Samsung LN-R269D TFT-LCD Television User Manual

							\fnglish\b15
CONN\fCTIONS
Note: For an explanation of Component video, see your DVD player owner's manual.  Be sure to match the component video and audio connections. For example, if connecting 
the video cable to COMPON\fNT IN 1, connect the audio cable to COMPON\fNT IN 1 also.
*  \fach external input source device has a different back panel configuration.
Co\f\fecti\fg a DVD Playe\b
The rear panel jacks on your TV make it easy to connect a DVD player to your TV.
1Conne\ft \bn \budio
\f\bble between the
COMPONENT IN 1 or
COMPONENT IN 2
[R-AUDIO-L] j\b\fks on
the TV \bnd
the AUDIO OUT j\b\fks
on the DVD pl\byer.
2Conne\ft \b
Component C\bble
between the
COMPONENT IN 1 or
COMPONENT IN 2
[P
R, PB, Y] j\b\fks on
the TV \bnd the 
COMPONENT [Y, P
B,
PR]  j\b\fks on the DVD
pl\byer.Audio C\bble (Option)
Component C\bble (Option)
DVD Pl\byer Re\br P\bnel
TV Re\br P\bnel
Audio C\bble (Option)
DVD Pl\byer Re\br P\bnel
TV Re\br P\bnel
Co\f\fecti\fg a Camco\bde\b(LN-R329D, LN-R409D, LN-R469D)
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
They allow you to view the camcorder tapes without using a VCR.
1Conne\ft \bn \budio
\f\bbles between the
AV IN 2 / S-VIDEO 2
[
R-AUDIO-L ]
j\b\fks on the TV \bnd
the AUDIO OUT j\b\fks
on the \f\bm\forder.
2Conne\ft \b video \f\bble
between the
AV IN 2 / S-VIDEO 2
[ VIDEO ]
(or S-VIDEO)
j\b\fk on the TV \bnd
the VIDEO OUT
j\b\fk on the 
\f\bm\forder.
Audio C\bble (Option) Video C\bble (Option)
C\bm\forder TV Side P\bnel
Audio C\bble (Option)
C\bm\forder TV Side P\bnel
S-Video C\bble (Option)
or
*  When connecting an external device, match the color of the connection terminal to the cable.
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 15 
						

							\fnglish\b16
Co\f\fecti\fg a DVD Playe\b/Set-Top Box via DVI
This can be applied only if there is a DVI Output connector on the external device.
*  \fach external input source device has a different back panel configuration.
1
Conne\ft \b DVI to HDMI
\f\bble or DVI-HDMI
Ad\bpter between the
HDMI/DVI \fonne\ftor on
the TV \bnd the DVI
\fonne\ftor on the DVD
pl\byer/Set-Top Box.
2
Conne\ft \bn \budio
\f\bble between the 
DVI IN [
R-AUDIO-L ]
j\b\fk on the TV \bnd the
AUDIO OUT
j\b\fks on the DVD
pl\byer/Set-Top Box.
DVI to HDMI C\bble (Option) Audio C\bble (Option)
DVD Pl\byer / Set-Top Box
TV Re\br P\bnel
DVI to HDMI C\bble (Option)
DVD Pl\byer / Set-Top Box
TV Re\br P\bnel
Co\f\fecti\fg a DVD Playe\b/Set-Top Box via HDMI
This can be applied only if there is the HDMI Output connector on the external device.
1
Conne\ft \bn HDMI
\f\bble between the
HDMI/DVI \fonne\ftor
on the TV \bnd the
HDMI \fonne\ftor on
the DVD pl\byer/
Set-Top Box.
What is HDMI?  •HDMI, or high\bdefinition multimedia interface, is a next\bgeneration interface that enables the transmission
of digital audio and video signals using a single cable without compression.
•“Multimedia interface” is a more accurate name for it especially because it allows multiple channels of
digital audio (5.1 channels). The difference between HDMI and DVI is that the HDMI device is smaller in
size, has the HDCP (High Bandwidth Digital Copy Protection) coding feature installed, and supports 
multi\bchannel digital audio.
HDMI C\bble (Option)
DVD Pl\byer Re\br P\bnel
TV Re\br P\bnel
CONN\fCTIONS
*  When connecting an external device, match the color of the connection terminal to the cable.
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 16 
						

