Samsung LN-S2641D TFT-LCD Television User Manual

							English-49
How to Enable/Disable the V-Chip
1.Press the MENU button to display the menu.
Press the or buttons to select “Setup”, then press the ENTERbutton.
2.Press the or buttons to select “V-Chip”, then press the ENTERbutton.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.The “V-Chip” screen will appear. 
To enable the V-Chip feature, press the ENTERbutton so that the “V-Chip Lock”
field is “On”. (Pressing the or buttons will alternate between “On” and “Off”.) 
Press the ENTERbutton.
Press the 
EXITbutton to exit.
How to Set up Restrictions Using the “TV Parental Guidelines”
First, set up a personal identification number (PIN), and enable the V-Chip. (See previous section.) 
Parental restrictions can be set up using either of two methods: The TV guidelines or the MPAA rating.
1.Press the MENU button to display the menu.
Press the or buttons to select “Setup”, then press the ENTERbutton.
2.Press the or buttons to select “V-Chip”, then press the ENTERbutton.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 49 
						

							English-50
3.The “V-Chip” screen will appear. Press the or buttons to select “TV Parental
Guidelines”, then press the ENTERbutton.
4.The “TV Parental Guidelines” screen will appear.
Press the or buttons to select one of the six aged based categories:
5.At this point, one of the TV-Ratings is selected.
Press the ENTERbutton. Depending on your existing setup, the “     ” symbol will 
be selected. (Blank = Unblocked,      = Blocked)
While “     ” is selected, press the 
ENTERbutton to block or unblock the category.
To select a different TV-Rating, press the or buttons and then repeat the process.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
The TV-Y, TV-Y7, TV-G, TV-PG, TV-14 and TV-MA have additional options. See the next step to 
change any of the following sub-ratings: 
FV: Fantasy violence / D: Sexually Suggestive Dialog / L: Adult Language / 
S: Sexual situation / V: Violence
The V-Chip will automatically block certain categories that are “more restrictive”. For example, 
if you block “TV-Y” category, then TV-Y7 will automatically be blocked. Similarly, if you block the 
TV-G category, then all the categories in the “young adult” group will be blocked  
(TV-G, TV-PG, TV-14, and TV-MA). The sub-ratings (D, L, S, V) work together similarly. 
(See next section.)
6.How to set the FV, D, L, S and V sub-ratings.
First, select one of these TV-Ratings: TV-Y, TV-Y7, TV-G, TV-PG, TV-14, or TV-MA
(See Step 4, on previous page), and press the 
button. The “     ” symbol will be 
displayed for each sub-rating.
While “     ” is selected, press the 
ENTERbutton to go to a sub rating. 
Press ENTERto block the sub rating. To select a different TV-Rating, 
press the or buttons and then repeat the process. 
The V-chip will automatically block certain categories that are “More restrictive”. 
For example, if you block “L” sub-rating in TV-PG, then the “L” sub-ratings in TV-14 and 
TV-MA will automatically be blocked.
7.Press the MENU button to clear all the screens. (Or proceed to the next section, 
and set up additional restrictions based on the MPAA codes.)
These categories consist of two separate groups: TV-Y and TV-Y7 
(young children through age 7), and TV-G through TV-MA (everybody else). 
The restrictions for these two groups work independently: If a household includes very 
young children as well as young adults, the TV guidelines must be set up separately for 
each age group. (See next step.)
• TV-Y:   Young children
• TV-Y7: Children 7 and over• TV-G:   General audience
• TV-PG: Parental guidance
• TV-14:  Viewers 14 and over
• TV-MA: Mature audience
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 50 
						

							English-51
How to Set up Restrictions Using the MPAA Ratings: G, PG, PG-13, R, NC-17, X, NR
The MPAA rating system uses the Motion Picture Association of America (MPAA) system, and its main application is for movies. 
When the V-Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MPAA
or TV-Ratings).
1.Press the MENU button to display the menu.
Press the or buttons to select “Setup”, then press the ENTERbutton.
2.Press the or buttons to select “V-Chip”, then press the ENTERbutton.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.The “V-Chip” screen will appear. Press the or buttons to select “MPAA Rating”,
then press the ENTERbutton.
4.The “MPAA Rating” screen will appear. Repeatedly press the or buttons to 
select a particular MPAA category. Pressing the or buttons will cycle through 
the MPAA categories:
Press the 
EXITbutton to exit.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
While a particular category is selected, press the 
ENTERbutton to activate it.
The “     ” symbol will be displayed. Press the ENTERbutton to block or unblock 
the category.
The V-Chip will automatically block any category that is “more restrictive”. 
For example, if you block the “PG-13” category, then “R”, “NC-17” and “X”  will automatically 
be blocked also.
• G:General audience (no restrictions).
• PG:Parental guidance suggested.
• PG-13:Parents strongly cautioned.
• R:Restricted. Children under 17 should be accompanied by an adult.
• NC-17:No children under age 17. 
• X:Adults only.
• NR:Not rated.
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 51 
						

