Samsung ML 1630W User Manual

v
EU Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, 
France (with frequency restrictions), Germany, Greece, Hungary, Ireland, 
Italy, Latvia, Lithuania, Luxembourg, Malta, The Netherlands, Poland, 
Portugal, Slovakia, Slovenia, Spain, Sweden and the U.K.
EEA/EFTA countriesIceland, Liechtenstein, Norway and Switzerland
European States with restrictions on use:
EUIn France, the frequency range is restricted to 2446.5-2483.5 MHz for 
devices above 10 mW transmitting power such as...

vi
If the wires in the mains lead do not match the colors marked in your plug, do 
the following:
You must connect the green and yellow wire to the pin marked by the letter 
“E” or by the safety ‘Earth symbol’ or colored green and yellow or green.
You must connect the blue wire to the pin which is marked with the letter “N” 
or colored black.
You must connect the brown wire to the pin which is marked with the letter “L” 
or colored red.
You must have a 13 amp fuse in the plug, adaptor, or at the...

1.1   
1 Introduction
Thank you for purchasing this Samsung multifunctional product. Your 
machine provides printing functions.
This chapter includes:
• Special features
• Machine overview
• Control panel overview
Caution
•This product is high glossy. Please be careful of surface scratch 
during installation.
Special features
Your new machine is equipped with special features.
Print with excellent quality and speed
• You can print with a resolution of up to 1200 dpi 
class 
Effective output. 
• Your...

1.2   
Machine overview
These are the main components of your machine.
Front view 
      
Note 
• All illustrations on this user’s guide may differ from your machine.
• The surface of the output tray may become hot if you print a large number of pages at once. Please make sure that you do not touch the surface, 
and do not allow children near it.
1control panel6tray open button
2top cover7top cover lever
3output tray8toner cartridge
4output support9
inner cover
5tray
Downloaded From ManualsPrinter.com...

1.3   
Rear view 
     
1
rear cover4
USB port
2
power switch5
Network port
3
power receptacle
Downloaded From ManualsPrinter.com Manuals 

1.4   
Control panel overview  
display
1Shows the current status and prompts during an operation. The message shows with specific LEDs as below. LEDs are working with short 
message on a display.
• error LED
Blinks when the error occurs on your machine. If it blinks rapidly, the machine has stopped for some reason. Check the display message to 
solve the problem.
• paper LED
Blinks when the paper in the tray is empty. 
• toner LED
Blinks when the estimated cartridge life of toner is close, or toner...

2.1   
2 Software overview
This chapter gives you an overview of the software that comes with your 
machine. Further details on how to use the software are explained in the 
Software section.
This chapter includes:
• Supplied software
• Printer driver features
• System requirements
Supplied software
After you have set up your machine and connected it to your computer, 
you must install the printer software. If you are a Windows or Macintosh 
OS, install the software from the supplied CD and if you are a...

2.2   
Printer driver features
Your printer drivers support the following standard features:
• Paper size, orientation and media type
• Number of copies
In addition, you can use various special printing features. The following 
table shows a general overview of features supported by your printer 
drivers:    
System requirements
Before you begin, ensure that your system meets the following 
requirements:
Windows
Your machine supports the following Windows operating systems. 
FeatureWindowsLinuxMacintosh...

2.3   
Linux
Macintosh
Operating System
Requirements (recommended)
CPURAMfree HDD 
space
RedHat 8.0, 9.0 
(32bit)
• Pentium IV 
2.4GHz 
(IntelCore2)• 512 MB 
(1024 MB)1 GB 
(2GB) RedHat Enterprise 
Linux WS 4, 5 
(32/64bit)
Fedora Core 1~7 
(32/64bit)
Mandrake 9.2 (32bit), 
10.0, 10.1 (32/64bit)
Mandriva 2005, 2006, 
2007 (32/64bit)
SuSE Linux 8.2, 9.0, 
9.1 (32bit)
SuSE Linux 9.2, 9.3, 
10.0, 10.1, 10.2 
(32/64bit)
SuSE Linux Enterprise 
Desktop 9, 10  
(32/64bit)
Ubuntu 6.06, 6.10, 
7.04 (32/64bit)...

3.1   
3 Getting Started
This chapter gives you step-by-step instructions for setting up the 
machine.
This chapter includes:
• Setting up the hardware
• Setting up the network
• Using a wired network
• Using a wireless network
• Altitude adjustment
Setting up the hardware
This section shows the steps to set up the hardware which is explained 
in the Quick Install Guide. Make sure you read Quick Install Guide and 
complete following steps.
1Select a stable location. 
Select a level, stable place with...