Samsung ML 6510ND User Manual

							Printing_ 61
Selection .
• Orientation:  Select the direction in which information is printed on a 
pag

e.
• Duplex:  Print on both sides of paper to save paper.
 Automatic/manual duplex printing may not be available 
depending on models. You can alternatively use the lpr printing 
system or other applicatio ns for odd-even printing.
• Multiple pages:  Print several pages on one side of paper.
• Page Border:  Choose any of the border styles (e.g.:  Si
 ngle-line 
hairline , Double-line hairline )
Image tab
In this tab, you can change the brightness, resolution or an image posi -
tion of your document.
Text tab
Set the character margin, line space or  the columns of the actual print 
output.
HPGL/2 tab
• Use only black pen:  To print all graphics in black.
• Fit plot to page:  Fit the entire graphic into a single page.
• Pen Width:  Change value to increase the thickness of pen lines. By 
defau

lt, it is 1000.
Margins tab
• Use Margins:  Set the margins for the document. By default, mar -
gins are not enabled. The user can change the margin settings by 
chan
ging the values in the respective fields. Set by default, these 
values depend on the page size selected.
• Unit:  Change the units to points, inches or centimeters.
Printer-Specific Settings tab
Select various options in the  JCL and  General  frames to customize var -
ious settings. These options are specific to the printer and depend on 
th
 e PPD file.
Downloaded From ManualsPrinter.com Manuals 
						

							Using USB memory device_ 62
7.using usb memory device
This chapter explains how to use a  USB memory device with your machine.
This chapter includes:
•About USB memory device
• Printing from a USB memory device •
Backing up data
• Managing USB memory
  
ABOUT USB MEMORY DEVICE
USB memory devices are available with a variety of memory capacities to 
give you more room for storing do cuments, presentations, music and vid-
eos, high resolution photographs, or whatever other files you want to store 
or move.
Your machine supports USB memory devices with FAT16/FAT32 and sec -
tor size of 512 bytes. 
Check your USB memory device’s file system from your dealer.
You must use only an authorized USB memory device with an A plug type 
co nnector.
AB
Use only a USB memory device with metal-shielded connector.
Only use a USB memory device that has  obtained compatibility certification; 
otherwise, the machine might not recognize it.
Insert a USB memory device into th e US

B memory port on your machine.
 
•Do not remove the USB memory device while it is in use. The 
machine warranty does not cover  damage caused by user’s mis-
use. 
• If yo ur USB memory device has certain features (example, secu -
rity key, 
 security partition, boot ing disk, passwo
 rd settings and so 
forth), do not use the USB memory device with your machine. The 
files stored in the USB memory device may be corrupted, or the 
machine may not automatically det ect it. For details about these 
features, see device’s User’s Guide.
PRINTING FROM A USB MEMORY DEVICE
You can directly print files stored on a USB memory device.
If your USB memory devi ce has certain 
 features (example, security key, 
security partition, booting disk, passwor d settings and so forth), do not use 
the USB memory device with your ma chine. The files stored in the USB 
memory device may be corrupted, or the machine may not automatically 
detect it. For details about these features, see device’s User’s Guide.
Direct Print option supported file types: 
• PRN:  Only files created by provided driver with your machine are com -
patible. PRN files can be created by selecting the  Pr
 int to file check box 
when you print a document. The document will be saved as a PRN file, 
rather than printed on paper. Only PRN files created in this fashion can 
be printed directly from  USB memory device (See  Printing to a file 
(PRN) on page  57 ).
 If you print PRN files created from  other machine, the printout 
would be different.
• BMP:  BMP Uncompressed
• TIFF:  TIF
 F 6.0 Baseline
• JPEG : JPEG Baseline
• PDF:  PDF 1.4 and

 below
• XPS
To print a document from a USB memory device:
1. Insert a USB memory device into  the US
 B memory port on your 
machine.
2. Press  Menu on the control pa
 nel.
3. Press the up/down arrow to highlight  Direc
 t USB and press  OK.
4. Press the up/down arrow to highlight  USB Print and pre
 ss OK .
Your machine automatically detects  the 
 device and reads data stored on 
it.
5. Pre
ss the up/down arrow until the folder  o
 r file you want is highlighted 
and press  OK.
If you see  + in the fro
n
 t of a folder name, there are one or more files or 
folders in the selected folder. 
6. If you selected a file, skip to the next step. 
If yo

