Samsung ML 2950ND User Manual

							211. IntroductionTurning on the machine
1Connect the machine to the electricity supply first.
Press the power key or turn the switch on if the machine has a power switch.
 2
1
Downloaded From ManualsPrinter.com Manuals 
						

							221. IntroductionInstalling the driver locally
A locally connected machine is a machine directly attached to your 
computer using the cable. If your machine is attached to a network, 
skip the following steps below and go on to installing a network 
connected machine’s driver (see Advanced Guide).
 
• If you are a Macintosh, Linux, or Unix OS user, refer to the 
Advanced guide. 
• The installation window in this User’s Guide may differ 
depending on the machine and interface in use.
•Selecting Custom Installation allows you to choose 
which programs to install. 
• Only use a USB cable no longer than 3 meters (118 inches).
 

12 
Windows
1Make sure that the machine is connected to your computer 
and powered on.
 
If the “Found New Hardware Wizard” appears during the 
installation procedure, click Cancel to close the window.
 
2 Insert the supplied software CD into your CD-ROM drive.The software CD should automatically run and an installation 
window will appear.
3 Select Install Now.
4 Read License Agreement, and select I accept the terms of 
the License Agreement. Then, click Next.
5 Follow the instructions in the installation window.
Downloaded From ManualsPrinter.com Manuals 
						

							231. IntroductionReinstalling the driver
If the printer driver does not work properly, follow the steps below to 
reinstall the driver.

13 
Windows
1Make sure that the machine is connected to your computer 
and powered on.
2 From the Start menu, select Programs or All Programs > 
Samsung Printers > your printer driver name > Uninstall.
3 Follow the instructions in the installation window.
4 Insert the software CD into your CD-ROM drive and install the 
driver again (see "Installing the driver locally" on page 22).
Downloaded From ManualsPrinter.com Manuals 
						

							2. Menu overview and basic 
setup
After installation is complete, you may want to set the machine’s default 
settings. Refer to the next section if you would like to set or change values. 
This chapter provides information about the overall menu structure and 
the basic setup options.
•Printing a demo page 25
• Media and tray 26
• Basic printing 38
Downloaded From ManualsPrinter.com Manuals 
						

							252. Menu overview and basic setupPrinting a demo page
Print a demo page to make sure that the machine is operating 
correctly.
To print a demo page:
In ready mode, press and hold   (Cancel) button for about 2 
seconds until the status LED blinks, and release. 
 
For a model with a Demo page button ( ), press the 
button to print a demo page.
 
Downloaded From ManualsPrinter.com Manuals 
						

							262. Menu overview and basic setupMedia and tray
This chapter provides information on how to load print media into 
your machine.
 
•Using print media that does not meet these specifications 
may cause problems or require repairs. Such repairs are 
not covered by Samsung’s warranty or service 
agreements.
• Make sure not to use the inkjet photo paper with this 
machine. It could cause damage to the machine. 
• Using inflammable print media can cause a fire.
• Use designated print media (see "Print media 
specifications" on page 68).
 
 
The use of inflammable media or foreign materials left in the 
printer may lead to overheating of the unit and, in rare cases 
may cause a fire.
 

1 
Tray overview
To change the size, you need to adjust the paper guides.
 
If you do not adjust the guide, it may cause paper 
registration, image skew, or jamming of the paper.
 
1Tray extention guide
2Paper length guide
3Paper width guide
 3
2
1
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray272. Menu overview and basic setup
 
Paper quantity indicator shows the amount of paper in the 
tray. 
1 Full
2 Empty
 
Paper type available for duplex printing
Depending on the power voltage your machine uses, available paper 
types for duplex printing differs. Refer to the below table. 
Power 
voltageAvailable paper
110V Letter, Legal, US Folio, Oficio
1 2
220V A4 
Power 
voltageAvailable paper
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray282. Menu overview and basic setup

2 
Loading paper in the tray
 
When printing using the tray, do not load paper on the manual feeder, it may cause a paper jam.
 
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray292. Menu overview and basic setup
Downloaded From ManualsPrinter.com Manuals 
						

							Media and tray302. Menu overview and basic setup

3 
Loading in manual feeder
The manual feeder can hold special sizes and types of print material, such as postcards, note cards, and envelopes. 
 
Tips on using the manual feeder
• Load only one type, size and weight of print media at time in the manual feeder.
• If you select Manual Feeder for the paper source in your software application, you need to press Print screen or Demo page, or WPS 
button each time you print a page and load only one type, size and weight of print media at a time on the manual tray.
• To prevent paper jams, do not add paper while printing when there is still paper in the manual feeder.
• Print media should be loaded face up with the top edge going into the manual feeder first and be placed in the center of the tray.
• To ensure printing quality and to prevent paper jams, only load the available paper (see "Print media specifications" on page 68).
• Flatten any curl on postcards, envelopes, and labels before loading them into the manual feeder.
• When printing on special media, you must follow the loading guidelines (see "Printing on special media" on page 32).
• When papers overlap when printing using the manual feeder, open tray 1 and remove the overlapping papers then try printing again. 
• When paper does not feed well while printing, push the paper in manually until it starts feeding automatically. 
• When the machine is in a power save mode, the machine does not feed paper from the manual feeder. Wake up the machine by 
pressing the power button before using the manual feeder.
 
Downloaded From ManualsPrinter.com Manuals