Samsung Projector Sp P400b User Manual
Here you can view all the pages of manual Samsung Projector Sp P400b User Manual. The Samsung manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 11
1.POWER Button ( ) 2.SOURCE Button 3. MENU Button( ) 4.Move( )/ ( )Button 5.VERTICAL KEYSTONE Button ( ) 6.INSTALL Button 7. STANDARD Button 8. P.SIZE Button 9. QUICK Button 10. MUTE Button ( ) 11.RETURN Button( ) 12.EXIT Button 13. VOL Button ( ) 14. STILL Button 15. MONITOR Button 16. P.MODE Button 17. MOVIE Button 1. POWER Button ( ) Use this button for turnin g the product on and off. 2. SOURCE Button Used to check or select the connection status of external devic es. 3. MENU...
Page 12
Used to make Menu Screen disappear. 13. VOL Button ( ) Adjusts the audio volume. 14. STILL Button Used to see still images. 15. MONITOR Button Used to set the projector to the optimal mode when used as a mo nitor. 16. P.MODE Button Used to select Picture Mode. 17. MOVIE Button Use this when the surroundings are dark. | Product Features | Product Views | Remote Control | Product Specifications | Design and specifications of the product may be modified withou t...
Page 13
exceed the maximum number of bad pixels set by our standards. Rarely, non-displayable pixels may exist, however it does not affect the picture quality nor the lifespan of the product. Supported Display Modes ResolutionHorizontal Frequency (kHz) Vertical Frequency (Hz) Clock Frequency (MHz) Polarity (Horizontal /Vertical) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667...
Page 14
Picture Position Modes Source Picture Position (H/V) Input Mode Normal Z oom 1 Zoom 2 16:9 VIDEO 576i x x x x 480i x x x x PC 16:9 Mode O x x O 4:3 Mode O x x O
Page 15
| Basic Settings | Connecting the Power | Connecting to video equipment | Installing the Projector Install the projector so that th e beam from the projector is perpendicular to the screen. Place the projector so that the lens is at the center of the sc reen. If the screen is not vertically installed, the picture on the screen may not be a rectangle. Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be...
Page 16
Focus Ring Focus the picture on the screen using the Focus Ring. If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection Distance ), the focus cannot be adjusted correctly. Leveling with Adjustable Feet For level placing of the project or, adjust the Adjustable Feet of the projector. You may adjust the level of th e projector up to 3 degrees. Depending on the position of the projector, Keystone...
Page 17
Setting up the PC Environment - Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Windows desktop and click on [Properties]. tab will appear. 2. Click on [Settings] tab and set the by referring to described in the display mode table supported by this projector. You do not have to change setup. 3. Press the [Advanced] button. Another property window will appear. 4. Click on [Monitor] tab and set the by referring...
Page 18
Process might vary depe nding on the type of computers or Window s versions. (For example, [Properties] appear s instead of [Properties (R)] as shown in 1.) This appliance supports up to 32 bits per pixel in Color quality when it is used as a PC monitor. Projected images may differ from the monitor depending on monit or manufacture or Windows versions. When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If no t, there may...
Page 19
- Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable. - Connect the [ ] input port of the projector to the Audio (L), Audio (R) output ports of the external device, such as a DVD, VCR or ca mcorder using an audio cable. When the connections are all comp leted, connect both power cables of the projector and the DVD, VCR, or camcorder. Using the Projector Turn on the projector, press the [SOURCE] button and...
Page 20
Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. When connections are all comple ted, connect both power codes of the projector and the PC. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable. This product supports plug and p lay and therefore, if you use Window XP you do not need to setup the driver on your PC. Using the Projector Turn on the...