Samsung ML 3470D User Manual

Installing Printer Software in Windows
7
Installing Software for Network 
Printing
When you connect your printer to a network, you must first 
configure the TCP/IP settings for the printer. After you have 
assigned and verified the TCP/IP settings, you are ready to 
install the software on each computer on the network.
You can install the printer software using the typical or custom 
method.
Typical Installation
This is recommended for most users. All components necessary 
for printer operations will be...

Installing Printer Software in Windows
8
Samsung. If you so desire, select the corresponding 
checkbox(es) and click 
Finish.
Otherwise, just click 
Finish.
NOTE: After setup is complete, if your printer driver doesn’t 
work properly, reinstall the printer driver. See “Reinstalling 
Printer Software” on page 10.
Custom Installation
You can choose individual components to install and set a 
specific IP address.
1Make sure that the printer is connected to your network 
and powered on. For details about...

Installing Printer Software in Windows
9
5The list of printers available on the network appears. 
Select the printer you want to install from the list and then 
click 
Next. 
• If you do not see your printer on the list, click 
Update to 
refresh the list, or select 
Add TCP/IP Port to add your 
printer to the network. To add the printer to the 
network, enter the port name and the IP address for the 
printer.
To verify your printer’s IP address or the MAC address, 
print a Network Configuration page.
•...

Installing Printer Software in Windows
10
Reinstalling Printer Software
You can reinstall the software if installation fails.
1Start Windows.
2From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.
3Select Repair and click Next.
4The list of printers available on the network appears. 
Select the printer you want to install from the list and then 
click 
Next. 
• If you do not see your printer on the list, click 
Update to 
refresh the list, or select 
Add TCP/IP...

Installing Printer Software in Windows
11
Removing Printer Software
1Start Windows.
2From the Start menu select Programs or All Programs 
→ your printer driver name → Maintenance.
3Select Remove and click Next.
You will see a component list so that you can remove any 
item individually.
4Select the components you want to remove and then click 
Next.
5When your computer asks you to confirm your selection, 
click 
Yes.
The selected driver and all of its components are removed 
from your computer.
6After...

Basic Printing
12
2Basic Printing 
This chapter explains the printing options and common printing 
tasks in Windows. 
This chapter includes:
• Printing a Document
• Printing to a file (PRN)
•Printer Settings
- Layout Tab
- Paper Tab
- Graphics Tab
- Extras Tab
- About Tab
- Printer Tab
- Using a Favorite Setting
- Using Help
Printing a Document
NOTES: 
• Your printer driver 
Properties window that appears in this 
User’s Guide may differ depending on the printer in use. 
However the composition of the...

Basic Printing
13
Printing to a file (PRN)  
You will sometimes need to save the print data as a file for your 
purpose. 
To create a file:
1Check the Print to file box at the Print window.
2Select the folder and assign a name of the file and then 
click OK.
Printer Settings
You can use the printer properties window, which allows you to 
access all of the printer options you need when using your 
printer. When the printer properties are displayed, you can 
review and change the settings needed for your...

Basic Printing
14
Layout Tab
The Layout tab provides options to adjust how the document 
appears on the printed page. The 
Layout Options includes 
Multiple Pages per Side,  Poster Printing and Booklet 
Printing
. See “Printing a Document” on page 12 for more 
information on accessing printer properties.  
Paper Orientation
Paper Orientation allows you to select the direction in which 
information is printed on a page. 
•
Portrait prints across the width of the page, letter style. 
•
Landscape prints...

Basic Printing
15
Source
Make sure that Source is set to the corresponding paper tray.
Use 
Manual Feeder when printing on special materials like 
envelopes and transparencies. You have to load one sheet at a 
time into the Manual Tray or Multi-Purpose Tray.
If the paper source is set to 
Auto Selection, the printer 
automatically picks up print material in the following tray order: 
Manual Tray or Multi-Purpose Tray, Tray n.
Type
Set Type to correspond to the paper loaded in the tray from 
which you...

Basic Printing
16
Advanced Options
You can set advanced settings by clicking the Advanced 
Options
 button. 
•TrueType Options: This option determines what the driver 
tells the printer about how to image the text in your document. 
Select the appropriate setting according to the status of your 
document.
- 
Download as Outline: When this option is selected, the 
driver will download any TrueType fonts that are used in your 
document not already stored (resident) on your printer. If, 
after printing a...