Samsung ML 2950ND User Manual

							Installing driver over the network212. Using a network-connected machine

7 
Macintosh
1Make sure that the machine is connected to your network and 
powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your 
Macintosh desktop.
4 Double-click the MAC_Installer folder > Installer OS X icon.
5  Click Continue.
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
8 When the message which warns that all applications will close 
on your computer appears, click Continue.
9 Click Continue on the User Options Pane.
 
If you have not set the IP address yet, click Set IP address and 
refer to "IPv4 configuration using SetIP (Macintosh)" on page 
15. If you want to set the wireless setting, refer to "Setup 
using Macintosh" on page 45.
 
10 Click Install. All components necessary for machine 
operations will be installed.
If you click Customize, you can choose individual 
components to install.
11 Enter the password and click OK.
12 Installing software requires you to restart your computer. Click 
Continue Installation.
13 After the installation is finished, click Close.
/f”” 
or
/F””Specifies log 
filename.
The default log file is 
created in the system 
temp folder if not 
specified.It will create a log file to a 
specified folder.
/h, /H or /? Shows Command-line 
Usage.
Command- lineDefinitionDescription
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network222. Using a network-connected machine
14 Open the Applications folder > Utilities > Print Setup 
Utility.
• For Mac OS X 10.5-10.6, open the Applications folder > 
System Preferences and click Print & Fax.
15 Click Add on the Printer List.
• For Mac OS X 10.5-10.6, click the “+” icon. A display window 
will pop up. 
16 For Mac OS X 10.4, click IP Printer.
• For Mac OS X 10.5-10.6, click IP.
17 Select HP Jetdirect - Socket in Protocol.
 
When printing a document containing many pages, printing 
performance may be enhanced by choosing Socket for 
Printer Type option.
 
18 Enter the machine’s IP address in the Address input field.
19 Enter the queue name in the Queue input field. If you cannot 
determine the queue name for your machine server, try using 
the default queue first.
20 F o r  M a c  O S  X  1 0 . 4 ,  i f  A u t o  S e l e c t  d o e s  n o t  w o r k  p r o p e r l y ,  s e l e c t  
Samsung in Print Using and your machine name in Model. 
• For Mac OS X 10.5-10.6, if Auto Select does not work 
properly, choose Select Printer Software and your 
machine name in Print Using.
21 Click Add.
Your machine appears in the Printer List, and is set as the 
default machine.

8 
Linux
You need to download Linux software packages from the Samsung 
website to install the printer software (http://www.samsung.com/
printer).
 
To install other software:
• See "Installing the Smart Panel" on page 8.
• See "Installing the Printer Settings Utility" on page 9.
 
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network232. Using a network-connected machine
Install the Linux driver and add network printer
1Make sure that the machine is connected to your network and 
powered on. Also, your machine’s IP address should have 
been set. 
2 Download the Unified Linux Driver package from the 
Samsung website.
3 Extract the UnifiedLinuxDriver.tar.gz file and open the new 
directory.
4 Double-click the Linux folder > install.sh icon.
5 The Samsung installer window opens. Click Continue.
6 The add printer wizard window opens. Click Next.
7 Select network printer and click Search button.
8 The machine’s IP address and model name appears on list 
field.
9 Select your machine and click Next.
10 Input the printer description and Next.
11 After the machine is added, click Finish.
12 When installation is done, click Finish.
Add a network printer
1Double-click the Unified Driver Configurator.
2 Click Add Printer.
3 The Add printer wizard window opens. Click Next.
4 Select Network printer and click the Search button.
5 The printer’s IP address and model name appears on list field.
6 Select your machine and click Next.
7 Enter the printer description and click Next.
8 After the machine is added, click Finish.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network242. Using a network-connected machine

9 
UNIX
 
• Make sure your machine supports the UNIX operating 
system before installing the UNIX printer driver (see basic 
guide)
• The commands are marked with “”, when typing the 
commands, do not type “”.
 