							\fnglish\b17
CONN\fCTIONS
Co\f\fecti\fg a PC
TV Re\br P\bnel
D-Sub \f\bble (Option) PC1
Conne\ft \b D-Sub
\f\bble between PC IN
[PC] \fonne\ftor on the
TV \bnd the PC output 
\fonne\ftor on your 
\fomputer. 
PC Audio C\bble (Option)
TV Re\br P\bnel
D-Sub \f\bble (Option) PC
2
Conne\ft \b PC \budio
\f\bble between PC IN
[AUDIO] j\b\fk on the
TV \bnd the Audio Out
j\b\fk of the sound \f\brd
on your \fomputer.
Co\f\fecti\fg a\f Amplifie\b/DVD Home Theate\b
1Conne\ft \bn \budio
\f\bble between the
AUDIO OUT
[R-AUDIO-L] on the
TV \bnd AUDIO IN
[R-AUDIO-L] on the
Amplifier/DVD Home
The\bter.
Audio C\bble (Option)
Amplifier/DVD Home The\bter
TV Re\br P\bnel
Note: 5.1CH broadcasting is possible when it is connected to an external device supporting 5.1CH. 
For an explanation of Component video, see your Digital Audio System owner's manual. 
Co\f\fecti\fg a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
1Conne\ft \bn opti\f\bl
\f\bble between the
DIGITAL AUDIO OUT
(OPTICAL) j\b\fks on
the TV \bnd the Digit\bl
Audio Input j\b\fks on
the Digit\bl Audio
System.Digit\bl Audio System
TV Re\br P\bnel
Opti\f\bl C\bble (Option)
*  \fach external input source device has a different back panel configuration.
*  When connecting an external device, match the color of the connection terminal to the cable.
01 BN68-00910A-03Eng.qxd  10/20/05 3:28 PM  Page 17 
						

							Englis\b-18
CO\f\fECTIO\fS
Connect\bng Cab\feCARD (LN-R409D, LN-R469D)
You mu\bt obta\fn a CableCARD from a local cable \berv\fce prov\fder.
TV Rear Panel
1
In\bert the CableCARD \fnto the “CableCARD” \blot and the me\b\bage “CableCARD In\berted” \f\b
d\f\bplayed on the \bcreen. If the channel \fnformat\fon doe\b not ex\f\bt, the me\b\bage “Updat\fng
Channel L\f\bt” \f\b d\f\bplayed dur\fng channel \fnformat\fon conf\fgurat\fon.
It could take \beveral m\fnute\b to update the channel \fnformat\fon depend\fng on your cable
\berv\fce prov\fder.
2
The pa\fr\fng \fnformat\fon conta\fn\fng a telephone number, CableCARD ID, Ho\bt ID, and other
\fnformat\fon w\fll be d\f\bplayed \fn about 2~3 m\fnute\b. If an error me\b\bage \f\b d\f\bplayed, plea\be
contact your \berv\fce prov\fder.
3
When the channel \fnformat\fon conf\fgurat\fon ha\b f\fn\f\bhed, the me\b\bage “Updat\fng
Completed” \f\b d\f\bplayed, \fnd\fcat\fng that the channel l\f\bt \f\b now updated.
4
The Channel l\f\bt can now be d\f\bplayed by pre\b\b\fng the CH.LIST button.
RF Cable
CableCARD
\fote
• Once t\be c\bannel list \bas been updated, only t\be c\bannels on t\be c\bannel list can be selected.
• Remove t\be cable card by carefully pulling it out wit\b your \bands since dropping t\be cable card may 
cause damage to it.
01 BN68-00910A-03Eng.qxd  10/20/05 5:34 PM  Page 18 
						

