Samsung ML 6510ND User Manual

Management tools_ 71
Printers configuration
Printers configuration has the two tabs: Printers and Classes .
Printers tab
View the current system’s printer  configuration by clicking on the 
machine icon button on the left side of the Unified Driver Configurator 
window.
 
1Switches to  Printers configuration .
 
2Shows all of the installed machine.
 
3Shows the status, model name  and URI of your machine.
The printer control buttons are, as follows:
•Refre sh: R
 enews the available machines list.
• Add...

Management tools_ 72
Ports configuration
In this window, you can view the list of available ports, check the status of 
each port and release a port that is stalled in a busy state when its owner 
has terminated the job for any reason.
 
1Switches to  Ports configuration .
 
2Shows all of the available ports.
 
3Shows the port type, device connected to the port, and status.
•Refresh:  Renews the available ports list.
• Releas e port: Rele
 ases the selected port.
Downloaded From ManualsPrinter.com Manuals 

Maintenance_ 73
10.maintenance
This chapter provides information for maintaining your machine and the toner cartridge.
This chapter includes:
•Printing a machine report
• Monitoring the supplies life
• Using Toner Low Alert •
Cleaning a machine
• Storing the toner cartridge
• Tips for moving & storing your machine
  
PRINTING A MACHINE REPORT
You can print the machines information and job report.
1.Press  Menu on
  the control panel.
2. Press the up/down arrow to highlight  Information and
  press OK.
3....

Maintenance_ 74
3.Pull the imaging unit out. Set  it on a clean flat surface.
 
•Do not touch the green su rface of the imaging unit. 
• To prevent damage to the imaging unit, do not expose it to light 
for more
  than a few minutes. Cove r it with a piece of paper, if 
necessary.
4. With a dry lint-fre e
  cloth, wipe away any dust and spilled toner.
 
•While cleaning the inside of the machine, be careful not to 
touch the transfer roller, lo cated underneath the toner car -
tridge. Oil from your...

Maintenance_ 75
Use of non-Samsung and refilled toner cartridge
Samsung Electronics does not reco mmend or approve the use of non-Sam -
sung brand toner cartridges in your  prin
 ter including generic, store brand, 
refilled, or remanufactured toner cartridges.
 
Samsung’s printer warranty does not cover damage to the machine 
caused by the use of a refilled,  remanufactured, or non-Samsung 
brand toner cartridge.
Estimated cartridge life
Estimated cartridge life (the life of  the toner cartridge yield)...

Troubleshooting_ 76
11.troubleshooting
This chapter gives helpful inform ation for what to do if you encounter an error. If your machine has a display screen, check 
the message on the display screen first to solve the error. If you cannot find a  solution in this Users Guide or the problem 
consists, call for service. 
This chapter includes:
• Redistributing toner
• Tips for avoiding paper jams
• Clearing paper jams •
Understanding display messages
• Solving other problems
  
REDISTRIBUTING TONER
When...

Troubleshooting_ 77
CLEARING PAPER JAMS
When a paper jam occurs, a warning message appears on the display 
screen. 
 
To avoid tearing the paper, pull  the jammed paper out slowly and gen -
tly. Follow the instructions in the  following
  sections to clear the jam. 
In tray 1
 Click this link to open an animation about clearing a jam.
1. Ope n and close the top cover. The jammed paper is automatically 
ejected
  from the machine.
If the paper does not exit, go to the next step.
2. Pull ou t the tray  1....

Troubleshooting_ 78
5.Open and close the top co ver to resume printing.
 
If the top cover is not completely closed, the machine will not oper -
ate.
In optional tray 2
 • Click this link to open an animation about clearing a jam.
• The  procedure is same for all optional trays.
1. Pull out the optional tray 2.
2. Remove the jammed 
 paper by pulling in the direction shown. To avoid 
tearing the paper, pull it  out gently and slowly.
If the paper does not move when you pull or if you do not see the paper...

Troubleshooting_ 79
6.Open and close the top co ver to resume printing.
 
If the top cover is not completely closed, the machine will not oper -
ate.
In the optional high capacity feeder
1. Open the cover of the optional high capacity feeder.
2.Remove the jammed paper by pulling in the direction shown. To avoid 
tearing the paper, pull it  out gently and slowly.
3.Close the optional high capacity feeder  cover.
4. Open and close the top co ver
  to resume printing.
 
If the top cover is not completely...

Troubleshooting_ 80
2.Pull the imaging unit out.
 
•Do not touch the green su rface of the imaging unit. 
• To prevent damage to the imaging unit, do not expose it to light 
for more
  than a few minutes. Cove r it with a piece of paper, if 
necessary.
3. Remove the jammed  
 paper by pulling in the direction shown. To avoid 
tearing the paper, pull it  out gently and slowly.
If you do not see the jammed paper or  if there is any resistance when 
you pull, stop and go to the next step. 4.
U
nscrew the...