							English-52
How to Set up Restrictions Using the ‘Canadian English’
1.Press the MENU button to display the menu.
Press the or buttons to select “Setup”, then press the ENTERbutton.
2.Press the or buttons to select “V-Chip”, then press the ENTERbutton.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.The “V-Chip” screen will appear. Press the or buttons to select 
“Canadian English”, then press the ENTERbutton.
4.Press the or buttons to select a appropriate restriction.
Press the ENTERbutton to activate the restriction selected. The “     ” symbol is 
indicated.
Press the 
EXIT button to exit.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
• E:Exempt programming includes...news, sports, documentaries and other information 
programming, talk shows, music videos, and variety programming.
• 
C:Programming intended for children under age 8.
• 
C8+:Programming generally considered acceptable for children 8 years and over to watch 
on their own.
• 
G:General programming, suitable for all audiences.
• 
PG:Parental Guidance.
• 
14+:Programming contains themes or content which may not be suitable for viewers under
the age of 14.
• 
18+:Adult programming.
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 52 
						

							English-53
How to Set up Restrictions Using the ‘Canadian French’
1.Press the MENU button to display the menu.
Press the or buttons to select “Setup”, then press the ENTERbutton.
2.Press the or buttons to select “V-Chip”, then press the ENTERbutton.
The message “Enter PIN” will appear. Enter your 4 digit PIN number.
3.The “V-Chip” screen will appear. Press the or buttons to select 
“Canadian French”, then press the ENTERbutton.
4.Press the or buttons to select a appropriate restriction.
Press the ENTERbutton to activate the restriction selected. The “     ” symbol is 
indicated.
Press the 
EXIT button to exit.
Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
• E:Exempt programming includes...news, sports, documentaries and other information
programming, talk shows, music videos, and variety programming.
• 
G:General.
• 
8 ans+:Not recommended for young children.
• 
13 ans+:Programming may not be suitable for children under the age of 13.
• 
16 ans+:Programming is not suitable for children under the age of 16.
• 
18 ans+: Programming restricted to adults.
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 53 
						

							English-54
Identifying Problems
If the TV seems to have a problem, first try this list of possible problems and solutions.
If none of these troubleshooting tips apply, call your nearest Samsung service center.
Problem
Poor picture
Poor sound quality.
No picture or sound.
No sound or sound is too low at 
maximum volume.
Picture rolls vertically.
The TV operates erratically.
The TV won’t turn on.
Remote control malfunctions
“Check signal cable” message.
“Not Supported Mode” message.
Digital broadcasting screen 
problem.
The image is too light or too dark.
Horizontal bars appear to flicker,
jitter or shimmer on the image.
Vertical bars appear to flicker, 
jitter or shimmer on the image.
Screen is black and power 
indicator light blinks steadily.
Image is not stable and may appear
to vibrate when you have a 
computer connected to the PC input.
Image is not centered on the screen.
If a still image is displayed for 
an extended period of time, residual
images or blurring may appear. 
Possible Solution
Try another channel.
Adjust the antenna.
Check all wire connections.
Try another channel.
Adjust the antenna.
Try another channel.
Press the SOURCE button.
Make sure the TV is plugged in.
Check the antenna connections.
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD, cable 
broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Check all wire connections.
Unplug the TV for 30 seconds, then try operating it again.
Make sure the wall outlet is working.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
Ensure that the signal cable is firmly connected to the PC source.
Check the maximum resolution and the frequency of the Video Adapter.
Compare these values with the data in the Display Modes.
Please check the digital signal strength and input antenna.
Adjust the Brightness and Contrast.
Adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
Adjust the Coarse tuning and then adjust the Fine tuning.
On your computer check: Power, Signal Cable.
The TV is using its power management system. 
Move the computer's mouse or press any key on the keyboard. 
If the setting is not correct, use your computer utility program to change the display settings.
Your TV supports multiscan display functions within the following frequency domain:
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
When you need to leave the monitor unused for an extended period of time, adjust the settings so 
that the monitor automatically goes into energy saving mode or activates the screen saver to display
moving images.
Horizontal frequency (kHz) 
Vertical frequency (Hz)
PC Maximum refresh rate
(at 60 Hz)30~60
60~75
1360 x 768
The TFT LCD panel uses a panel consisting of sub pixels (LN-S2641D: 3,147,264, LN-S3241D: 3,147,264, LN-S4041D: 3,147,264) which
require sophisticated technology to produce. However, there may be few bright or dark pixels on the screen. These pixels will have no impact
on the performance of the product.
Appendix
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 54 
						

