Samsung Projector Sp L300 User Manual

 
 
 
 
  
2. AUDIO OUT port  
  
3. HDMI/DVI IN Input port  
  
4. PC 1/DVI AUDIO IN Input port  
  
5. RS-232C port (For service input terminals)  
  
6. [AV IN] R-AUDIO-L Input port  
  
  
8. [AV IN] S-VIDEO Input port 
  
9. PC IN 1,2 Input port  
  
10.[PC IN2] AUDIO Input port 
  
11.Remote Control Signal Receiver 
 
12.POWER Input port 
 
 
 
  |  Product Features | Product Views | Remote Control | Product Specifications | 
 
 
 
 
 
 
 
1.POWER ( ) Button
2.AUTO Button
3. MENU ( ) Button
4.Move...

  
6. INSTALL  Used to flip or reverse the projected image. 
 
7. BLANK   This is used to turn off the video and audio temporarily. 
It is released when any button other than the POWER button is p ressed.  
 
8. P.SIZE  Used to adjust the size of picture screen.  
 
9. QUICK   This is used when quickly selecting the last used menu.  
 
10. MUTE ( ) 
This is used to temporarily mute the sound. 
 
To hear sound again, press the MUTE button again or press the -  VOL + button.  
 
11. RETURN ( ) 
Returns to...

 
Lamp Power 
Consumption 
220W (Normal : 200W, Eco : 152W ) 
Life Time 2,000 Hours (Eco : 2,500 Hours ) 
Input Terminal D-Sub 15p x 2 Analog RGB, analog YPbPr 
HDMI
Digital RGB, digital YCbCr
Mini DIN x 1 S-Video
RCA x 1  Composite video 
Speaker  3W x 2 (Stereo) 
Power  Power 
Consumption 
Max 300 W 
Voltage  100~240V AC, 50/60Hz 
Noise   Eco : 30dB, Normal : 32dB, Bright : 35dB
Dimensions   291(W) x 289(D) x 127(H) 
11.5 inches(W) x 11.4 inches(D) x 5 inches(H)  
Weight   3.9 Kg / 8.6 lb 
User...

 
 
 
 
 
 
 
 
VESA 1280 x 720 70Hz 52.500 70.000 89.040 
VESA 1280 x 720 72Hz 54.072 72.000 91.706 
VESA 1280 x 720 75Hz 56.456 74.777 95.750 
VESA 1280 x 768 60Hz 47.776 59.870 79.500 
VESA 1280 x 768 75Hz 60.289 74.893 102.250 
VESA 1280 x 800 60Hz 49.702 59.810 83.500 
VESA 1280 x 800 75Hz 62.795 74.934 106.500 
VESA 1280 x 960 60Hz 60.000 60.000 108.000 
VESA 1280 x 960 70Hz 69.930 70.000 120.839 
VESA 1280 x 960 72Hz 72.072 72.000 124.540 
VESA 1280 x 960 75Hz 75.231 74.857 130.000 
VESA 1280 x...

 
 
 |  Basic Settings | Connecting the Power | Connecting an External Device  | 
 
 
 
 
 Installing the Projector
 
  Install the projector so that the beam from the projector is p erpendicular to the screen.  
  
Place the projector so that the lens is at the center of the sc reen. 
  If the screen is not vertically installed, the picture on the  screen may not be a rectangle. 
Do not install the screen in bright surroundings. If the screen  is too bright, the picture on the screen will not be...

 
 
 
 
 
 
 
You can adjust the size of image within zoom range by manipulat
ing the 
Zoom Knob. 
Focus the picture on the scr een using the Focus Ring.
  
If your product is installed at a location out of the specified  projection 
distance (refer to  Screen Size and Projection Distance), the focus cannot 
be adjusted correctly.
 
  Leveling with Adjustable Feet  
 
 
 
  For level placing of the projector, adjust the Adjustable Feet  of the projector.
  
The projector can be adjusted to a height of up...

 
 
 
 
 
 
 
 
260
5283.2 3962.4  91067587 660 
270 5486.4 4114.8  94577880 686 
280 5689.6 4267.2  98098173 711 
290 5892.8 4419.6  101608466737 
300 6096.0 4572.0  105128759762 
This projector is designed to show images optimally on a 80 ~ 1 20 inch sized screen.
 
 
 
A. Screen 
Z: Throw Distance
Y': Distance from Lens Center to Image Bottom 
  Setting up the PC Environment  - Check the following items before connecting your PC to your  projector.
 
1. Click the right mouse button on the Windows...

 
 
 4. Click on [Monitor] tab and set the  by 
referring to  described in  the Supported 
Resolution/Size Modes table .  
Set up both the vertical and horizontal frequency instead of 
.
5. Click the [OK] button to close the window, and click the  [OK] button of the  window to close the 
window. 
The computer may restart automatically.  
 
 
   
6. Shut down the PC and connect to the projector.
   
   
Process might vary depending on your type of computer or Window s versions.  
(For example,...

 
 
Connecting a PC using a D-Sub cable 
 
 
 
 
 
Check that your PC and projector are turned off. 
Connect the [PC IN (1 or 2)] terminal at the back of the projec tor to the D-Sub terminal of your PC using a D-Sub cable.
  - For the supported input signals, refer to  "PC Timing(D-Sub/HDMI)".  
Connect the [PC 1/DVI AUDIO IN] or [AUDIO IN 2] terminal at the  back of the projector to the Audio out terminal of your 
PC using an audio cable (Not supplied).
   Connecting a PC using a HDMI/DVI cable...