Samsung Projector Sp P400b User Manual

							 
To avoid injuries or damage to property, please read the following precautions carefully and use the product 
accordingly. 
Failure to follow the instructions marked with this symbol may  cause personal injury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.    
 
 
|  Power Related  | Installation Related  | Cleaning and Use Related  | 
    
 
  
  [The images here are for refere nce only, and are not applicable in all cases (or countries).]
 
   Insert the power plug firmly so that it does not come loose. 
zWhen the connection is not firm, it may cause a fire.  
  Do not use loose power outlets  or damaged power cables. 
zThere is a danger of electric shock or fire.  
  
Under no circumstances touch the power plug with wet hands. 
zThere is a danger of electric shock.  
  Do not plug multiple devices into a single wall outlet.  
zThere is a danger of fire.  
  
Do not bend the power cord excessively or place heavy objects o n it. 
zThere is a danger of ele ctric shock or fire.  
 Before moving the product, make s ure the power is off and remove the power cord 
from the wall outlet. In addition, make sure all connection cab les are disconnected 
from other devices before moving it. 
zMoving the product without disco nnecting the power cord may damage the 
power cord and cause elec tric shock or fire.  
   
						

							To disconnect the apparatus from the mains, the plug must be pulled out from the 
mains socket, therefore the main s plug shall be readily operable. 
zThere is a danger of ele ctric shock or fire.  
 
  
Always unplug the unit by holding the power plug. Pulling the p ower cable may 
damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of ele ctric shock or fire.  
  
 
 
 |  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
 
  TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAME S 
AWAY FROM THIS PRODUCT AT ALL TIMES.  
zThere is a danger of fire.  
  
When installing the product in a  cabinet or on a shelf, make sure the front end of 
the base does not protrude. 
zDropping the product may dam age it or cause injury.  
  
Keep the power cord away from heaters. 
zThe coating of the pow er cord may melt and cause electric shock  or fire.  
  
Do not install the product in lo cations exposed to oil, smoke,  moisture or water 
(rainwater), or in a vehicle. 
zThere is a danger of ele ctric shock or fire.  
  
Do not install the product in locations with poor ventilation s uch as a bookshelf, 
closet, etc.  
zAn increase in the internal te mperature may cause a fire.   
						

							  Do not install on an unstable lo cation, or on a stand smaller than the product. 
zMake sure to keep the product out of the reach of children.  
The product may fall and cause personal injury. 
  
In case of thunder/lightning, di sconnect the power cord from the wall outlet. 
zThere is a danger of ele ctric shock or fire.  
 
  
Make sure the product's vents are  not blocked by a table cloth or curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on th e ground carefully. 
zDoing so may cause damage or injury.  
  
Do not drop the product while carrying it. 
zDoing so may cause damage or injury.  
  Keep the product out of children’s reach. 
zMake sure to keep the product out of the reach of children.  
The product may fa ll and cause personal injury. 
  
 
 
 
|  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
  
 Do not insert metal items, such as chopsticks, steel wire, giml ets, or inflammable 
objects such as matches or pape r into the product through the ventilating openings 
and the PC/Video and power terminals.   
						

							zThis may cause electric shock or fire.  
If water or an alien substance enters the product, turn the product off, 
disconnect the power  cord from a wall outlet and contact a Service Center.  
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a  Service Center.  
  
Do not use or keep the product nea r flammable sprays or other such substances. 
zThere is a danger of f ire or explosion.  
  
Do not place containers with water, vases, drinks, chemicals, s mall metal parts or 
heavy objects on the product. 
zIf water enters the product, it m ay cause electric shock, or fire and when 
heavy objects fall, it may cause injury.  
   Do not let children place objects such as toys or cookies on th e product. 
zIf a child tries to reach for any of these objects, the product  may fall and 
cause harm.  
   Do not look directly at the ligh t of the lamp nor project the picture onto eyes. 
zThis is dangerous espe cially for children.  
  
When you remove batteries from the remote, be careful that they  are not swallowed 
by children. Keep batteries ou t of the reach of children. 
zIf swallowed, see a doctor immediately.  
 
  
If the product emits smoke, unus ual noise, or there is a burning smell,disconnect 
the power plug immediately, and contact a  Service Center. 
zThere is a danger of ele ctric shock or fire.  
  
If the power plug pin  or jack is exposed to dust, water or alie n substances, clean it 
thoroughly. 
zThere is a danger of ele ctric shock or fire.  
   
						

							When cleaning the product, disconnect the power cord and wipe the product using 
a soft dry cloth.  
zDo not use any chemicals such as wax, benzene, alcohol, thinner s, 
insecticide, air freshener, lubricant or detergent.  
   When not using the product for an extended period of time, disc onnect the power 
plug. 
zOtherwise, this may cause heat emission from the accumulated di rt or 
degraded insulation, leading to electric shock or fire.  
  Do not install the product in places with heavy dust, chemical  substances, high or 
low temperatures, high humidity, or where it will be operated f or a long period 
continuously etc.  
  
