Samsung ML 2950ND User Manual

							ML-295x Series
User’s Guide
Advanced
imagine the possibilities
This guide provides information about installation, advanced configuration, operation and 
troubleshooting on various OS environments.
Some features may not be available depending on model or country.
Downloaded From ManualsPrinter.com Manuals 
						

							2Contents
1. Software installation
5Installation for Macintosh
7Reinstallation for Macintosh
8Installation for Linux
10Reinstallation for Linux
2. Using a network-connected 
machine
12Useful network programs
13Wired network setup
17Installing driver over the network
29IPv6 configuration
32Wireless network setup
3. Useful setting menus
59Information
60Layout
61Paper
62Graphic
63System setup66Emulation
67Network
68Admin setup
4. Special features
70Altitude adjustment
71Changing the font setting
72Changing the default print settings
73Setting your machine as a default machine
74Using advanced print features
82Using Direct Printing Utility (Windows only)
84Using memory/hard drive features
86Macintosh printing
88Linux printing
90Unix printing
5. Maintenance
93Storing the toner cartridge
95Tips for moving & storing your machine
96Useful management tools
Downloaded From ManualsPrinter.com Manuals 
						

							Contents3
6. Troubleshooting
108Paper feeding problems
109Power and cable connecting problems
110Printing problems
114Printing quality problems
122Operating system problems
Contact SAMSUNG worldwide
Glossary
Downloaded From ManualsPrinter.com Manuals 
						

							1. Software installation
This chapter provides instructions for installing essential and helpful software 
for use in an environment where the machine is connected via a cable. A locally 
connected machine is a machine directly attached to your computer using the 
cable. If your machine is attached to a network, skip the following steps below 
and go on to installing a network connected machine’s driver (see Installing 
driver over the network17).
• Installation for Macintosh 5
• Reinstallation for Macintosh 7
• Installation for Linux 8
• Reinstallation for Linux 10
† • If you are a Windows OS user, refer to the Basic Guide for installing the 
machine’s driver.
• Only use a USB cable no longer then 3 meter (118 inches).
Downloaded From ManualsPrinter.com Manuals 
						

							51. Software installationInstallation for Macintosh
1Make sure that the machine is connected to your computer 
and powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your 
Macintosh desktop.
4 Double-click the MAC_Installer folder > Installer OS X icon.
5 Click Continue.
6 Read the license agreement and click Continue.
7 Click Agree to agree to the license agreement.
8 When the message that warns that all applications will close 
on your computer appears, click Continue.
9 Click Continue on the User Options Pane.
10 Click Install. All components necessary for machine 
operations will be installed.
If you click Customize, you can choose individual 
components to install.
11 Enter the password and click OK.
12 Installing software requires you to restart your computer. Click 
Continue Installation.
13 After the installation is finished, click Close.
14 Open the Applications folder > Utilities > Print Setup 
Utility.
• For Mac OS X 10.5 -10.6, open the Applications folder > 
System Preferences and click Print & Fax.
15 Click Add on the Printer List.
• For Mac OS X 10.5 -10.6, click the “+” folder icon; a display 
window will pop up.
16 Click Default Browser and find the USB connection.
• For Mac OS X 10.5-10.6, click Default and find the USB 
connection.
17 F o r  M a c  O S  X  1 0 . 4 ,  i f  A u t o  S e l e c t  d o e s  n o t  w o r k  p r o p e r l y ,  s e l e c t  
Samsung in Print Using and your machine name in Model.
• For Mac OS X 10.5-10.6, if Auto Select does not work 
properly, select Select a driver to use... and your machine 
name in Print Using. 
Your machine appears on the Printer List, and is set as the 
default machine.
Downloaded From ManualsPrinter.com Manuals 
						

							Installation for Macintosh61. Software installation
18 Click Add.
Downloaded From ManualsPrinter.com Manuals 
						

							71. Software installationReinstallation for Macintosh
If the printer driver does not work properly, uninstall the driver and 
reinstall it.
1Make sure that the machine is connected to your computer 
and powered on.
2 Insert the supplied software CD into your CD-ROM drive.
3 Double-click the CD-ROM icon that appears on your 
Macintosh desktop.
4 Double-click the MAC_Installer folder > Uninstaller OS X 
icon.
5 Enter the password and click OK.
6 When the uninstall is done, click OK.
 
If a machine has already been added, delete it from the Print 
Setup Utility or Print & Fax.
 
Downloaded From ManualsPrinter.com Manuals 
						

							81. Software installationInstallation for Linux
You need to download Linux software packages from the Samsung 
website to install the printer software (http://www.samsung.com > 
find your product > Support or Downloads).
1 
Installing the Unified Linux Driver
1Make sure that the machine is connected to your computer 
and powered on.
2 When the Administrator Login window appears, type “root” 
in the Login field and enter the system password.
 
You must log in as a super user (root) to install the machine 
software. If you are not a super user, ask your system 
administrator.
 
3 From the Samsung website, download the Unified Linux 
Driver package to your computer.
4 Right-click the Unified Linux Driver package and extract the 
package.
5 Double click cdroot > autorun.
6 When the welcome screen appears, click Next.
7 When the installation is complete, click Finish.
The installation program added the Unified Driver Configurator 
desktop icon and the Unified Driver group to the system menu for 
your convenience. If you have any difficulties, consult the on-screen 
help that is available through your system menu or from the driver 
package Windows applications, such as Unified Driver 
Configurator or Image Manager.
2 
Installing the Smart Panel
1Make sure that the machine is connected to your computer 
and powered on.
2 When the Administrator Login window appears, type in root 
in the Login field and enter the system password.
 
You must log in as a super user (root) to install the machine 
software. If you are not a super user, ask your system 
administrator.
 
3 From the Samsung website, download the Smart Panel 
package to your computer.
Downloaded From ManualsPrinter.com Manuals 
						

							Installation for Linux91. Software installation
4 Right-click the Smart Panel package and extract the package. 
5 Double click cdroot > Linux > smartpanel > install.sh.
3 
Installing the Printer Settings Utility
1Make sure that the machine is connected to your computer 
and powered on.
2 When the Administrator Login window appears, type “root” 
in the Login field and enter the system password.
 
You must log in as a super user (root) to install the machine 
software. If you are not a super user, ask your system 
administrator.
 
3 From the Samsung website, download the Printer Settings 
Utility package to your computer.
4 Right-click the Printer Settings Utility package and extract 
the package.
5 Double click cdroot > Linux > psu > install.sh.
Downloaded From ManualsPrinter.com Manuals 
						

							101. Software installationReinstallation for Linux
If the printer driver does not work properly, uninstall the driver and 
reinstall it.
1Make sure that the machine is connected to your computer 
and powered on.
2 When the Administrator Login window appears, type “root” 
in the Login field and enter the system password.
You must log in as a super user (root) to uninstall the printer 
driver. If you are not a super user, ask your system 
administrator.
3 Click the icon at the bottom of the desktop. When the 
Terminal screen appears, type in the following.
[root@localhost root]#cd /opt/Samsung/mfp/uninstall/
[root@localhost uninstall]#./uninstall.sh
4 Click Uninstall.
5 Click Next.
6 Click Finish.
Downloaded From ManualsPrinter.com Manuals