							Englis\b-19
Chapte\b 3
OPE\fATION
Chang\fng Channels
Us\fng the Channel Buttons
1
Press \bhe CH /b\f\b\bons \bo change channels. 
W\ben you press t\be CH/buttons, t\be TV c\banges c\bannels in sequence.
You will see all t\be c\bannels t\bat t\be TV \bas memorized. (T\be TV must \bave 
memorized at least t\bree c\bannels). You will not see c\bannels t\bat were eit\ber 
erased or not memorized. See pages 21-28 to memorize c\bannels.
Us\fng the PRE-CH Button to select the P\bev\fous Channel
1
Press \bhe PRE-CHb\f\b\bon.The TV will swi\bch \bo \bhe las\b channel viewed.
To quickly switc\b between two c\bannels t\bat are far apart, tune to one c\bannel,
t\ben use t\be number button to select t\be second c\bannel. T\ben use t\be P\fE-CH
button to quickly alternate between t\bem.
Adjust\fng the Volume
1
Press \bhe VOL +/– b\f\b\bons \bo increase or decrease \bhe vol\fme. 
1
Press MUTEand \bhe so\fnd c\f\bs off. 
The word “” 
will appear in
\bhe lower-lef\b corner of \bhe screen.
2
To \b\frn m\f\be off, press \bhe MUTEb\f\b\bon again, or simply press \bhe VOL +/-b\f\b\bons.
Us\fng Mute
At any time, you can cut off t\be sound using t\be MUTEbutton.
Tu\bn\fng the TV On and Off
1
Press \bhe  POWERb\f\b\bon
on \bhe remo\be.
Yo\f can also \fse \bhe 
POWER
b\f\b\bon on \bhe fron\b of \bhe panel.
01 BN68-00910A-03Eng.qxd  10/22/05 11:16 AM  Page 19 
						

							Englis\b-20
V\few\fng the D\fsplay
T\be display identifies t\be current c\bannel and t\be status
of certain audio-video settings.  
V\few\fng the Menus
T\be screen displays
disappear after about ten seconds.
Press t\be INFO button once more
or wait approximately 10 seconds
and it disappears automatically.1
Press \bhe INFOb\f\b\bon on \bhe
remo\be con\brol.
The TV will display \bhe
channel, \bhe \bype of so\fnd,
and \bhe s\ba\b\fs of cer\bain
pic\b\fre and so\fnd se\b\bings.
1
Wi\bh \bhe power on, press
\bhe MENUb\f\b\bon.
The main men\f appears
on \bhe screen. I\bs lef\b
side has six icons: 
Inp\f\b, Pic\b\fre, So\fnd,
Channel, Se\b\fp, G\fide. 
T\be on-screen menus
disappear from t\be screen after
about two minutes.
2
Use \bhe UP/DOWNb\f\b\bons \bo selec\b one of \bhe six icons.
Then press \bhe 
ENTERb\f\b\bon \bo access \bhe icon’s
s\fb-men\f.
3Press \bhe EXITb\f\b\bon \bo exi\b.
OPE\fATION
01 BN68-00910A-03Eng.qxd  10/22/05 11:17 AM  Page 20 
						

							\fnglish\b21
OP\fRATION
Plug & Play Featu\be
When the TV is initially powered on, two basic customer settings proceed
automatically and subsequently:
1
Press the POWERbutton
on the remote \fontrol.
The mess\bge 
“Menu l\bngu\bge, Ch\bnnels 
\bnd 
Time will be set.” 
is displ\byed
. Press the 
ENTERbutton, then 
“Sele\ft the l\bngu\bge of the
OSD” menu is \butom\bti\f\blly 
displ\byed.
2
Press the ENTERbutton
to enter the l\bngu\bge.
Press the 
UP/DOWNbuttons  to sele\ft l\bngu\bge,
then the ENTERbutton.
“Sele\ft the \bntenn\bs to
memorize.” menu is 
\butom\bti\f\blly displ\byed.
3
Press the UP/DOWN
buttons to memorize the
\fh\bnnels of the sele\fted
\fonne\ftion.
Press the 
ENTERbutton
to sele\ft “St\brt”.
• If the antenna is connected  to ANT 1(CABL\f),
select “CABL\f” and if it is
connected to ANT 2
(AIR), select “AIR”.
• If both ANT 1 and ANT 2  are connected, select
the “Air + Cable”.
• If the CableCARD is  inserted into the 
“CableCARD” slot on the 
rear panel, “Cable” and 
“Air+Cable” are not  available.
\bome \f\bD can be different depending on the model.
01 BN68-00910A-03Eng.qxd  10/20/05 3:29 PM  Page 21 
						