If the product is dropped or the  casing is damaged, turn the product off and unplug 
the power cord.  
zThis may cause electric shock or fire. Contact a  Service Center.  
  
Make sure to place your remote control on a table or desk.  
zIf you step on the remote control, you may fall and hurt yourse lf or the 
product may be damaged.  
Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment) - Europe only 
(Applicable in the European Union  and other European countries with separate collection 
systems)  
 
This marking shown on the product or its literature, indicates  that it should not be 
disposed with other household wa ste at the end of its working life. To prevent possible 
harm to the environment or damag e to health from uncontrolled waste disposal, please 
separate this from other types of waste and recycle it responsi bly to promote the 
sustainable reuse of material resources. 
 
Household users should contact ei ther the retailer where they purchased this product, or 
their local government office, fo r details of where and how they can take this item for 
environmentally safe recycling.  
 
Business users should contact the ir supplier and check the terms and conditions of the 
purchase contract. This product s hould not be mixed with other commercial wastes for 
disposal.  
						

							 
 
 |  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
 High Mobility Design 
 
  - Small Size.  
- Lightweight.
  
 
 Next Generation Backlight Light Source, LED Lamp 
 
  - Effective energy saving by using low voltage. 
- Semi-permanent long lifetime guaranteed. 
  
   
   
 
 
 
|  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
  Front/Upper Side 
 
  
  
1.  Indicators 
  
  
6. Move/Select/Volume button   
						

							 
 
 
 
 
   
- TEMP (Red LED)  
- STAND BY (Blue LED) 
※ Refer to the  LED Indications. 
  
2.  Lens cover 
  
3-1. Adjustable Feet 
You can adjust the scr een position by moving 
the adjustable feet up and down. 
  
3-2. The holes to hold the tripod
  
4.  Lens 
  
5.  Focus Ring 
Used for Focus Adjustment. 
  
  /   : Use this button to move to or 
select an item within a menu. 
 : Use this button to adjust the volume. 
  
7. MENU Button  
Use this button to enter or exit a menu or to move 
forward in a menu.  
  
8. SOURCE Button  
Use this button to select the external device 
signal. 
  
9. POWER( ) Button  
Used to turn the projector on or off. 
  
The buttons on the top of the p rojector are touch buttons.  
Touch them lightly with your fingers to use them. 
When using a tripod, make sure to  use one with a screw length of 5.5 mm or less.  
If the screw length is longer th an 5.5 mm, you will not be able  to fix the projector to the tripod firmly, which 
may result in damage to th e projector or tripod.  
 Package Contents   
 
 
 
Quick Installation Guide  Warranty  
(Not available in all locations)  User Manual CD  
 
 
 
  
Power Cable  Remote Control/ 1 Batteries  Cleaning Cloth 
   
   
 
 
Adapter  D-Sub Cable 
   
   
 
 
  
						

							 
 
 
 
 
 
 
 LED Indications   
 
:Light is On     :Light is Blinking     :Light is Off
STAND BY  TEMP  Information 
This state occurs when power is  supplied to the projector normally after the POWER button on the 
projector or the  remote control has been pressed.
- This state appears when the pro jector is preparing an operation after the POWER button on the 
projector or the  remote control  has been pressed.
- The POWER button is pressed to turn off the projector, and the  cooling system is in operation to cool 
off the inside of the projector.
- This is the state where the product is turned off automaticall y since there was no signal input while a 
PC cable was connected. 
The projector is in norm al operating condition. 
Refer to Action 1 below if the c ooling fan inside the projector is not in normal operation condition.
Power is turned off automatically when temperature inside of th e projector goes beyond the control limit. 
Refer to Action 2.
This state occurs when the auto color compensation function has  an error. Refer to Action 3.
  
  
  
  
  
    Clearing Indi cator Problems   
 
Classification  State  Measures 
Action 1 When the cooling fan sy
stem is not in normal 
operating condition. If the symptom remains even af
ter disconnecting and then 
reconnecting the power cord an d turning the projector on 
again, contact your product provider or our  service center. 
Action 2 When temperature inside of the projector becomes 
too high. Adjust the installation state of your projector by referring to
 
the Installation Precautions  section listed above. Cool 
down your projector sufficientl y and then operate it again. 
If the same problem occurs continually, contact your 
product distributor or  service center. 
Action 3 When the sensor system inside the projector is not 
operating normally.  Cool your projector down suff
iciently and then operate it 
again. If the same problem o ccurs again, contact your 
product distributor or  service center.
This Projector uses a cooling fa n system to keep the unit from overheating. Operation of the cooling fan may 
cause noise, which does not affect the product performance and  is part of normal operation. 
 
 
 
  Rear Side 
  
						

							 
 
 
  
  
  
  
  
  
  
  
  
  
  
 
  
1. VIDEO IN Input port  
  
2. VIDEO/PC AUDIO IN Input ports 
  
3. Remote Control Signal Receiver  
  
4. POWER Input port 
     
5.Kensington Lock  
  
6. PC IN Input port  
  
7. SERVICE Input port  
  
8. Headphone Input port  
 
 
 
  |  Product Features | Product Views | Remote Control | Product Specifications |