Samsung ML 1630W User Manual

6.6   
Caution
• Do not touch the green surface, the OPC drum or the front of 
each toner cartridge, with your hands or any other material. 
Use the handle on each cartridge in order to avoid touching 
this area.
• If you leave the top cover open for more than a few minutes, 
the OPC drum can be exposed to light. This will cause 
damage to the OPC drum. Close the top cover should the 
installation need to be halted for any reason.
Note
If toner gets on your clothing, wipe it off with a dry cloth and...

6.7   
Managing your machine from the website
If you have connected your machine to a network and set up TCP/IP 
network parameters correctly, you can manage the machine via 
Samsung’s SyncThru™ Web Service, an embedded web server. Use 
SyncThru™ Web Service to:
• View the device information and check its current status.
• Change TCP/IP parameters and set up other network parameters.
• Change the printer properties.
• Set the machine to send email notifications and update you on the 
machine’s status.
•...

7.1   
7 Troubleshooting
This chapter gives helpful information on what to do if you encounter a 
problem.
This chapter includes:
• Tips for avoiding paper jams
• Clearing paper jams
• Understanding display messages
• Solving other problems
Tips for avoiding paper jams
By selecting the correct media types, most paper jams can be avoided. 
When a paper jam occurs, follow the steps outlined on page 7.1. 
• Follow the procedures on page 4.5. Ensure that the adjustable guides 
are positioned correctly.
• Do...

7.2   
4Align the tray with the slot, and slide it into the machine.    
5Press the top cover lever, completely open the top cover.   
6Hold the top cover and close it slowly and carefully, until the cover is 
securely latched.   
Note
If the top cover is not completely closed, the machine will not 
operate.
Caution
Be careful not to pinch your fingers, since the top cover is very 
heavy.     
7If the paper jam LED blinks, go to next step.
8Open the rear cover.
9Carefully take the jammed paper out of the...

7.3   
10Hold both edges of the rear cover, and align it as shown in the 
following figure. Press the rear cover firmly until it clicks. 
Note
If the rear cover is not completely closed, the paper jam may 
occur.
11Open and close the top cover firmly. The machine will resume 
printing. 
Rear and inside the machine
If paper is jammed in the rear and inside the machine, follow the next 
steps to release the jammed paper.
1Open the rear cover.
2Carefully take the jammed paper out of the machine. 
Caution
Do...

7.4   
4Press the top cover lever, completely open the top cover.   
5Hold the top cover and close it slowly and carefully, until the cover is 
securely latched.   
Note
If the top cover is not completely closed, the machine will not 
operate.
Caution
Be careful not to pinch your fingers, since the top cover is very 
heavy.     
6If the paper jam LED blinks, go to next step.
7Press the top cover lever, completely open the top cover.   
8Grasp the handles on the toner cartridge and pull to remove the...

7.5   
10After removing the jammed paper, check for paper which may be 
jammed in other parts of the machine.
11Slide the toner cartridge back into the machine.   
  
12Close the top cover firmly. The machine will resume printing.    
In the exit area
If paper is jammed in the paper exit area, follow the next steps to release 
the jammed paper.
1Press the top cover lever, completely open the top cover.   
2If a long portion of the paper is visible, pull it straight out.     
If there is any resistance...

7.6   
3Hold the top cover and close it slowly and carefully, until the cover is 
securely latched.   
Note
If the top cover is not completely closed, the machine will not 
operate.
Caution
Be careful not to pinch your fingers, since the top cover is very 
heavy.     
4Open the inner cover. 
Caution
Do not touch the fuser inside the machine. It is hot and could 
cause burns! The fusers operating temperature is very hot. 
Take care when removing paper from the machine.
5Carefully take the jammed paper out...

7.7   
Understanding display messages
Messages appear on the Smart Panel program window or on the control 
panel display to indicate machine status or errors. Refer to the tables 
below to understand the messages meaning to correct the problem, if 
necessary. 
Note
When you call for service, it is very convenient to provide the 
service representative with the contents of the display message. 
          
Status displayExplanationSolution
OPEN The covers is not 
completely closed.Press the covers until it...

7.8   
Solving other problems
The following chart lists some conditions that may occur and the 
recommended solutions. Follow the suggested solutions until the 
problem is corrected. If the problem persists, please call for service.
Paper feeding problems
ConditionSuggested solutions
Paper is jammed 
during printing.Clear the paper jam. (See Clearing paper 
jams on page 7.1.)
Paper sticks 
together.• Ensure that there is not too much paper in the 
tray. The tray can hold up to 100 sheets of 
paper.
•...