Samsung Projector Sp L300 User Manual

							 
To avoid injuries or damage to property, please read the following precautions carefully and use the product 
accordingly. 
Failure to follow the instructions marked with this symbol may cause personal injury or even fatality.  
Failure to follow the instructions marked with this symbol may cause personal injury or damage to the 
product or property.   
 
 
| 
Power Related | Installation Related | Cleaning and Use Related | 
    
 
  
  [The images here are for reference only, and are not applicable in all cases (or countries).]
 
  
Insert the power plug firmly so that it does not come loose. 
zWhen the connection is not firm, it may cause a fire.  
   Do not use loose power outlets or damaged power cables. 
zThere is a danger of electric shock or fire.  
  Under no circumstances touch the power plug with wet hands. 
zThere is a danger of electric shock.  
  Do not plug multiple devices into a single wall outlet.  
zThere is a danger of fire.  
  
Do not bend the power cord excessively or place heavy objects o n it. 
zThere is a danger of electric shock or fire.  
 Before moving the product, make sure the power is off and remov e the power cord 
from the wall outlet. In additio n, make sure all connection cab les are disconnected 
from other devices before moving it. 
zMoving the product without disconnecting the power cord may damage the 
power cord and cause electric shock or fire.  
   To disconnect the apparatus from the mains, the plug must be pu lled out from the 
mains socket, therefore the mains plug shall be readily operabl e. 
zThere is a danger of electric shock or fire.   
						

							 
  Always unplug the unit by holding the power plug. Pulling the p ower cable may 
damage the inside of it.  
zThere is a danger of fire.  
  
Unplug the power plug before cleaning the product. 
zThere is a danger of electric shock or fire.  
  
 
 
 |  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
 
  
TO PREVENT THE SPREAD OF FIRE, K EEP CANDLES OR OTHER OPEN FLAME S 
AWAY FROM THIS PRODUCT AT ALL TIMES. 
zThere is a danger of fire.  
   When installing the product in a  cabinet or on a shelf, make sure the front end of 
the base does not protrude. 
zDropping the product may damage it or cause injury.  
   Keep the power cord away from heaters. 
zThe coating of the power cord may melt and cause electric shock  or fire.  
  
Do not install the product in locations exposed to oil, smoke,  moisture or water 
(rainwater), or in a vehicle. 
zThere is a danger of electric shock or fire.  
   Do not install the product in locations with poor ventilation s uch as a bookshelf, 
closet, etc.  
zAn increase in the internal temperature may cause a fire.  
  
Do not install on an unstable location, or on a stand smaller t han the product.  
						

							zIf the product falls it may harm children. Install on a flat and stable location 
as the front part is heavy.  
  In case of thunder/lightning, di sconnect the power cord from th e wall outlet. 
zThere is a danger of electric shock or fire.  
 
  
Make sure the product's vents are not blocked by a table cloth  or curtain. 
zAn increase in the internal temperature may cause a fire.  
  
Place the product on the ground carefully. 
zDoing so may cause damage or injury.  
  Do not drop the product while carrying it. 
zDoing so may cause damage or injury.  
  Keep the product out of children’s reach. 
zIf the product falls it may cause harm to children. Install on  a flat and 
stable location as the front part is heavy.  
    
 
 
|  Power Related | Installation Related | Cleaning and Use Related | 
 
 
 
  
 Do not insert any metal objects s uch as a fork, chopsticks, wires, gimlets, or 
inflammable objects such as paper into the vents, the PC/COMPOS ITE port, the 
Power port or the Battery port. 
zThis may cause electric shock or fire.  
If water or an alien substance enters the product, turn the pro duct off, 
disconnect the power cord from a wall outlet and contact a  Service Center. 
 
  
Do not disassemble, or attempt to fix or modify the product. 
zWhen the product requires repairs, contact a  Service Center.  
  
Do not use or keep the product near flammable sprays or other s uch substances.  
						

							zThere is a danger of fire or explosion.  
  Do not place containers with water, vases, drinks, chemicals, s mall metal parts or 
heavy objects on the product. 
zIf water enters the product, it may cause electric shock, or fi re and when 
heavy objects fall, they may cause injury.  
   Do not let children place objects such as toys or cookies on th e product. 
zIf a child tries to reach for any of these objects, the product may fall and 
cause harm.  
  
Do not look directly at the light of the lamp nor project the p icture onto eyes. 
zThis is dangerous especially for children.  
  
When you remove batteries from the remote, be careful that they  are not swallowed 
by children. Keep batteries out of the reach of children.  
zIf swallowed, see a doctor immediately.  
 