u selected a folder, press the up/down arrow until the file you want is 
h igh

lighted and press  OK. 
7. Pre
ss the up/down arrow to select the nu mber of 
 copies to be printed or 
enter the number and press  OK. 
8. Pre
ss the up/down arrow to select the tray to use for printing.
9. Pres s OK
  to start printing the selected file.
After printing the file,  the display asks if you want 
 to print another job.
10. To print another document, press t he le
 ft/right arrow to highlight Yes and 
press  OK. Repeat from step 4.
Downloaded From ManualsPrinter.com Manuals 
						

							Using USB memory device_ 63
Otherwise, press the left/right arrow to highlight No and press  OK. 
11. Pr
ess  Stop/Clear to return to ready mode.
BACKING UP DATA
Data in the machine’s memory can be accidentally erased due to power fail -
ure or storage failure.
Backing up data
1. Insert a USB memory device into the USB memory port on your 
machine.
2. Pr
ess  Menu on the control panel.
3. Pre
ss the up/down arrow to highlight  System Setup and press OK.
4. Pre
ss the up/down arrow to highlight  Export Setting and press OK.
The machine begins backing up the data. The data is backed up to the 
USB memory.
5. Pr
ess  Stop/Clear to return to ready mode.
Restoring data
1.Insert a USB memory device (which the backup data is stored) to the 
USB memory port.
2. Pr
ess  Menu on the control panel.
3. Pre
ss the up/down arrow to highlight  System Setup and press OK.
4. Pre
ss the up/down arrow to highlight  Import Setting and press OK.
The machine begins restoring data. The data is restored to the machine.
5. Pr
ess  Stop/Clear to return to ready mode.
MANAGING USB MEMORY
You can delete image files stored on a USB memory device one by one or 
all at once by reformatting the device.
 
After deleting files or reformatting a USB memory device, files cannot 
be restored. Therefore, confirm th at you no longer need the data 
before deleting it.
Deleting an image file
1. Insert a USB memory device into the USB memory port on your 
machine.
2. Pr
ess  Menu on the control panel.
3. Pre
ss the up/down arrow to highlight  Direct USB and press OK.
4. Pre
ss the up/down arrow to highlight  File Manage and press OK.
5. Pre
ss the up/down arrow to highlight  Delete and press  OK.
6. Pre
ss the up/down arrow until the folder or file you want is highlighted 
and press  OK.
 If you see +  in the front of a folder name, there are one or more 
files or folders in the selected folder.
If you selected a file, the display sh ows th
 e size of the file for about 2 
seconds. Go to the next step.
If you selected a folder, press the up/ do
 wn arrow until the file you want 
to delete highlights and press  OK.
7. To 
delete file, press the up/down arrow to highlight Yes  and press OK.
8. Pr
ess  Stop/Clear to return to ready mode.
Formatting a USB memory device
1.Insert a USB memory device into  the USB memory port on your 
machine.
2. Pres
s  Menu on the control panel.
3. Pre
ss the up/down arrow to highlight  Direct USB and press OK.
4. Pre
ss the up/down arrow to highlight  File Manage and press OK.
5. Pre
ss the up/down arrow to highlight  Format and press  OK.
6. T
o format USB memory device, Press the up/down arrow to highlight 
Yes  and press  OK.
7. Pres
s  Stop/Clear  to return to ready mode.
Viewing the USB memory status
1.Insert a USB memory device into  the USB memory port on your 
machine.
2. Pres
s  Menu on the control panel.
3. Pre
ss the up/down arrow to highlight  Direct USB and press OK.
4. Pre
ss the up/down arrow to highlight  Check Space and press OK.
The available memory space appears on the display.
5. Pres
s  Stop/Clear  to return to ready mode.
Downloaded From ManualsPrinter.com Manuals 
						

