Samsung Projector Sp L300 User Manual

 
To avoid injuries or damage to property, please read the following precautions carefully and use the product 
accordingly. 
Failure to follow the instructions marked with this symbol may cause personal injury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.   
 
 
| 
Power Related | Installation Related | Cleaning and Use Related | 
    
 
  
  [The images here are for reference only, and are not applicable...

 
  Always unplug the unit by holding the power plug. Pulling the p ower cable may 
damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of electric shock or fire.  
  
 
 
 |  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
 
  
TO PREVENT THE SPREAD OF FIRE, K EEP CANDLES OR OTHER OPEN FLAME S 
AWAY FROM THIS PRODUCT AT ALL TIMES. 
zThere is a danger of fire.  
   When installing the product in a...

zIf the product falls it may harm children. Install on a flat and stable location 
as the front part is heavy.  
  In case of thunder/lightning, di sconnect the power cord from th e wall outlet. 
zThere is a danger of electric shock or fire.  
 
  
Make sure the product's vents are not blocked by a table cloth  or curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on the ground carefully. 
zDoing so may cause damage or injury.  
  Do not drop the product while...

zThere is a danger of fire or explosion.  
  Do not place containers with water, vases, drinks, chemicals, s mall metal parts or 
heavy objects on the product. 
zIf water enters the product, it may cause electric shock, or fi re and when 
heavy objects fall, they may cause injury.  
   Do not let children place objects such as toys or cookies on th e product. 
zIf a child tries to reach for any of these objects, the product may fall and 
cause harm.  
  
Do not look directly at the light of the lamp nor...

  If the product is dropped or the casing is damaged, turn the pr oduct off and unplug 
the power cord.  
zThis may cause electric shock or fire. Contact a  Service Center.  
  
Use only specified standard batteries. Do not use new and used  batteries together. 
zIncorrect polarity may cause a battery to break or leak and cou ld lead to 
fire, injury, or contamination (damage).  
   Make sure to place your remote control on a table or desk.  
zIf you step on the remote control, you may fall and hurt...

 
 
 |  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
 
 
 
 
 An optical engine adoptin
g new LCD technology  
 
  - 1024 x 768 panel ha
s been adapted.  
- Utilizing a 3P-LCD panel.  
- Provides a bright screen of 3000 lumen. 
- Compact size, lightweight, and good portability   
 
 Minimized fan noise  
 
  - Minimizes the noise generated by the product’s fan by optimiz
ing the internal air flow and the fan 
installation structure.   
 
 Various input...

 
 
 
 
 
 
  
  
1. Indicators 
- STAND BY (Blue LED) 
- LAMP (Blue LED) 
- TEMP (Red LED) 
※ Refer to the  LED Indications. 
  
2. VOL - / + & Select and Move Button 
Adjusts the volume. 
Use this button to move to or select an item 
within a menu. 
  
3. MENU Button 
Use this button to enter or exit a menu or to move 
forward in a menu.  
  
4. SOURCE Button  
Used to select input signals from the external 
sources. 
     
  
5.
POWER( ) Button  
Used to turn the projector on or off.  
  
6. Lens...

  
D-Sub Cable       
  
   
 
 
 
   LED Indications   
 
●:Light is On    ◐:Light is Blinking    ○:Light is Off
STAND 
BY  LAMP  TEMP 
Information 
●○ ○ If you press the POWER button on the remote control or projector, the screen 
appears within 30 seconds.
● ● ○ The projector is in normal operating condition. 
●◐ ○ This state appears when the projector is preparing an operation
 after the POWER button 
on the projector or the remote control has been pressed.
○◐ ○ The POWER button is pressed to turn...

 
 
 
 
 
 
Action 3 cover is not open 
completely.  both the video and audio are turned off automatically. 
If this status persists for ten minutes, the projector is turne
d off 
automatically. 
Action 4  This indicates that it has 
changed to Cooling mode, 
because the internal 
temperature of the projector has 
increased beyond the 
maintenance limit.   If the internal temperature of the projector has increased beyo
nd the 
maintenance limit, it is changed to Cooling mode before it is t urned 
off...