  
If the product emits smoke, unusual noise, or there is a burning smell,disconnect 
the power plug immediately, and contact a  Service Center. 
zThere is a danger of electric shock or fire.  
  
If the power plug pin or jack is exposed to dust, water or alie n substances, clean it 
thoroughly. 
zThere is a danger of electric shock or fire.  
   When cleaning the product, discon nect the power cord and wipe the product using 
a soft dry cloth.  
zDo not use any chemicals such as wax, benzene, alcohol, thinner s, 
insecticide, air freshener, lubricant or detergent.  
   When not using the product for an extended period of time, disc onnect the power 
plug. 
zOtherwise, this may cause heat emission from the accumulated di rt or 
degraded insulation, leading to electric shock or fire.  
  Do not install the product in places with heavy dust, chemical  substances, high or 
low temperatures, high humidity, or where it will be operated f or a long period 
continuously etc.   
						

							  If the product is dropped or the casing is damaged, turn the pr oduct off and unplug 
the power cord.  
zThis may cause electric shock or fire. Contact a  Service Center.  
  
Use only specified standard batteries. Do not use new and used  batteries together. 
zIncorrect polarity may cause a battery to break or leak and cou ld lead to 
fire, injury, or contamination (damage).  
   Make sure to place your remote control on a table or desk.  
zIf you step on the remote control, you may fall and hurt yourself or the 
product may be damaged.  
Correct Disposal of This Product 
(Waste Electrical & Electronic Equipment) - Europe only 
(Applicable in the European Union and other European countries with separate collection 
systems) 
 
This marking shown on the product or its literature, in dicates that it should not be disposed with other 
household waste at the end of its wo rking life. To prevent possible harm to the environment or damage to 
health from uncontrolled waste disposal, please separa te this from other types of waste and recycle it 
responsibly to promote the sustainable reuse of material resources. 
 
Household users should contact eith er the retailer where they purchased this product, or their local 
government office, for details of where and how they ca n take this item for environmentally safe recycling.  
 
Business users should contact their  supplier and check the terms and conditions of the purchase contract. 
This product should not be mixed with other commercial wastes for disposal. 
Correct disposal of batteries in  this product - Europe only 
(Applicable in the European Union and other European countries with separate battery return 
systems.) 
This marking on the battery, manual  or packaging indicates that the batteries in this product should not be 
disposed of with other household waste at the end of th eir working life. Where marked, the chemical 
symbols 
Hg, Cd or Pb indicate that the battery contains merc ury, cadmium or lead above the reference 
levels in EC Directive 2006/66. If batteries are not prop erly disposed of, these substances can cause harm to 
human health or the environment.  
To protect natural resources and to promote material re use, please separate batteries from other types of 
waste and recycle them through your local, free battery return system.  
						

							 
 
 |  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
 
 
 
 
 An optical engine adoptin
g new LCD technology  
 
  - 1024 x 768 panel ha
s been adapted.  
- Utilizing a 3P-LCD panel.  
- Provides a bright screen of 3000 lumen. 
- Compact size, lightweight, and good portability   
 
 Minimized fan noise  
 
  - Minimizes the noise generated by the product’s fan by optimiz
ing the internal air flow and the fan 
installation structure.   
 
 Various input terminals  
 
  - Increases the connectivity to peripherals by providing variou
s terminals, such as HDMI (DVI PC 
signal, supported), 2 D-Sub 15p, S-Video, and Video terminals.    
 
 Audio Output  
 
  - There are two stereo speakers on the right and left and a 5-band equalizer is supported. 
  
 
 User adjustments  
 
  - This unit allows adjustment of each input port. 
- The unit has a reference pattern that can be used for positio
ning and adjustment.
  
   
   
 
 
  |  Product Features | Product Views  | Remote Control  | Product Specifications  | 
 
 
 
 
  Front/Upper Side 
  
						

							 
 
 
 
 
 
  
  
1. Indicators 
- STAND BY (Blue LED) 
- LAMP (Blue LED) 
- TEMP (Red LED) 
※ Refer to the  LED Indications. 
  
2. VOL - / + & Select and Move Button 
Adjusts the volume. 
Use this button to move to or select an item 
within a menu. 
  
3. MENU Button 
Use this button to enter or exit a menu or to move 
forward in a menu.  
  
4. SOURCE Button  
Used to select input signals from the external 
sources. 
     
  
5.
POWER( ) Button  
Used to turn the projector on or off.  
  
6. Lens  
  
7. Remote Control Signal Receiver  
  
8. Focus Ring  
Used for Focus Adjustment. 
  
9. Zoom Knob 
Used to enlarge or reduce image size.
  
10.Lens cover 
 Unpacking   
 
 
Quick Installation Guide  Warranty Card/ Registration Card 
(Not available in all locations)  User Manual CD  
 