							Machine status and advanced features_ 64
8.machine status and advanced features
This chapter explains how to browse the current status of your machine, and the method of  setting for the advanced 
machine setup. Read this chapter carefully in order to use your machines diverse features.
This chapter includes:
• Accessing the menu
• Information
• Layout
• Paper
• Graphic
• System setup   •
Emulation
• Network
• Direct USB
• Job management
• Admin Setup
  
 Some menus may not appear in the display depending on options or 
models. If so, it is not applicable to your machine.
ACCESSING THE MENU
1.Press  Menu on the control panel.
2. Press the up/down arrow to highlight desired menu item and press  OK.
3. If the setting item has sub menus, repeat step 2.
4. Press the up/down arrow to access the required value.
5. Press  OK to save the selection.
6. Press 
 to return to the ready mode.
INFORMATION
ITEMDESCRIPTION
Menu Map You can print the menu map which shows the 
layout

 and current settings of this machine.
Configuration You can print a report on the machin
e
 s overall 
configuration.
Supplies Info. You can print supplies’ information page. 
Demo Page You can print the demo page to check whether 
your machine

 is printing properly or not.
PCL Font You can print the PCL font list.
PS Font You can print the PS font list.
EPSON Font You can print the EPSON font list.
Store

d Jobs 
a
a. This menu is available only when an optional hard disk drive (HDD) has  been installed or Ram disk is enabled.
You can print jobs currently stored in the 
optiona
 l memory or hard disk drive (HDD) . 
Completed Jobs
b
b. This menu appears when optional hard disk drive (HDD) has been in -
stalled.
You can print list of completed jobs. The Com -
pleted Job page shows the list of completed 
print jobs.
Usage Counter You can print a usage page. The usage page 
contain
s

 the total number of pages printed.
AccountThis is only available when Job Accounting is 
enabled from the SyncThru™ Web Admin Ser -
vice. You can print the report of printout counts 
for  each

 login user. 
LAYOUT
ITEMDESCRIPTION
Orientation This menu allows you to select the direction in 
wh

ich information is printed on a page.
Common Margin Set the margins for print materials. The margins 
yo
 u set here will be applied when printing from 
all trays.
• Simplex Margin:  Set the margin of print 
ma te

rials for one-sided printing. 
• Duple
x Margin
a: Set the margins for dou -
ble-sided printing. 
• Binding:  When printing on both sides of 
pap er, 

side As margin closest to the binding 
will be the same as side Bs margin closest to 
the binding. Likewise, the sides margins far -
thest from the binding will be the same.
MP Tray Set the margins for print mate
 rials. The margins 
you set here will be applied when printing from 
the multi-purpose tray.
• Simplex Margin:  Set the margin of print 
ma te

rials for one-sided printing. 
• Duple
x
a: Set the margins for double-sided 
printing
. 
ITEMDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							Machine status and advanced features_ 65
PAPER
ITEMDESCRIPTION
Copies You can select the amount of copies from 1 to 
999.
MP

 Tray / [Tray]  •Paper Size:  You 
 can select the default paper 
siz
e. 
• Paper Type:  You can sel
 ect the default 
paper type 
for the print media
Paper SourceUsing this menu, you can set which tray you 
want to use.
If you select  Auto, t
 he machine can automati -
cally determine the source. 
Auto Tray Switch This is the option to set i
f
  the machine is to con-
tinue printing or not when any tray becomes 
e m

pty. For example, if both tray 1 and tray 2 are 
filled with the same size paper, the machine 
automatically prints from tray 2 after the tray 1 
runs out of paper.
 This option does not appear if you selected 
Auto  for Paper Source .
Tray Confirm You can activate tray confirmation message. If 
you op

en and close a tray, a window asking you 
whether to set the paper size and type for the 
tray just opened appears.
GRAPHIC
ITEMDESCRIPTION
Resolution You can select the default resolution. If the reso-
lution is high, the clarity of the printouts is 
sharper, but the pr