							\fnglish\b22
OP\fRATION
4-1
Press the UP/DOWNbuttons to sele\ft “C\bble” or
“Air+C\bble” then press the
ENTERbutton.
Press the 
UP/DOWN
buttons to sele\ft “STD”, 
“HRC” or “IRC”, press the 
ENTERbutton.
STD, HRC and IRC  identify various types of 
cable  TV systems. 
Contact your local cable 
company to identify the 
type of cable system that 
exists in your particular 
area. 
At this point the signal  source has been selected. 
Proceed to “Storing 
Channels in Memory”.(LN-R269D / LN-R329D)
4-2
Press the UP/DOWNbuttons to sele\ft “Digit\bl
Ch\bnnel”, then press the
ENTERbutton.
Press the 
UP/DOWN
buttons to sele\ft “STD”, 
“HRC” or “IRC”, press the 
ENTERbutton.
Press the UP/DOWNbuttons to sele\ft “An\blog
Ch\bnnel”, then press the
ENTERbutton.
Press the 
UP/DOWNbuttons to sele\ft “STD”,
“HRC” or “IRC”, press the
ENTERbutton.
Press the UP/DOWNbuttons to sele\ft “St\brt”,
then press the ENTERbutton to memorize the
\fh\bnnels.
(LN-R409D / LN-R469D)
01 BN68-00910A-03Eng.qxd  10/20/05 3:29 PM  Page 22 
						

							\fnglish\b23
OP\fRATION
5
The TV will begin 
memorizing \bll of the 
\bv\bil\bble \fh\bnnels. 
After \bll the \bv\bil\bble 
\fh\bnnels \bre stored, the 
Auto progr\bm menu 
re\bppe\brs. Press the 
ENTERbutton when 
\fh\bnnel memoriz\btion is 
\fomplete. “Set to d\bylight 
s\bvings time.” menu is 
\butom\bti\f\blly displ\byed.
6
Press the ENTERbutton.
Press the UP/DOWNbuttons to sele\ft “Yes” or
“No”, then the ENTERbutton. “Sele\ft your time
zone in whi\fh you live”
menu is \butom\bti\f\blly 
displ\byed.
Note
• To stop the search before  it has finished, press the 
ENTERbutton with stop selected.
01 BN68-00910A-03Eng.qxd  10/20/05 3:29 PM  Page 23 
						

							\fnglish\b24
OP\fRATION
If you wa\ft to \beset this featu\be...
1
Press the MENUbutton.
Press the 
UP/DOWNbuttons to sele\ft “Setup”,
then press the ENTERbutton. 
2
Press the UP/DOWNbuttons to sele\ft 
“Plug & Pl\by”. 
Press the 
ENTERbutton.
For further det\bils on setting 
up options, refer to the 
previous p\bge. 
Note
•  Plug and Play can only be accessed in the TV mode.
7
Press the UP/DOWNbuttons to highlight the time
zone for your lo\f\bl \bre\b
(\bnd to move the  highlight
to the \bppropri\bte time 
zone on the m\bp of the 
United St\btes).
Press the 
ENTER
button. If you h\bve re\feived 
\b digit\bl sign\bl, the time will 
be set \butom\bti\f\blly. 
If not, see p\bge 76 to set 
the \flo\fk.
8
The mess\bge “Completed. 
Time will be upd\bted 
\butom\bti\f\blly.” is displ\byed. 
When you h\bve finished,
press the 
ENTER
button.
01 BN68-00910A-03Eng.qxd  10/20/05 3:29 PM  Page 24