							English-55
Installing the Stand
1.Place the TV faced down on a soft cloth or cushion on a table.
2.Put the stand into the hole at the bottom of the TV.
3.Insert screw into the hole indicated and tighten.
< 2 >< 3 >
Disconnecting the Stand
1.Place the TV faced down on a soft cloth or cushion on a table.
2.Remove four screws from the back of the TV.
3.Separate the stand from the TV.
4.Cover the bottom hole with a cap.
< 2 >< 3 >< 4 >
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 55 
						

							English-56
Components (Sold separately)
1   Mark the location on the wall where the hole will be drilled.
Make over 35 mm-depth-hole on the marked location using drill.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting anchors into the wall-bracket
.
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2  Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Attach the set-bracket onto the rear side of the TV set and secure the screws .
3  Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the TV on the wall, first connect the cables.
Wall-Bracket Set-Bracket Screw: 8 EAWood Screw: 4 EAAnchor: 4 EAInstallation Guide
M4 X L20M4 X L15
Installing the Wall Mount Kit (LN-S2641D)
This installation is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
This LCD TV accepts a 200 mm x 100 mm VESA-compliant mounting interface pad.
How to assemble the Wall Mount Bracket
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 56 
						

							English-57
Components (Sold separately)
1   Mark the location on the wall where the hole will be drilled.
Make over 35 mm-depth-hole on the marked location using drill.
Fix anchors on each hole on the wall.
Connect wall-bracket to the wall with wood screws after fitting anchors into the wall-bracket
.
Note: If the bracket is not firmly fixed to the wall, LCD TV can fall off.
2  Turn the power off and unplug the power cord from the outlet.
Place the TV faced down on a soft cloth or cushion on a table.
Attach the set-bracket onto the rear side of the TV set and secure the screws .
3  Insert three Hangers of the set-bracket into the grooves of the wall-bracket .
Fix set-bracket and wall-bracket with screws .
Note: Before installing the TV on the wall, first connect the cables.
Wall-Bracket Set-BracketScrew: 8 EAWood Screw: 7 EAAnchor: 7 EA Screw: 3 EAInstallation Guide
M4 X L20M5 X L12
Installing the Wall Mount Kit (LN-S3241D, LN-S4041D)
This installation is to be used when attaching the wall mount to a wall.
When attaching to other building materials, please contact your nearest dealer.
This LCD TV accepts a 200 mm x 200 mm VESA-compliant mounting interface pad.
How to assemble the Wall Mount Bracket
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 57 
						

							English-58
1.Insert the locking device into the Kensington slot on the LCD TV (Figure 1), and turn it in the locking direction (Figure 2).
2.Connect the Kensington lock cable.
3.Fix the Kensington lock to a desk or a heavy stationary object.
Using the Anti-Theft Kensington Lock
The Kensington lock is a device used to physically fix the system when using it in a public place. The locking device has to be purchased separately. 
The appearance and locking method may differ from the illustration depending on the manufacturer.
Please refer to the manual provided with the Kensington lock for proper use.
Figure 2
Figure 1
Cable

Specifications
Model Name
Screen Size (Diagonal)
Power Supply
Power Consumption
PC Resolution
Sound
Output
Dimensions (WxDxH)Body
With stand
WeightWith stand
Environmental ConsiderationsOperating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
LN-S2641D
26 inch
AC110V-120V
60Hz
133 W
1360 x 768 @ 60 Hz
5W X 2
29.69 X 3.11 X 18.31 inches
(754 X 79 X 465 mm)
29.69 X 8.90 X 20.43 inches
(754 X 226 X 519 mm)
23.59 lbs (10.7 kg)
50 °F to 104 °F (10 °C to 40 °C)10% to 80%, non-condensing-4 °F to 113 °F (-20 °C to 45 °C)5% to 95%, non-condensing
LN-S3241D
32 inch
AC110V-120V
60Hz
165 W
1360 x 768 @ 60 Hz
10W X 2
35.14 X 3.23 X 21.42 inches
(892.5 X 82 X 544 mm)
35.14 X 9.80 X 24.21 inches
(892.5 X 249 X 615 mm)
30.64 lbs (13.9 kg)
50 °F to 104 °F (10 °C to 40 °C)10% to 80%, non-condensing-4 °F to 113 °F (-20 °C to 45 °C)5% to 95%, non-condensing
LN-S4041D
40 inch
AC110V-120V
60Hz
218 W
1360 x 768 @ 60 Hz
10W X 2
43.33 X 3.74 X 26.02 inches
(1100.5 X 95 X 661 mm)
43.33 X 12.99 X 28.84 inches
(1100.5 X 330 X 732.5 mm)
52.25 lbs (23.7 kg)
50 °F to 104 °F (10 °C to 40 °C)10% to 80%, non-condensing-4 °F to 113 °F (-20 °C to 45 °C)5% to 95%, non-condensing
The place of the  Kensington Lock may be different depending on its model.
BN68-01001A-01Eng.qxd  2/15/06 7:11 AM  Page 58