int time may take longer.
• 600
 dpi-Normal:  If yo
 ur print jobs are 
mostl
y text, select this option for the highest 
quality output.
• 120 0 dpi-Best:  Se
 lect this option when your 
job con
tains bit mapped images, such as 
scanned photos or certain business graph -
ics, that will benefit  from enha
 nced line 
screening.
Clear Text You can print texts darker than on a normal doc -
ument, select  On.
Darkness You can lighten or darken the print on the page 
b
y

 changing the toner density setting. The  Nor-
mal  setting usually produces the best result.
SYSTEM SETUP
 Set the margins for print materials. The margins 
you set  here will be applied when printing from 
the tray1 and optional trays.
• Sim plex Margin:  Set the margin 
 of print 
materials for one-sid ed printing.
• Duplex
a: Set the margins for double-sided 
printin
g.
Emulation Margin When creating an emulation print page which 
doe
s no

t include margin information, the 
machine uses the margin value set here.
• To
p Margin:  Set the top 
 margin, from 0.0 to 
250mm.
• Left Margin:  Set 
 the left margin, from 0.0 to 
164mm.
Duplex
aTo print on both sides of paper, choose the bind -
ing edge. 
• Off:  Set this option off.
• Long Edge:  Thi
 s item is the conventional 
layout 
used in bookbinding.
• Short Edge:  This item is the conventional 
layout 
used in calendars.
Landscape Stapling 
PositionbSelect the position for stapling.
a. This menu appears when duplex kit is installed  (Some features and op -
tional goods may not be available depending on models or countries).
b. You can only use this menu if you  have instal
 led the optional finisher 
and hard disk  drive (HDD). 
ITEMDESCRIPTION
ITEMDESCRIPTION
Date & Time You can set the date and time.
Clock Mode You can select the format for displaying time 
be

tween 12hr and 24hr. 
Form Menu
a• Off:  Prints in normal mode.
• Single Form:  Prints all page using the first 
form.
• Doub
le Form:  Prints the
  front page using 
the 
first form and the back page using the 
second form.
ITEMDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							Machine status and advanced features_ 66
EMULATION
ITEMDESCRIPTION
Emulation Type The machine language defines how the com -
puter communicates with the machine.
If you select  Auto, your 
 machine can change the 
machine language automatically.
Setup You can set the detailed settings for the emula -
tion type you selected.
NETWORK
Refer to the Network Setup chapter of  this User’s Guide for more informa -
tion on setting the network (see  Network setup on page 36). 
Select Form
aForm overlay is images stored in the printer 
hard disk drive (HDD) as a special file format 
that can be printed in layers on any document. 
 •
Select Form  is not displayed when 
Form Menu  is set as Off.
• 2n
d Form is displayed when  Form 
Menu  is 

set as Double Form .
HDD Spooling
aTo spool documents in HDD for the network 
printing, select  On.
Language This menu determines the language of the text 
that ap

pears on the control panel display and 
information printing.
Default Paper Size You can set the default paper size to use.
Power Save When the machine does not receive data for an 
extende

d period of time, power consumption is 
automatically lowered. Y ou can set how long the 
machine waits before  going to power save 
mode.
Wakeup Event When this option is On, you 
can 
 wake up the 
machine from the power saving mode with the 
following actions:
• Pressing  a
 ny button on the control panel.
• Loa ding paper in a tray.
• Opening or closing the front cover.
• Pull ing a tray out or pushing a tray in.
Auto Continue Thi

s menu determines whether or not the 
machine
  continues printing when it detects the 
paper unmatched to your paper setting.
• Off:  If paper mismatch occurs, the message 
wil l 

remain on the display and the machine 
will remain off-line until you insert the correct 
paper. 
• On
:  If 
paper mismatch occurs, an error 
message  will display. The machine will go 
offline for 30 seconds, then automatically 
clear the message and continue printing. 
Altitude Adjustment You can optimize print quality according to your 
altitude.
Auto CR Thi

s menu allows you to append the required 
carriage  

return to each line feed, which is useful 
to the Unix user or DOS user.
Job Timeout When there is no input for a certain period of 
ti
me

