Samsung Projector Sp L300 User Manual

 
 
 
 Connecting an External Monitor 
 
 
 
 
 
You can view an image on both your projector and a separate mon itor at the same time. 
 
Check that your PC and projector are turned off.
Connect the [PC IN 1] terminal at the back of the projector to the D-Sub terminal of your PC using a D-Sub cable. 
Connect the [PC OUT] terminal of the projector to the D-Sub terminal of a monitor using a D-Sub cable. 
  - When connecting a monitor using the [PC OUT] function, make  sure to connect your PC to the [PC IN...

 
 
 
First, check that the AV device and your projector are turned o
ff. 
Connect the [HDMI/DVI IN] terminal at the back of the projector  to the DVI output terminal of the digital output device using 
an HDMI/DVI cable. 
  - When connecting to the HDMI output terminal of the digital o utput device, use an HDMI cable. 
  - For the supported input signals, refer to  "AV Timing(HDMI)". 
Connect the [PC 1/DVI AUDIO IN] terminal of the projector to th e Audio out terminal of your digital output...

 
  
 
 
 
First, check that the AV device and your projector are turned o ff. 
Connect the [PC IN (1 or 2)] terminal at the back of the projec tor to the Component terminal of your AV device using a D-
Sub/Component cable (Not supplied). 
  - For supported input signals, refer to the  "AV Timing(D-Sub)".  
Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the  back of the projector and the Audio out terminal of your 
AV device using an audio cable (Not supplied). 
 
 Connecting using a...

 Connecting an External Speaker
 
 
 
 
 
You can hear sound through an external speaker instead of the i nternal speaker embedded in the projector.  
Prepare an audio cable (Not supplied) suitable for your external speaker. 
Connect the [AUDIO OUT] terminal of the projector to the extern al speaker using an audio cable. 
  - When using an external speaker, the internal speaker does no t operate but you can adjust the volume of the external 
speaker using the Volume button of the projector (or remote con...

 
 
 |  Basic Functions | Input | Picture | Setup | Option | 
 
 
 
 
Turning on the projector  
   Check that the lens cover is opened completely. 
 Turn the power on. 
 Check that the STAND BY LED indicator is turned on. 
 Press the Power button. While the power is turned on (with the
 Power button on the remote control or at the 
    top of the projector), the blue LAMP LED indicator blinks.   
    When the power is turned on completely, the LAMP LED indica tor remains blue. 
If the projector is...

 
 
Screen 
Adjustment  Description  Play/Stop 
Source List  You can select a device connected  to the projector to display. 
  1) PC 1   4) S-Video 
2) PC 2  5) HDMI
3) AV   
Edit NameYou can edit the names of device s connected to the projector. 
  1) VCR  7) DVD Receiver
2) DVD   8) Game
3) Cable STB   9) Camcorder
4) HD STB  10) DVD Combo 
5) Satellite STB  11) PC
6) AV Receiver    
 
 
 
|  Basic Functions | Input | Picture | Setup | Option | 
 
 
* Click the Play( )/Stop( ) button in the table...

 ▶ Presentation and Text modes are only enabled if the input sig
nal is a PC Timing(D-
Sub/HDMI) signal.
2) Contrast  : Used to adjust the contrast between the object and the backgr ound. 
3) Brightness  : Used to adjust brightness of the entire picture.
4) Sharpness  : Used to adjust the sharpness of the picture.
▶ When the input signal is  PC Timing(D-Sub/HDMI), the Sharpness cannot 
be adjusted.  
5) Color  : Used to adjust color lighter or darker.
▶ When the input signal is  PC Timing(D-Sub/HDMI),...

Film Mode Using this function, you can set the display mode optimized for  playing movies. 
 
▶  Film Mode can only be supported for the [AV], [S-Video], 480i,  and 576i signals.  
1) Off 
2) On 
PC
Eliminates or reduces noise that causes unstable screen quality , such as screen 
shaking. If the noise is not removed using Fine Adjustment, adj ust the frequency to the 
maximum and then perform Fine Adjustment again.  
▶  It is only enabled for the PC Timing input of the D-Sub termina l. 
▶  Refer to...

 4) Rear-Ceiling  : Vertically Reversed Image
Lamp Mode  Used to set the image brightness by adjusting the amount of lig ht generated by the 
lamp.  
 
  1) Eco  : This mode is optimized for small screens smaller than 100 inc hes.  
This mode decreases the lamp brightness and power consumption i n order to 
extend the lamp lifetime and reduce noise and power consumption .
  2) Normal  : This mode is optimized for general use. This mode is the rec ommended 
mode for a stable lamp brightness that enables a...

 
 
2) Reset Filter Time : Resets the filter time. 
   
Reset 
Filter Time
 
 
  |  Basic Functions | Input | Picture | Setup | Option | 
 
 
* Click the Play( )/Stop( ) button in the table below to view the  video file. 
Screen 
Adjustment  Description 
Play/Stop 
Language You can select the Language used for the menu screen. 
 
Menu Option
1) Position
You can move Menu Position up/down/left/right.  
 
2) Transparency
You can set the translucency of menu. 
- Low  
- Medium 
-  High  
- Opaque 
 
3)...