Home > Samsung > Projector > Samsung Projector Sp P400b User Manual

Samsung Projector Sp P400b User Manual

Here you can view all the pages of manual Samsung Projector Sp P400b User Manual. The Samsung manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 1


				            

Page 2

 
To avoid injuries or damage to property, please read the following precautions carefully and use the product 
accordingly. 
Failure to follow the instructions marked with this symbol may  cause personal injury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.    
 
 
|  Power Related  | Installation Related  | Cleaning and Use Related  | 
    
 
  
  [The images here are for refere nce only, and are not...

Page 3

To disconnect the apparatus from the mains, the plug must be pulled out from the 
mains socket, therefore the main s plug shall be readily operable. 
zThere is a danger of ele ctric shock or fire.  
 
  
Always unplug the unit by holding the power plug. Pulling the p ower cable may 
damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of ele ctric shock or fire.  
  
 
 
 |  Power Related | Installation Related | Cleaning and...

Page 4

  Do not install on an unstable lo cation, or on a stand smaller than the product. 
zMake sure to keep the product out of the reach of children.  
The product may fall and cause personal injury. 
  
In case of thunder/lightning, di sconnect the power cord from the wall outlet. 
zThere is a danger of ele ctric shock or fire.  
 
  
Make sure the product's vents are  not blocked by a table cloth or curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on th e...

Page 5

zThis may cause electric shock or fire.  
If water or an alien substance enters the product, turn the product off, 
disconnect the power  cord from a wall outlet and contact a Service Center.  
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a  Service Center.  
  
Do not use or keep the product nea r flammable sprays or other such substances. 
zThere is a danger of f ire or explosion.  
  
Do not place containers with water, vases, drinks,...

Page 6

When cleaning the product, disconnect the power cord and wipe the product using 
a soft dry cloth.  
zDo not use any chemicals such as wax, benzene, alcohol, thinner s, 
insecticide, air freshener, lubricant or detergent.  
   When not using the product for an extended period of time, disc onnect the power 
plug. 
zOtherwise, this may cause heat emission from the accumulated di rt or 
degraded insulation, leading to electric shock or fire.  
  Do not install the product in places with heavy dust,...

Page 7

 
 
 |  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
 High Mobility Design 
 
  - Small Size.  
- Lightweight.
  
 
 Next Generation Backlight Light Source, LED Lamp 
 
  - Effective energy saving by using low voltage. 
- Semi-permanent long lifetime guaranteed. 
  
   
   
 
 
 
|  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
  Front/Upper Side 
 
  
  
1.  Indicators 
  
  
6. Move/Select/Volume button   

Page 8

 
 
 
 
 
   
- TEMP (Red LED)  
- STAND BY (Blue LED) 
※ Refer to the  LED Indications. 
  
2.  Lens cover 
  
3-1. Adjustable Feet 
You can adjust the scr een position by moving 
the adjustable feet up and down. 
  
3-2. The holes to hold the tripod
  
4.  Lens 
  
5.  Focus Ring 
Used for Focus Adjustment. 
  
  /   : Use this button to move to or 
select an item within a menu. 
 : Use this button to adjust the volume. 
  
7. MENU Button  
Use this button to enter or exit a menu or to move 
forward in...

Page 9

 
 
 
 
 
 
 
 LED Indications   
 
:Light is On     :Light is Blinking     :Light is Off
STAND BY  TEMP  Information 
This state occurs when power is  supplied to the projector normally after the POWER button on the 
projector or the  remote control has been pressed.
- This state appears when the pro jector is preparing an operation after the POWER button on the 
projector or the  remote control  has been pressed.
- The POWER button is pressed to turn off the projector, and the  cooling system is in...

Page 10

 
 
 
  
  
  
  
  
  
  
  
  
  
  
 
  
1. VIDEO IN Input port  
  
2. VIDEO/PC AUDIO IN Input ports 
  
3. Remote Control Signal Receiver  
  
4. POWER Input port 
     
5.Kensington Lock  
  
6. PC IN Input port  
  
7. SERVICE Input port  
  
8. Headphone Input port  
 
 
 
  |  Product Features | Product Views | Remote Control | Product Specifications | 
 
 
 
  
Start reading Samsung Projector Sp P400b User Manual

Related Manuals for Samsung Projector Sp P400b User Manual

All Samsung manuals