, the machine cancel s the current job. You 
can set the amount of time the machine will wait 
before canceling the job.
Multi-Bin
b• Mode:  Select the multi-bin mode you want to 
use. 
• Default Bin:  Select the bin to use as a 
defaul t.
Im

port Setting You can import data stored in the USB stick to 
the ma

chine (see  Restoring data on page  63
).
ITEMDESCRIPTION
Export Setting You can export data stored in the machine to 
the USB stick
 (see Backing up data on 
page  63).
Quiet Mode You can reduce the printing noise by turning this 
menu

 on. However the printing speed and qual -
ity maybe declined.
Eco Settings Eco mode is created to set the options that 
reduce toner an

d paper usage.
• Default Mode:  Select whether to turn the 
Eco  

mode on or off. 
- On:  Set 
 the Eco mode on.
- Off:  Set the Eco mode off.
- On
force:  Set the
  Eco mode on with 
passwor
d. If a user wants to turn the Eco 
mode on/off, the user needs to enter the 
password.
• Sel
ect Template:  You can
  select the eco 
temp
late you set from the SyncThru™ Web 
Service (see  Eco on page  69 ). 
Tray Mapping Allows you to configure the settings for Printer 
D
r

iver and Tray placement.
• Gen
eral:  wh
 en using the general Samsung 
driver.
• Co
mpatible:  wh
 en using the HP driver.
Clear Settings This menu allows you to restore the machine’s 
factory default setti

ngs. 
a. This menu only appears when an optional hard disk drive (HDD) has been installed.
b. You can only use this menu if you  h
a
 ve installed the optional finisher 
or mailbox.
ITEMSDESCRIPTION
Ethernet Speed This menu allows you to select the ethernet 
speed. 
ITEMDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							Machine status and advanced features_ 67
DIRECT USB
You can use USB memory with your machine (see  Using USB memory 
device on page  62 ).
JOB MANAGEMENT
This menu item is available when the  optional memory or hard disk drive 
(HDD) is installed (see  Printing with the optional memory or hard disk drive 
on page  104 ).
ADMIN SETUP
ITEMDESCRIPTION
Password Protect You can set the password to access the  Admin 
Setup  menu. Se

lect On to use this option and 
enter the password
Change Password You can change the password for accessing the 
Admi

n Setup . Maintenance
This menu allows you to maintain y
o
 ur machine.
• Clean Fuser:  Cle
 ans the fuser by printing a 
sheet. T
he printed sheet has toner debris on 
it. 
• Supplies Info.:  Thi
 s item allows you to 
check how many pages are printed  and how 
much toner are left in the cartridge. 
• To
nerLow Alert:  If toner in
  the cartridge 
has run 
out, a message informing user to 
change the toner cartridge appears. You can 
set the option for this message to appear or 
not.
• Ram Disk:  You can enable/disable RAM 
disk to  

manage jobs. Depending on the 
installed optional memory size, you can set 
the RAM disk size between 32 and 64 MB. 
This option does not appear if you have 
installed hard disk drive (HDD).
 Reboot the machine to apply the 
change.
802.1x You can select the user au thentication for network 
communication. For details information consult the 
network administrator.
TCP/IP(IPv4) Select appropriate protocol and configure parame -
ters to use the network environment.
 There are lots of parameters to be set; there-
fore, if you are not sure, leave as is, or con -
sult the network administrator.
TCP/IP(IPv6) Selects this option to use the network environment 
th

rough IPv6. 
Wireless
aConfigure the wireless network environments
Clear Settings This menu performs a simp le reset and r
 estores 
the factory default settings for the network configu -
ration. This setting will only take effect after you 
have reset the printer. 
Network

 Configu -
ration This menu allows you to print a page showing the 
network parame
t

ers you set. 
Net. Activate You can set to use Ethernet on  or off.
Http Activate You can set to use SyncThru™ Web Service or 
not. If 

you set this option  to “off”, users cannot 
access SyncThru™ Web Service. 
a. This menu only appears when an optional wireless network interface  has been installed.
ITEMSDESCRIPTIONITEMDESCRIPTION
Downloaded From ManualsPrinter.com Manuals 
						

							Management tools_ 68
9.management tools
This chapter introduces management tools provided to help you make full use of your machine. 
This chapter includes:
•Introducing useful management tools
• Using SyncThru™ Web Service •
Using the Smart Panel program
• Using the Unified Linux Driver Configurator
  