To use the UNIX printer driver, you have to install the UNIX printer 
driver package first, then setup the printer. You can download the 
UNIX printer driver package from the Samsung website.
Installing the UNIX printer driver package
The installation procedure is common for all variants of UNIX OS 
mentioned.
1From the Samsung website, download and unpack the UNIX 
Printer Driver package to your computer. 
2 Acquire root privileges.
“su -”
3 Copy the appropriate driver archive to the target UNIX 
computer.
 
See administration guide of your UNIX OS for details.
 
4 Unpack the UNIX printer driver package.
For example, on IBM AIX, use the following commands.
“gzip -d < enter the package name | tar xf -”
5 Go to the unpacked directory.
6 Run the install script.
“./install”
install is the installer script file which is used to install or 
uninstall the UNIX Printer Driver package.
Use “chmod 755 install” command to give the permission to 
the installer script.
7 Execute the “. /install –c” command to verify installation 
results.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network252. Using a network-connected machine
8 Run “installprinter” from the command line. This will bring up 
the Add Printer Wizard window. Setup the printer in this 
window referring to the following procedures.
 
On some UNIX OS, for example on Solaris 10, just added 
printers may not be enabled and/or may not accept jobs. In 
this case run the following two commands on the root 
terminal:
“accept ”
“enable ”
 
Uninstalling the printer driver package
 
The utility should be used to delete the printer installed in 
the system.
a Run “uninstallprinter” command from the terminal.
It will open the Uninstall Printer Wizard.
The installed printers are listed in the drop-down list.
b Select the printer to be deleted.
c Click Delete to delete the printer from the system.
d Execute the “. /install –d” command to uninstall the whole 
package.
e To verify removal results, execute the “. /install –c” 
command.
 
To re-install it, use the command “. /install” to reinstall the binaries.
Setting up the printer
To add the printer to your UNIX system, run ‘installprinter’ from the 
command line. This will bring up the Add Printer Wizard window. 
Setup the printer in this window according to the following steps:
1Type the name of the printer.
2 Select the appropriate printer model from the model list.
3 Enter any description corresponding to the type of the printer 
in the Type field. This is optional.
4 Specify any printer description in the Description field. This is 
optional.
5 Specify the printer location in the Location field.
6 Type the IP address or DNS name of the printer in the Device 
textbox for network-connected printers. On IBM AIX with 
jetdirect Queue type, only the DNS name is possible-numeric 
IP address is not allowed.
Downloaded From ManualsPrinter.com Manuals 
						

							Installing driver over the network262. Using a network-connected machine
7 Queue type shows the connection as lpd or jetdirect in the 
corresponding list box. Additionally, usb type is available on 
Sun Solaris OS.
8 Select Copies to set the number of copies.
9 Check the Collate option to receive copies already sorted.
10 Check the Reverse Order option to receive copies in the 
reverse order.
11 Check the Make Default option to set this printer as default.
12 Click OK to add the printer.
Downloaded From ManualsPrinter.com Manuals 
						

							272. Using a network-connected machineIPv6 configuration
 
IPv6 is supported properly only in Windows Vista or higher.
 
 
If the IPv6 network seems to not be working, set all the 
network setting to the factory defaults and try again using 
Clear Setting.
 
In the IPv6 network environment, follow the next procedure to use 
the IPv6 address.

10 
From the control panel
1Connect your machine to the network with a network cable.
2 Turn on the machine.
3 Print a Network Configuration Report that will check IPv6 
addresses (see "Printing a network configuration report" on 
page 13).
4 Select Start > Control Panel > Printers and Faxes.
5 Click Add a printer in the left pane of the Printers and Faxes 
windows.
6 Click Add a local printer in the Add Printer windows.
7 The Add Printer Wizard window appears. Follow the 
instructions in the window.
 
If the machine does not work in the network environment, 
activate IPv6. Refer to the next section followed by.
 