 
 
   
						

							  
D-Sub Cable       
  
   
 
 
 
   LED Indications   
 
●:Light is On    ◐:Light is Blinking    ○:Light is Off
STAND 
BY  LAMP  TEMP 
Information 
●○ ○ If you press the POWER button on the remote control or projector, the screen 
appears within 30 seconds.
● ● ○ The projector is in normal operating condition. 
●◐ ○ This state appears when the projector is preparing an operation
 after the POWER button 
on the projector or the remote control has been pressed.
○◐ ○ The POWER button is pressed to turn off the projector, and the 
cooling system is in 
operation to cool off the inside of the projector. (Operates fo r about 30 seconds.)
◐○ ◐ Refer to Action 1 below if the cooling fan inside the projector is not in normal operation 
condition.
○◐ ◐ Refer to Action 2 below if the lamp cover protecting the lamp u
nit is not closed 
properly.
● ◐ ◐ This indicates that the lens cover does not open completely. Refer to Action 3 below. 
●● ◐ This indicates that it has changed to Cooling mode, because the
 internal temperature 
of the projector has increased beyond the maintenance limit. 
Refer to Action 4 below. 
○○ ◐ This indicates that the power is turned off automatically becau
se the internal 
temperature of the projector has increased beyond the maintenan ce limit. Refer to 
Action 5 below
◐ ◐ ◐ A problem has occurred with the operation of the lamp. Refer  to Action 6.
● ◐ ● The lifetime of the lamp has expired. Refer to Action 7.
◐ ◐ ● The power for the product is not operating normally. Contact  a service center .
  
  
    Clearing Indicator Problems   
 
Classification State  Measures 
Action 1  When the cooling fan 
system is not in normal 
operating condition. If the symptom remains even after disconnecting and then 
reconnecting the power cord and turning the projector on again,
 
contact your product provider or our  service center. 
Action 2  When the lamp cover 
protecting the lamp unit is 
not properly closed or the 
sensor system is not in 
normal operating 
condition. Check if the screws on the side of the projector are correctly 
locked, 
and if they are locked normally, contact your product distribut or or a 
service center . 
The status that the lens  Open the lens cover completely. 
If the lens cover is not open completely while operating the pr
ojector, 
Power Cable Remote Control/ 1 Batteries (CR2025)  
(Not available in all locations)  Cleaning Cloth 
   
    
						

							 
 
 
 
 
 
Action 3 cover is not open 
completely.  both the video and audio are turned off automatically. 
If this status persists for ten minutes, the projector is turne
d off 
automatically. 
Action 4  This indicates that it has 
changed to Cooling mode, 
because the internal 
temperature of the projector has 
increased beyond the 
maintenance limit.   If the internal temperature of the projector has increased beyo
nd the 
maintenance limit, it is changed to Cooling mode before it is t urned 
off automatically.  
* Cooling mode: The status that the fan speed has increased and  the 
lamp of the projector has been changed to ECO mode by force. 
Check whether the ventilating hole of the projector is blocked.   
Check whether the air filter is blocked. Clean it if it is bloc ked. 
Check whether the surrounding temperature of the projector is h igher 
than the standard temperature range of the projector. 
Cool the projector sufficiently  and operate it again. 
Action 5  If the internal temperature of the 
projector increases higher than 
the limit, it is turned off 
automatically.  Check whether the ventilating hole of the projector is blocked.
  
Check whether the air filter is blocked. Clean it if it is bloc ked. 
Check whether the surrounding temperature of the projector is h igher 
than the standard temperature range of the projector. 
Cool the projector sufficiently  and operate it again. 
If the same problem occurs continually, contact your product 
distributor or  service center .  
Action 6  The lamp 
malfunctions after power 
turns off 
abnormally or after 
powering on right after 
turning off the projector. Turn the power off, wait for a sufficient amount of cooling tim
e and 
then turn the power on to operate. If the same problem occurs 
continually, contact your product distributor or  service center. 
Action 7  When the screen becomes 
darker  Check the lamp usage time on the Information Display screen. If
 you 
need to replace the lamp, contact your product distributor or  service 
center .
This Projector uses a cooling fan system to keep the unit from overheating. Operation of the cooling fan may 
cause noise, which does not affect the product performance and is part of normal operation. 
 
 
 
  Rear Side 
 
  
1. PC OUT port  
  
7. [AV IN] VIDEO Input port