INTRODUCING USEFUL MANAGEMENT TOOLS
The programs below help you to use your machine conveniently.
•Using SyncThru™ Web Service on page  68.
• Using the Smart Panel program on page  69.
• Using the Unified Linux Dr iver Config
urator on pag
 e 70.
USING SYNCTHRU™ WEB SERVICE
 Internet Explorer 6.0 or higher is the minimum requirement for 
SyncThru™ Web Service.
If you have connected your machine to a network and set up TCP/IP net -
work parameters correctly, you can manage the machine via SyncThru™ 
W eb Service, an embe

dded web server. Use SyncThru™ Web Service to:
• View the machine’s device
  information and check its current status.
• Chan ge TCP/IP parameters and set up other network parameters.
• Chan ge printer preference.
• Set  the email notifications advising of the machine’s status.
• Get supp ort for 
 using the machine.
To access SyncThru™ Web Service:
1.Access a web browser, such as Internet Explorer, from Windows.
Enter the machine IP address (http://xxx.xxx.xxx.xxx) in the address 
field an

d press the Enter key or click  Go.
2. Your machine
 ’s embedded website opens.
Logging into SyncThru™ Web Service
Before configuring options in SyncThru™ Web Service, you need to 
log-in as an administrator. You can still use SyncThru™ Web Service 
without logging in but you won’t have access to  Settings tab and Secu-
rity  tab.  
1. Click  Lo
 gin on the upper right of the SyncThru™ Web Service web -
site.
A log-in page appears. 
2. Typ e in the  ID an
 d Password  then click  Login.
If it’s your first time logging into  Sync
 Thru™ Web Service, type in the 
below default ID and password.
• ID:  admin  
• Password:  sec00000 
SyncThru™ Web Service overview
 Some tabs may not appear depending on your model.
Information tab
This tab gives you general information about your machine. You can 
check things, such as the machine’s  IP address, remaining amount of 
toner, ethernet information, firmware version and more. You can also 
print reports such as an error report and so on. 
• Active Alerts
:  T
 his item allows you to check the alerts occurred in 
the ma
chine and their severity.
• Supplies:  This item allows you to check how many pages are 
printed  

and amount of toner left in the cartridge.
• Usage Counters:  T
 his item allows you to check the usage count by 
print types: simple
x, duplex .
• Current Settings:  This item allows you to check the machine and 
network information. 
• Print information:  T
 his item allows you to print reports such as sys -
te
m related reports, e mail  address and
  font reports.
Job Management tab
 You can only use this option if you have enabled RAM disk or 
installed an optional hard drive disk (HDD).
This tab allows you to delete or prin t job
 s stored in the RAM disk or an 
optional hard drive disk (HDD). Select the job from the list and click on 
the  Delete or the  Print button. 
• Active Jo
bs
 : You can see the list of jobs in queue.
• Completed Jobs:  You can see the list of 
 completed jobs. Com-
pleted Jobs  only app ears if you have installed an optional hard drive 
disk (HDD).
• St
ored Print:  You can see the list of 
 jobs saved in the RAM  disk.
• Secu red Print:  Yo
 u can see the list of secured jobs that the user 
has set i
n the printer driver. You need to enter the User ID and Pass -
word set in the printer driver to  d
 elete or print secured jobs.
Setting tab
This tab allows you to set configur ations provided by your machine and 
network. You need to log-in as an administrator to view this tab. 
• Machine Settings tab:  This tab allows you to set options provided 
by yo ur ma

chine. 
• Network Settings tab:  T
 his tab allows you to view and change the 
network environ
ment. You can set things, such as TCP/IP, network 
protocols and so on. 
Security tab
This tab allows you to set system an d network security information. You 
need to log-in as an administrator to view this tab.
• System Security:  You can set the system  admin
istra
 tor’s informa-
tion and also enable or disable machine features .
• Network Security:  You can set 
 settings for HTTPs,  IPSec, 
Downloaded From ManualsPrinter.com Manuals 
						