Activating IPv6
1Press the   (Menu) button on the control panel.
2 Press Network > TCP/IP (IPv6) > IPv6 Activate.
3 Select On and press OK.
4 Turn the machine off and turn it on again.
5 Reinstall your printer driver.
Downloaded From ManualsPrinter.com Manuals 
						

							IPv6 configuration282. Using a network-connected machine
Setting IPv6 addresses
The machine supports the following IPv6 addresses for network 
printing and managements.
•Link-local Address: Self-configured local IPv6 address (Address 
starts with FE80).
•Stateless Address: Automatically configured IPv6 address by a 
network router.
•Stateful Address: IPv6 address configured by a DHCPv6 server.
•Manual Address: Manually configured IPv6 address by a user.
►DHCPv6 address configuration (Stateful)
If you have a DHCPv6 server on your network, you can set one of the 
following options for default dynamic host configuration.
1Press the   (Menu) button on the control panel.
2 Press Network > OK > TCP/IP (IPv6) > OK > DHCPv6 Config.
3 Press OK to select the required value you want.
•DHCPv6 Addr.: Always use DHCPv6 regardless of router 
request.
•DHCPv6 Off: Never use DHCPv6 regardless of router 
request.•Router: Use DHCPv6 only when requested by a router.

11 
From the SyncThru™ Web Service
 
For models that do not have the display screen on the 
control panel, you need to access SyncThru™ Web Service 
first using the IPv4 address and follow the below procedure 
to use IPv6.
 
1Access a web browser, such as Internet Explorer, from 
Windows. Enter the machine IP address (http://
xxx.xxx.xxx.xxx) in the address field and press the Enter key or 
click Go.
2 If it’s your first time logging into SyncThru™ Web Service you 
need to log-in as an administrator. Type in the below 
default ID and password.
•ID: admin
•Password: sec00000 
3 When the SyncThru™ Web Service window opens, move the 
mouse cursor over the Settings of the top menu bar and then 
click Network Settings.
Downloaded From ManualsPrinter.com Manuals 
						

							IPv6 configuration292. Using a network-connected machine
4 Click TCP/IPv6 on the left pane of the website.
5 Check the IPv6 Protocol check box to activate IPv6.
6 Check the Manual Address check box. Then, the Address/
Prefix text box is activated.
7 Enter the rest of the address (e.g.,:3FFE:10:88:194::AAAA. “A” is 
the hexadecimal 0 through 9, A through F).
8 Choose the DHCPv6 configuration.
9 Click the Apply button.
Using SyncThru™ Web Service
1Start a web browser, such as Internet Explorer, that supports 
IPv6 addressing as a URL.
2 Select one of the IPv6 addresses (Link-local Address, 
Stateless Address, Stateful Address, Manual Address) from 
Network Configuration Report (see "Printing a network 
configuration report" on page 13).
3 Enter the IPv6 addresses (e.g.,: http://
[FE80::215:99FF:FE66:7701]).
 
Address must be enclosed in '[ ]' brackets.
 
Downloaded From ManualsPrinter.com Manuals 
						

							302. Using a network-connected machineWireless network setup
 
Make sure your machine supports a wireless network. 
Wireless network may not be available depending on the 
model.
 

12 
Getting started
Understanding your network type
Typically, you can only have one connection between your 
computer and the machine at a time.
Wireless network name and network key
Wi reless  netw orks  requ ire h ig her sec ur ity, s o wh en an  ac cess  poi nt  i s 
first set up, a network name (SSID), the type of security used, and a 
Network Key are created for the network. Locate this information 
before proceeding with the machine installation.

13 
Choosing the installation type
You can install a wireless network from the machine’s control panel 
or the computer. 
From the control panel
For most users, we recommend using the   (WPS) button to 
configure the wireless network settings.
• (WPS): If your machine and an access point (or wireless router) 
support Wi-Fi Protected Setup™ (WPS), you can easily configure 
the wireless network settings by pressing the   (WPS) button on 
the control panel (see "Using the WPS button" on page 31).
•Control panel: You can configure wireless parameters with the 
control panel (see "Using the menu button" on page 35 ).
Infrastructure mode
T hi s  i s  an  en v i ro n me n t g en e ra l l y  us ed  f or  ho me s  an d  
SOHOs (Small Office/ Home Office). This mode uses 
an access point to communicate with the wireless 
machine.
Ad hoc mode
This mode does not use an access point. The wireless 
computer and wireless machine communicates 
directly. 
Downloaded From ManualsPrinter.com Manuals