- tions. You can put the system in or out of...
Page 5
4IN/OUT OF GROUPAny station assigned to a station group can remove itself from that group and then reenter the group at a later time. When out of the group, a station can receive calls to its extension number but not to the group. There are 30 groups and the access codes are 500–529. To create a backup or relief operator position, assign the main operator and one or more backup individuals to the operator group. All but the main operator should be out of the group. When it is necessary to use a backup...
Page 6
AUTHORIZATION CODESAuthorization codes are used to validate a station user and give permission to make a call. These four digit authorization codes can be either forced or op- tional, but if used, are always verified from a system list of 100 entries. Each authorization code has an associated class of service. When the code is en- tered, the class of service is changed to that of the authorization code.USING AUTHORIZATION CODESAfter going off-hook, the station user must dial ✱ followed by a four digit...
Page 7
CALLER ID SPECIAL FEATURESNOTE: The Caller ID features below require optional software and/or hardware. Please ask your installation and service company for details.ABANDON CALL LIST (50)The system has a system-wide abandoned call list that stores CID information for the last 50 calls that rang but were not answered and were accompanied with valid CID information. Calls with CID information consisting of OUT OF AREA, PAYPHONE or PRIVATE will not be stored in the list. The abandoned calls list is accessed...
Page 8
SYSTEM ADMINISTRATOR PROGRAMMING CUSTOMER LEVEL ACCESSBefore any customer programs can be accessed, you must first open system programming using the passcode you have been assigned. This must be done using an LCD 24B keyset. Should it become necessary to change this passcode, see your service company.z While your handset is on-hook, press TRSF and then dial 200. The display shows [ENABLE CUS. PROG. PASSCODE]. z Dial the four digit passcode. The display shows [ENABLE CUS. PROG. - DISABLE]. z Dial 1 to...
Page 9
10RESET STATION PASSCODES TO DEFAULTIndividual keyset users can set or change their own individual passcodes. These passcodes are used to lock and unlock keysets, override toll restriction and access the DISA feature. At times, it may be necessary for the system admin- istrator to reset a station’s passcode to default “1234.” This program cannot be used to display passcodes, only to reset them. PROGRAM KEYS UP & DOWN - Select the extension number. HOLD - Press to reset the passcode. Open customer...
Page 10
12 NOTE: When the character you want appears on the same dial pad key as does the previous character, press the UP key to move the cursor to the right. COUNT 1 2 3 4 5 DIAL 0 Q Z . ) 0 DIAL 1 space ? , ! 1 DIAL 2 A B C @ 2 DIAL 3 D E F # 3 DIAL 4 G H I $ 4 DIAL 5 J K L % 5 DIAL 6 M N O ^ 6 DIAL 7 P R S & 7 DIAL 8 T U V ✱ ✱✱ ✱ ✱8 DIAL 9 W X Y ( 9 DIAL ✱ ✱✱ ✱ ✱ := [ ] ✱ ✱✱ ✱ ✱ The # key can be used for the following special characters: #, space, &, !, :, ?, ., %, $, -, /, =, [, ], @, ^, (, ), _, +, {, },...