							Management tools_ 69
IPv4/IPv6 filtering, 802.1x, Authentication servers .
• Use
r Access Control:  You can set configurations for user accessi -
bility.
Maintenance tab
This tab allows you to maintain your machine by upgrading firmware and 
setting contact information for sending emails. You can also connect to 
Samsung website or download drivers by selecting the  Link menu.
• Firm
ware Version:  You can check your machine’s firmware version 
and
 upgrade it by using the  Upgrade Wizard button. You can only 
see the  Upgrade Wizard button if you login as an administrator.
• Contact
  Information:  You can view the contact information.
• Li
nk:  You can view the links to useful sites where you can download 
or check information . 
Eco
You can enable the Eco mode and change the custom eco settings. 
Turning the Eco mode
1.From the SyncThru™ Web Service, select the  Settings tab > 
Machine Settings  > System  > Eco  > Settings .
2. On
 the main pane, select one of the options;  On, Off , and 
On-Forced for  Eco Default Mode .
• Off:  Select to turn the Eco mode off.
• On
:  Select to turn the Eco mode on.
• On
-Forced:  Select to turn the Eco mode on with password. If a 
use
r wants to turn the Eco mode on/off, the user needs to enter 
the password.
 If you selected  On or  On-Forced, check the setting you want 
to use; Factory Default  or Custom Settings
3. Cli
ck  Apply.
Changing the Custom Settings
1.From the SyncThru™ Web Service, select the  Settings tab > 
Machine Settings  > System  > Eco  > Settings .
2. Select  On or  On-F
 orced for Eco Default Mode .
3. Select  Cu
 stom Settings.
 You cannot change the settings for  Factory Default option.
4. Cli
ck  Edit & Preview Simulator.
5. Che
ck the current settings from the  Edit & Preview Simulator win-
dow and change the settings.
6. Cli
ck on  Apply.
When you apply the changes, you can  previ
 ew the result of reduced 
emission of carbon dioxide, us ed electricity, and the amount of 
saved paper in accordance with the settings you selected. The 
results are calculated on the basis t hat the total number of printed 
pages is one hundred without a blank page when the eco mode is 
disabled.
• Referred to the calculation coefficient for CO2, energy, and paper 
from IEA, the index of Ministry  of 
 Internal Affairs and Communi-
cation of Japan, and www.remanu fa
 cturing.org.uk. Each model 
has a different index.
• The power consumption in printing mode refers to the average 
pri

nting power consumption in this machine.
• T
he actual saved or reduced amount may differ depending on the 
operating system used,  computing performance, application soft-
ware, connection method, media  type
 , media size, job complex-ity, and etc.
 The 
Undo  button clears all the values set so far.
E-mail notification setup
You can receive emails about your mach ine’s status by setting this option. 
By setting information such as IP address, host name, e-mail address and 
SMTP server information, the machine  status (toner cartridge shortage or 
machine error) will be sent to a certai n persons e-mail automatically. This 
option may be used more frequently by a machine administrator. 
1. Start 
a web browser, such as In ternet Explorer, from Windows.
Enter the machine IP  address (http://xxx.xxx.xx
 x.xxx) in the address 
field and press the Enter key or click  Go.
2. Yo
ur machine’s embedded website opens.
3.F
rom the  Settings tab, select Machine Settings  > E-mail Notification. 
 If you haven’t configured outgoing  server environment, go to Set-
tings  > Network Settings  > Outgoing M ail Server (SMTP) to 
configure network environment befo re setting e-mail notification. 
4. Click  Add 
 button to add e-mail notification user. 
Set the recipient name and e-mail address(es) with notification items 
yo
 u want to receive an alert for.
5. Click  Apply . 
 If the firewall is activated, the e-mail may not be sent successfully. In 
that case, contact the a network administrator.
Setting the system administrator information
Set the system administrato r information. This setting is necessary for using 
the e-mail notification option.
1. Start 
a web browser, such as In ternet Explorer, from Windows.
Enter the machine IP  address (http://xxx.xxx.xx
 x.xxx) in the address 
field and press the Enter key or click  Go.
2. Yo
ur machine’s embedded website opens.
3.Fro
m the  Security tab, select  System Security  > System Administra -
tor
4. En
ter the name of the adm inistrator, phone number, location and E-mail 
address. 
5. Click  Apply . 
USING THE SMART PANEL PROGRAM
Smart Panel is a program that monito rs and informs you of the machine sta -
tus, and allows you to customize the machine’s settings. For Windows and 
Mac, Smart 
Panel is installed automa tically when you install the machine 
software. For Linux, you can downl oad Smart Panel from Samsung website 
and install (See  Installing the SmartPanel on page  34 ).
 To use this program, you need th e following system requirements:
• W
indows. Check for windows opera ting system(s) compatible with 
your machine (See  System requirements on page  31 ).
• Mac OS X 10.3 or high
 er.
• Linux
. Check for Linux systems t hat are compatible with your 
machine (See  System requirements on page  31 ).
• Interne
t Explorer version 5.0 or higher for flash animation in HTML 
Help.
Downloaded From ManualsPrinter.com Manuals 
						

