Samsung ML 1630W User Manual

4.3   
Specifications on print media
Note 
• Due to the nature of the product, the envelope type of media cannot be used with your machine. 
•Use the print media type mentioned below only.     
    
Note 
•When you use the thick paper (90 to 120 g/m2, 24 to 32 lb bond), select Thick Paper in the paper type. See 4.6 page.
• When you use the thin paper (under 70 g/m
2, under 19 lb bond), select Thin Paper in the paper type. See 4.6 page.
• When you use the recycled paper, select Recycled Paper in the paper...

4.4   
Guidelines for special print media
Media typeGuidelines
Transparencies • To avoid damaging the machine, use only 
transparencies designed for use in laser 
machines.
• Transparencies used in the machine must be 
able to withstand the machine’s fusing 
temperature. Check your machine’s specification 
to view the fusing temperature, see page 9.1.
• Place them on a flat surface after removing them 
from the machine.
• Do not leave them in the paper tray for long 
periods of time. Dust and dirt may...

4.5   
Loading paper in the tray
Load the print media you use for the majority of your print jobs in the tray. 
The tray can hold a maximum of 100 sheets of 75 g/m2 (20 lb bond) plain 
paper. 
1Press the tray open button, then the tray pops out. Pull the tray 
completely out.     
Note
When the tray does not close properly, pull the tray half way out 
and try again.
2Place paper with the side you want to print facing down.
3Align the tray with the slot, and slide it into the machine.
    
4After loading...

4.6   
2After inserting paper into the tray, while pinching the paper width 
guide as shown, move it toward the stack of paper until it lightly 
touches the side of the stack. Do not press the guide too tightly to 
the edge of the paper; the guide may bend the paper. 
Note
• Do not push the paper width guides far enough to cause the 
materials to warp.
• If you do not adjust the paper width guides, it may cause paper 
jams.  
Setting the paper size and type
The settings you change remain in effect only...

5.1   
5 Basic printing
This chapter explains common printing tasks. Your machine allows you to 
print from various Windows, Macintosh, or Linux applications. 
Note
The following procedure is for Windows operating system. 
For Linux and Macintosh, see Software section.
Printing a document
The exact steps for printing a document may vary depending on the 
application you use.
1Open the document you want to print.
2Select Print from the File menu. The Print window is displayed. It 
may look slightly...

6.1   
6 Maintenance
This chapter provides information for maintaining your machine and the 
toner cartridge.
This chapter includes:
• Printing a machine report
• Cleaning your machine
• Maintaining the cartridge
• Redistributing toner
• Replacing the toner cartridge
• Maintenance Parts
• Managing your machine from the website
Printing a machine report
Press and hold Stop/Clear button for about 4 seconds to print a 
machine report.
Cleaning your machine
To maintain print quality, follow the cleaning...

6.2   
3With a dry lint-free cloth, wipe away any dust and spilled toner from 
the toner cartridges area and their cavities. 
Note
If toner gets on your clothing, wipe it off with a dry cloth and 
wash it in cold water. Hot water sets toner into fabric. 
4Locate the long strip of glass (LSU) inside the front door, and gently 
swab the glass to see if dirt turns the white cotton black.        
5Slide the toner cartridge back into the machine.
6Hold the top cover and close it slowly and carefully, until...

6.3   
Maintaining the cartridge
Toner cartridge storage
Toner cartridges contain components that are sensitive to light, 
temperature, and humidity. Samsung suggests users follow the 
recommendations to ensure the optimum performance, highest quality, 
and longest life from your new Samsung toner cartridge.
Store this cartridge in the same environment as the printer it will be used 
in; this should be in controlled office temperature and humidity conditions. 
The toner cartridge should remain in its...

6.4   
3Holding side edges of the toner cartridge, thoroughly rock it from 
side to side to redistribute the toner.
Caution
• Do not touch the green surface, the OPC drum or the front of 
the toner cartridge, with your hands or any other material. 
Use the handle on each cartridge in order to avoid touching 
this area.
• If you leave the top cover open for more than a few minutes, 
the OPC drum can be exposed to light. This will cause 
damage to the OPC drum. Close the top cover should the 
installation...

6.5   
Replacing the toner cartridge
• The toner LED( ) blinks rapidly and the toner-related messages on 
the display indicate when toner cartridge should be replaced. 
For detailed information about error message, see page  7.7. 
• The machine stops printing.
At this stage, the toner cartridge needs to be replaced. Check the type of 
toner cartridge for your machine. (See Supplies on page 8.1.)
1Turn the machine off, then wait a few minutes for the machine to 
cool.
2Press the top cover lever,...