Samsung Projector Sp P400b User Manual

   
   Kensington Lock 
 
 
 
 The Kensington Lock is a device used to physically fix the syst
em when using it in a public place. The locking device has to b e 
purchased separately. The appear ance and locking method may differ from the illustration depending on the manufacturer. 
Refer to the manual provided wi th the Kensington Lock for prope r use. The locking device has to be purchased separately. 
 
Insert the locking device into the Kensington slot on the Monit or ( ) and turn it in the locking...

 
 
 |  Input | Picture | Setup | Option | 
 
 
 
 
* Click the Play( )/Stop( ) button in the table below to view the  video file. 
Screen 
Adjustment  Description  Play/Stop 
Source List  You can select a device connecte d to the projector to display. 
  1) Video   2) PC 
Edit Name You can edit the names of device s connected to the projector. 
  1) Video   2) PC 
 
 
 
|  Input | Picture | Setup | Option | 
 
  

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Mode Select a screen state which is customized to your projector or  change the screen mode as 
required. 
 
1) Mode
  - Dynamic   
Select this if you want the screen quality to be clearer than s tandard screen 
quality. 
  -Standard  
You can comfortably view the pro jection screen if the surrounding is somewhat 
bright. 
  -Movie  
Select this if your surroundings are dark. This...

 -Video  : The best setting for w atching a TV program.
  -Graphic  : The best setting when  you have a PC connected.
  - Vivid  : The gamma mode suitable for watching a movie.  Gamma
  9) Save : Used to save custom picture settings.
Save
  10) Reset : Restores the mode settings to the factory defaults. 
Reset
Size You can select a screen size acc ording to the type of scene.  
 
 
▶  Supported Resolution/Size Modes  
1) Normal
2) Zoom1 
3) Zoom2 
4) 16:9 
Source Picture Size 
Input Mode Normal Zoom 1...

* Click the Play( )/Stop( ) button in the table below to view the video file. 
Screen 
Adjustment  Description  Play/Stop 
Install To tailor the picture to the installation location, you can inv ert the projected images 
vertically/horizontally.  
 
  1) Front-Floor  : Normal Image
  2) Front-Ceiling  : Horizontally Reversed Image
  3) Rear-Floor  : Vertically Reversed Image
  4) Rear-Ceiling  : Horizontal/Vertical Reversed Image 
V-Keystone If video scences are distorted or tilted, you can compensate fo...

 
 
 2) Coarse 
: Used to adjust frequency when vertical lines appear on PC scr een.
  3) Fine  : Used to fine tune the PC screen.
  4) Zoom  : Used to extend PC screen from the center.
  5) Reset  : Using this function, you can reset the PC menu settings to th e factory 
default settings. Zoom 
Reset  
Factory Default Using this function, you can reset various settings to the fact ory default settings. 
 
 
 
 
|  Input | Picture | Setup | Option | 
 
 
* Click the Play( )/Stop( ) button in the table...

 
 
Menu Display 
TimeYou can set the display time of the menu. 
 
1) 5 sec  5) 90 sec
2) 10 sec  6) 120 sec
3) 30 sec  7) Stay On 
4) 60 sec   
Logo If Logo mode is enable d, the Samsung logo is displayed when the  projector is turned 
on. If disabled, it is not displayed.  
 
Blue screen  The Blue screen function causes t he screen to change to the Blue screen if there is no 
signal input from the external d evice connected to your project or. 
 
  1) Off
  2) On
Information You can check external...

 
 
 |  Before Contacting Service Personnel | 
 
 
   
 Installation and Connection 
 
Symptoms   Troubleshooting 
No Power.
zCheck the power cable connections.  
I want to install my projector on 
the ceiling. 
zThe ceiling installation support  is sold separately. Contact your local product 
distributor.  
External Source can not be 
selected.
zBe sure that the connection cabl e(s) (video) is properly connected to the 
proper port. If the devi ce is not connected properly, it can no t be selected....

 
correctly in the  command screen of the Projector menu.  
Only blue screen appears.
zBe sure to properly connect the  external devices. Check the connection cables 
again. 
Screen appears in black and white or 
odd color./ screen  is too dark or 
bright.
zAs mentioned above, check the adjustment items such as the Brig htness, 
Contrast and Color in the menu.  
zIf you want to restore various settings to their factory defaul ts, run from the menu.  
 
  

 
 
 |  Care and Maintenance | Contact SAMSUNG WORLDWIDE | Other |Authority | 
 
 
 
  
   
To clean the exterior and lens of the projector 
 
Clean the projector us ing a soft dry cloth. 
 
Do not clean the projector with flammable 
substances such as benzene, thinners or a wet 
cloth, as these ma y cause problems. 
 
Do not touch the project or with a nail or any 
other sharp objects, as  this may scratch the 
surface.  
   
To clean the interior of the projector 
For cleaning the interior o f the...