							Management tools_ 70
Understanding Smart Panel
If an error occurs while printing, you can check the error from the Smart 
Panel.
You can also launch Smart Panel manually. Double-click the Smart Panel 
ic

on on the Windows task bar (in Windows), or Notification Area (in Linux). 
You can also click it on the status bar (in Mac OS X).
Windows
Double-click this icon in Windows.
Mac
Click this icon in Mac OS X.
Linux
Click this icon in Linux.
Or, if you are a Windows user, you can launch it from the  Sta
 rt menu, select 
Programs  or All Programs  > Samsung Printers  > your machine name  > 
Smart Panel .
 •If you have already installed more than one Samsung machine, 
first select the correct machine mo del you want in order to access 
the corresponding Smart Panel.
Right-click (in Windows or Linux) or click (in Mac OS X) the Smart 
Panel  

icon and select your machine.
• The Smart Panel window and its contents shown in this user’s 
guid
 e may differ depending on the machine or operating system in 
use.
The Smart Panel program displays the current status of the machine, the 
e s

timated level of toner remaining in  the toner cartridge(s), and various 
other types of information. You can also change settings.
 
1
Toner Level View the level of toner remaining in the toner car -
tridge(s). The machine and the number of toner 
cartridg e(s) shown

 in the above window may differ 
depending on the machine in use. Some machines 
do not have this feature.
 
2Buy Now Order replacement toner cartridge(s) online.
 
3
User’s GuideView User’s Guide.
 This button changes to  Troubleshooting 
Guide when error occurs. You can directly 
open troubleshooting section in the user’s 
guide. 
 
4
Printer Set -
ting Configure various machine settings in the Printer 
Settings Utili
ty window. Some machines  do not 
have this feature.
 If you connect your machine to a network, 
the SyncThru™ Web Service window 
appears instead of the Printer Settings Utility 
window.
 
5
Driver Setting Set all of the machine options you need in the 
Printing Pr
eferences window. This feature is 
available only for Windows (See  Opening printing 
preferences on page  52).
Changing the Smart Pa nel Program Settings
Right-click (in Windows or Linux) or click (in Mac OS X) the Smart Panel 
icon and select Options. Select the settings you want from the  Options 
window. 
USING THE UNIFIED LI NUX DRIVER CONFIGU -
RATOR
Unified Driver Configurator is a to ol primarily intended for configuring 
machine devices. You need to install Unified Linux Driver to use Unified 
Driver Configurator (See  Installing the Linux Unified Driver on page  34 ).
After the driver is installed on your Li nu
x system, the
  Unified Driver Configu-
rator icon will automatically be created on your desktop .
Opening the Unified Driver Configurator
1.Double-click the  Unified Driver Configurator  on the desktop.
You can also click the  Startup Menu ico
 n and select Samsung Unified 
Driver  > Unified Driver Configurator .
2. C
lick each button on the left to switch to the corresponding configuration 
w
 indow.
1Printers Configu-
ration 
2Ports Configura -tion 
  To use the on screen help, click  Help.
3. After  changing the configurations, click  Exit to
  close the Unified Driver 
Configurator.
Downloaded From ManualsPrinter.com Manuals